Mazda surname oil in the engine. Car oils and everything you need to know about motor oils. Lubricant for the Mazda CX5 engine

Mazda engine oil change can be carried out using different petroleum products. Some motorists choose only original lubricants. Others, for various reasons, prefer to fill the engine with an engine oil similar to the original.

The use of the most expensive car oil is sometimes impractical. To make the right choice, you need to accurately determine your own requests, take into account the technical characteristics of the motor.

Standards

It is not surprising that the manufacturer and official dealers recommend pouring only original oils into the engine. The manufacturer's strict recommendations apply exclusively to gasoline engines in vehicles used in Europe. Accordingly, it is necessary to pour original Mazda Dekselia oils into such internal combustion engines. This oil product can be marked as 5W30 / 10W40. Motorists claim that 5W30 is poured into Mazda engines more often than any other oil fluid.

The latest technologies have allowed the creation of Ultra greases. These include synthetics intended for:

  • gasoline engines (without or with catalysts, multivalve, turbocharged);
  • diesel engines that are installed in passenger cars or minibuses (turbocharged, with direct injection and natural air intake).

The original oil can be distinguished by the fact that it significantly saves fuel. This advantage is especially true in low-temperature conditions, when automotive lubricant retains six percent of the fuel.


 Original MAZDA oil

Ultra oils were specially developed for Mazda engines. They can be used in different operating conditions. They provide excellent protection of timing parts from rapid wear.

DPF greases are made specifically for the new diesel engine. They can be used in engines equipped with a soot filter.

What kind of oil to pour into a Mazda engine? Judging by the information from many forums, the recommended option is 5W20. The exception is Mazda 6 MPS, which cannot be filled with such a lubricant. It is necessary to refer to the tolerances, carry out the selection of oil in accordance with the API SL or ACEA A3 range.

The above group may include oil products that are resistant to various influences, have a long period of operation. The driver usually uses in harsh conditions, and they do not need to be changed frequently.

Gasoline ICEs used outside Europe are not subject to strict manufacturer requirements. The approvals are as follows: API / SG / SH / SJ / SL, ILSAG GF-2/3.

What kind of oil is better for pouring into diesel power units? The manufacturer recommends using 5W30. It is undesirable to use other lubricants.

Selection of car oil

In order to choose a good car oil for Mazda, you need to take into account:

  • the generation to which the vehicle brand belongs;
  • characteristics of the power unit (volume, type of fuel used, absence / presence of turbocharging);
  • production date;
  • vehicle mileage, operating conditions;
  • grease change intervals;
  • type of mounted oil filter.

 Engine oil functions

The best option is to fill in a car oil belonging to one of the following brands:

  • "Aral Hai Tronic G";
  • Castrol Edge;
  • "Mobile 1 Esp Formula";
  • Liquid Moli Top Tech;
  • Motul Expert;
  • Shell Helix Ultra;
  • Zeke Top.

The viscosity coefficient of the above lubricants according to SAE is 5W30. It is necessary to replace the consumable in the "Mazda" engine every ten thousand kilometers or annually.

Online lubricant selection

For motorists having difficulty choosing an oil, special websites can help. They provide acceleration and concretization of the choice of oil fluid.

Autoselection of lubricant is especially useful for drivers who own a used machine. In addition, it will be useful to owners of old cars who have lost service books and manuals.

To find out what kind of lubricant to pour into the internal combustion engine, you will need to fill out a special form. It is necessary to enter into it:

  • date of manufacture of the motor;
  • vehicle brand;
  • body type;
  • type of engine, its volume;
  • VIN code.

It is worth remembering that original petroleum products differ from analogue ones by a higher price. Not every motorist can afford to buy the original. In an effort to save money, you cannot go too far. You need to understand how to recognize a counterfeit petroleum product. This way you will avoid wasting your own money.

How to distinguish an original car oil from a fake? The fake consumable has a different color and smells like burning. In addition, counterfeits are usually sold at suspicious retail outlets. Buy oil from regular stores to avoid bumping into a fake product.

How much oil the motorist poured into the engine depends on the characteristics of the power unit. To clarify the amount of car oil poured into the engine, contact an experienced motorist or an employee of the service center. In general, beginners can be recommended to entrust the filling of fresh consumables to car service workers. In addition, if you purchased your car from an authorized dealer, you can entrust the maintenance of the car to him. This is especially true for inexperienced motorists who have just started driving.

