The new generation of the super popular Toyota car made its debut in 2011. The eighth international generation Camry outwardly radically differed from the previous one while maintaining the same dimensions. The novelty received an enlarged interior and a large windshield, which significantly increased the visibility while driving. Serial production of the XV50 continued until 2014, after which the car was restyled.

If earlier official deliveries to the Russian Federation did not provide for a wide variety of configurations, then with the new generation everything has changed and the versions of Lux, Prestige, Elegance, Classic and Standard were now presented to the buyer's choice. At the same time, even the most "modest" Standard had a full set of options, sufficient for the absolute comfort of the driver and passengers.

As for the line of engines, three types of power plants settled under the hood of the 50th Camry: 2.0 liters in the Classic and Standard trim levels with 145 hp, 2.5 liters for the Comfort version and above (180 and 200 hp), and also 3.5 liters for the most expensive configurations (249 hp). Russian imports provided for a 249-horsepower version of the 3.5-liter engine, although in Europe the same engine had 272 horsepower. The unit was derated so that the model could compete with the leaders of the Russian market by transferring the car to a lower taxation category. The average mixed fuel consumption at the above installations was 7.8 (engine 2.0), 9.8 (engine 2.5) and 10.6 (engine 3.5) liters per 100 km. Information on the types of oil to be filled and its consumption is indicated below.

Despite its merits, the Camry 50 also had one impressive, but "strange" minus: the model occupies a leading position in the list of the most stolen cars. This fact is explained by the ideal balance between price and quality and, perhaps, too rich filling.

Generation XV50 (2011 - 2014)

Toyota 1AZ-FE / FSE 2.0 liter engine. 145 h.p.

• Oil types (viscosity): 0W-20, 5W-20
• How many liters of oil in the engine (total volume): 4.2 liters.

Toyota 2AR-FE / FSE / FXE 2.5 liter engine. 180 and 200 hp

• What kind of engine oil is filled from the factory (original): Synthetics 0W20
• Oil types (viscosity): 0W-20, 0W-30, 0W-40, 5W-20, 5W-30, 5W-40
• How many liters of oil in the engine (total volume): 4.4 liters.
• Oil consumption per 1000 km: up to 1000 ml.
• When to change the oil: 7000-10000

Toyota 2GR-FE / FSE / FXE / FZE 3.5 liter engine. 272 h.p.

• What kind of engine oil is filled from the factory (original): Synthetics 5W30
• Oil types (viscosity): 5W30
• How many liters of oil in the engine (total volume): 6.1 liters.
• Oil consumption per 1000 km: up to 1000 ml.
• When to change the oil: 5000-10000

Car manufacturers pay great attention to consumables, in the operating instructions they indicate all the necessary lubrication parameters. Car enthusiasts, when choosing oils for the summer or winter, must take into account the requirements of the car manufacturers, otherwise the engine can quickly fail. We suggest you familiarize yourself with the parameters of the recommended engine oil for Toyota Camry.

1994 model

The automaker Toyota Camry insists on the use of universal lubricants of the SG or SG / CD class according to the API system. To select the viscosity, use Scheme 1.

Scheme 1. Predicted temperature range overboard the car until the next oil change.

In accordance with Scheme 1, with a thermometer reading above -23.5 0 It is recommended to fill with fluids 10w-30, 10w-40, 10w-50. If the thermometer is above -12.5 0 C, then it is worth pouring 20w-40, 1-20w-50. At temperatures below +10 0 C you need to use 5w-30 fluids.

Refueling capacities, taking into account the oil filter, are:

• 3.8 L for 5S-FE car engines;
• 4.5 l if the motor is 3VZ-FE;
• 5.0L corresponds to 1MZ-FE car engines.

Toyota Camry XV20 1996-2001 years of release

1998 model

• for 1MZ-FE motors, SH class grease according to API standards;
• for 5S-FE car engines, motor fluids of the SG group and above, in the absence of woven auto oil, it is permissible to pour class SF.

Scheme 2 is used to select the viscosity parameters of the lubricant.

Scheme 2 Predicted temperature range overboard the car until the next oil change.

In accordance with diagram 2 at a temperature range above -18 0 Use 15w-40 or 1-20w-50 greases. If the thermometer reading is below +10 0 C, 5w-30 motor oils are used.

Refueling tanks:

1. Car engines 1MZ-FE:

• 5.5 L dry engine;
• 7 l with oil filter change.

1. 5S-FE motors:

• 4.3 L dry engine;
• 3.6 l with oil filter change.

Toyota Camry XV30 2001-2006 years of release

2005 model year

1. According to the API system, SJ or SL groups, with a viscosity of 20w-50 or 15w-40, are used at air temperatures above -12.5 0 С (see diagram 3).
2. In accordance with the API classification, SJ or SL classes with the designation "Energy Conserving" or universal motor oils certified by ILSAC. The applied viscosity of such greases is 10w-30 at a temperature indicator above -18 0 С, or 5w-30, if the air temperature is below +10 0 С. When choosing a viscosity indicator, take into account Scheme 3.