Sooner or later, the mechanisms of the power unit are subject to wear and deformation. To avoid this process, it is necessary to fill in high-quality grease and observe the replacement frequency. Therefore, many owners of Mazda cars are interested in the question of what kind of oil to pour into the engine and in what volume.

According to the technical regulations from the manufacturer Mazda, it is recommended to pour the factory fluid of the same brand into the internal combustion engine of cars. When replacing and scheduled maintenance, it is also necessary to use original car oils. Of course, the car owner can choose other options, but only if they meet the tolerances and standards of a particular model.

Factory oil for Mazda 3

According to the Mazda 3 manufacturer's regulations, it is recommended to use Original Oil Ultra with a viscosity of 5w30 for a gasoline engine. For a diesel engine - Original Oil Ultra DPF 5w30. At the moment, the original lubricants for Mazda 3 power units are produced by Total in volumes of 1 and 5 liters. It is also worth paying attention to the fact that the canister may not have special markings Total. In the past, factory oil was produced under the Dexelia brand.

Oil for gasoline and diesel engines for Mazda 3

For power units on a gasoline basis Mazda 3 with volumes of 1.5 and 1.6 liters, the synthetic product 5w30 is recommended. The oil fill volume is 4 liters.

As for diesel engines with volumes of 1.6 liters, 5w30 synthetics are also recommended for them. Recommended for use factory lubricant Mazda Total or similar:

  • Mobil Super 3000;
  • Liqui Moly AA 5w30;
  • X1 Formula FE 5w30.

Engine oil for Mazda 2

According to technical regulations, the manufacturer recommends replacing the engine fluid with Mazda 2 and the oil filter every 15,000 km. It is best to fill in the original Dexilia or Total with a viscosity of 5w 20, 5w 30.

Alternatively, you can use:

  • Total Quartz Energy 0w30;
  • Mobil 1 AFE 0w30;
  • Shell Helix 5w30.

Engine lubricant for Mazda 6

It is recommended to pour synthetics with a viscosity level of 5w-30 into Mazda 6 GH engines of the II generation. Manufacturers use Dexelia factory auto oil. However, as an alternative, subject to the tolerances and regulations from the automaker, it also recommends filling in:

  • Elf Evolution 900 SXR 5w30;
  • Liqui Moly Speciat Tec 5w30;
  • Total Quartz 9000;
  • Idemitsu Zepro 5w30;
  • Motul 8100 eco-lite 5w30.

Volume for Mazda power units:

  • 1.8 MZR - 4.3 L;
  • 2.0 MZR - 4.3 L;
  • 2.2 DT - 4.7L;
  • 2.5 MZR - 5 HP

Replacement interval - 15,000 km or once a year.

Engine oil for Mazda 5

According to technical regulations, the oil change interval on a Mazda 5 is 15,000 km. Some car owners prefer to replace them when they reach 5,000 or 10,000 kilometers.

For filling, manufacturers recommend using proprietary Mazda Dexelia Ultra 5w30 liquid on a synthetic basis for off-season use. Alternatively, Motul or Mobile 1 are acceptable. The filling volume is 5 liters.

Engine oil for Mazda Demio

The replacement interval is from 10,000 to 15,000 km. It is recommended to fill in Total Quartz, Shell Helix Ultra, Zepro Touring, Totachi with viscosity 5w30 and Toyota 0w20 as analogues of the factory oil.

Lubricant for the Mazda CX5 engine

Mazda CX5 manufacturers fill their engines with original lubricants with a viscosity of 5w30. The lubricant change interval is 15,000 km. Periodically, it is recommended to carry out maintenance in official dealer services. The first MOT must be completed after 8000 km.

Volumes for filling engine oil:

  • 2.0 Skyactiv-G - 4.2 L;
  • 2.5 - 4.5 liters;
  • 2.2 Sky Diesel - 5.1 L

For filling, you can use Mazda's branded liquid 0w20. If necessary, the following analogs are suitable:

  • Pennzoil Ultra 5w30;
  • Toyota SN 5w30;
  • Zepro Eco medalist 0w20 SN GF5.

It is also worth noting that synthetics with a viscosity of 0w20 are used for the first filling of the Mazda CX5, since these models of Japanese cars have a new generation of internal combustion engines, which are characterized by environmental friendliness and specific power.

Lubrication for Mazda CX7

The car manufacturer Mazda CX7 uses Dexelia Ultra 5w30 proprietary grease for the powertrain. However, according to the reviews of the owners of the CX7 car, regardless of the engines, it is best to fill in the Motul 8100 Eco-Energy 5w-30.

In terms of volume, 6 liters of grease must be poured into the Mazda CX7 engine. In this case, do not forget about replacing the oil filter. Replacement is usually carried out after 8,000-10,000 km, although according to the manufacturer's regulations, it can be done after reaching 15,000 km.

Oil for Mazda 323

  • Elf Evolution 900NF 5w40;
  • Dexelia 5w30;
  • Titan Super 5w40;
  • ZIC XQ 5w30;
  • ZIC A + 5w30 SN / CF.

What kind of oil to fill in the engine? is a fairly common question. Everyone knows about the importance of a timely oil change and, of course, everyone wants to pour the best oil into the engine of their car.

Alas, there is no definite answer to this question:
- You can find a huge number of discussions on "what kind of oil to fill in the engine"
- You can watch a bunch of videos with all kinds of engine oil tests
- You can reread a huge number of articles on the topic of engine oil

But nowhere you will get a definite answer which oil is the best. And let's say more, the more you delve into this topic, the more contradictions you will find and the more difficult the choice becomes.

What to do in such a situation?

First of all, refer to the manufacturer's recommendations. Open your vehicle manual and see what it says. And everything is simple there, or the owners of Mazda cars are relatively lucky, since Mazda does not offer many options for choosing an oil for its cars:

MAZDA ORIGINAL OIL ULTRA 5W-30
old hydrocracked oil, SM specification
- recommended for all Mazda gasoline engines, including SKYACTV

MAZDA ORIGINAL OIL SUPRA 0W-20
latest SN specification oil
-recommended and developed specifically for SKYACTIV engines

But this does not mean at all that you need to strictly use only original Mazda oil. Moreover, Mazda itself does not produce and has never produced automobile oils. It is also a well-known fact that the original Mazda oil makes Total- for the European market and IDEMITSU for the American market.

You can choose oil for your car from any manufacturer, here the main thing is to adhere to the specification recommended by the manufacturer
- for SKYACTV engines - we recommend using oil with a viscosity of 0W20 according to SN specification
- for all other engines, except for SKYACTV, 5w30 oils according to the SM or SN specification are excellent
- for our customers, we always keep available oils of the required viscosity and specifications of the following brands: MAZDA ORIGINAL,Total,IDEMITSU, MOTUL

Another important point! - beware of counterfeits !!!

Recently, a lot of fake car oils have appeared on our market. So beware of buying car oil from unverified locations and at temptingly cheap prices.
Unfortunately, we cannot give clear recommendations on how to distinguish fake oil from real one. The fact is that the degree of protection of the original oil is not too high. Or it is not difficult to counterfeit the packaging with high quality. And you will not be able to determine what is poured inside the canister.

For our part, we GUARANTEE that all oils offered by our car service are purchased from official distributors and are not fake.

This work is routine, i.e. - regular operation. Tightening is strictly prohibited. An oil change in the Mazda Familia engine must be done every 8-10 thousand km. mileage. Express replacement is done only if it is not possible to make a full one.

In order to effectively protect the motor, which is constantly exposed to overload, it is necessary to fill only those fluids that meet the specification. You can't just take and add anything there if you don't know what was filled. In this case, it is necessary to replace it with flushing.

Cost:

Car services in St. Petersburg:

The price includes filter replacement.

In terms of time, the work takes from 30 minutes to one hour.

When to do:
- every 8-10 thousand km. mileage;
- after the repair of the internal combustion engine;
- after replacing the timing belt (recommendation);
- after buying a car, even if the owner said that he changed the oil;

Warranty for work- 180 days.

What to upload:
1. Original
2. Castrol (Germany)
3. Mobil (Finland)
4. Shell (UK)
5. Elf (France)

When buying spare parts from us, we will provide a discount.

Read also