Scheme 3. Estimated temperature range before the next oil change.

The amount of grease that will be needed for a subsequent replacement is:

• 3.8 liters with an oil filter or 3.6 liters without an oil filter for 1AZ-FE engines;
• 4.3 l including filter or 4.1 l without oil filter if 2AZ-FE engines;
• 4.7 liters with an oil filter or 4.5 liters without an oil filter in the case of 1MZ-FE engines.

The approximate amount of lubricant that must be added so that the lubricant level is between the lower and upper levels on the Toyota Camry dipstick is:

• 1.0 l for 1AZ-FE engines;
• 1.5 liters in the case of 2AZ-FE and 1MZ-FE power units.

Toyota Camry XV40 2006-2011 years of release

2008 year of release

1. All-season motor fluids with the designation "Toyota Genuine Motor Oil" or similar motor oils in terms of parameters, with appropriate markings or tolerances on the canister.
2. According to API standards, the permissible grease classes are SL or SM. Viscosity parameter according to the SAE 20w-50 or 15w-40 system with a temperature indicator above -12.5 0 С (the temperature is selected according to scheme 4).
3. In accordance with the API classification, the types of SL or SM motor oils bearing the designation "Energy Conserving" or all-season lubricants according to ILSAC. The viscosity is selected 10w-30 with a thermometer reading above -18 0 С, or 5w-30 if the air temperature is below +10 0 С (temperature readings are taken from diagram 4).

Scheme 4. Dependence of the viscosity index of engine oil on the temperature of the region in which the car will be operated.

Refueling tanks for Toyota Camry:

1. 2AZ-FE engine:

• 4.3 l with oil filter;
• 4.1 liters excluding the oil filter.

1. Car engine 2GR-FE:

• 6.1 L with oil filter;
• 5.7 l without oil filter.

Toyota Camry XV50 from 2011 release

2013 model

According to the operating instructions, lubricant for Toyota Camry engines is an original Toyota car oil or lubricants from other companies that have the parameters required by the car manufacturer. The class, type and viscosity of the oil are determined by the engine type.

Powertrains 6AR-FSE and 2AR-FE

According to the manual, it is necessary to fill in oils with a viscosity index of 0w-20, 5w-20, 5w-30 or 10w-30, corresponding to classes SL or SM with the designation "Energy Conserving" (energy saving) according to the API system. ILSAC certified multipurpose lubricants with a viscosity rating of 15w-40 are acceptable. You can also use motor oils of the SL, SN or SM groups according to the API system.

To select the viscosity depending on the temperature outside the machine, use diagram 5.

Scheme 5. Influence of air temperature on the selection of the viscosity of the motor oil.

According to scheme 5, at extremely low temperatures, it is necessary to fill in lubricants 0w-20, 5w-20, 5w-30. Car oils with a viscosity parameter of 10w-30 or 15w-40 should be used if the thermometer reading is above -18 0 Otherwise, starting the motor will be difficult.

The volume of engine oil required when changing is 4.4 liters including the oil filter and 4.0 liters without changing the oil filter.

Car engines 2GR-FE

• SL or SM labeled "Energy Conserving";
• SN marked "Resource-Conserving".

You can also pour in ILSAC certified greases with a viscosity rating of 15w-40 or use the oil groups SL, SM and SN with the recommended viscosity rating.

The viscosity parameter can be selected according to Scheme 6.

Scheme 6. Predicted temperature range until the next change of motor fluid.

According to scheme 6, at extremely low temperatures, it is necessary to use 5w-30 lubricants, and with a thermometer reading above -18 0 С, pour 10w-30 or 15w-40.

The volume of engine fluid required when replacing is 6.1 liters with an oil filter change and 5.7 liters without an oil filter.

Conclusion

Using the recommended engine oil for Toyota Camry can increase the life of the engine and lubrication system. The fact is that the lubricant creates a protective film on the surface of the internal elements of the car engine, the properties of which depend on the quality parameters of the lubricant. The thicker the car oil, the thicker the protective film will be, such oils should be used for the summer, thinner lubricants are used in winter, they provide a cold start of the engine. When using inappropriate oil in terms of parameters, the film may break, the engine will start to run "dry" - this will lead to its breakdown.

When changing the lubricant, note:

• the manual indicates the reference volume of oil that will be needed when changing the lubricant, in real conditions it may differ slightly;
• overflow of motor oil above the maximum mark on the dipstick is unacceptable, therefore, after adding grease, it is necessary to check the level of the lubricant.

Watch a video on how to change the oil in a Toyota Camry with your own hands:

Recommended engine oil for Toyota Avensis

3 4 5 Best price offer

Consumables like engine oil have a huge impact on engine life. If you pour anything into the car, but as cheaply as possible, then very soon you will see a response - the oil channels will lose their patency (they will simply be tightened with thick resinous mastic formed from the burnout of low-quality oil) and the engine will start to wear out. The first to feel the oil starvation is the camshaft, but if it can withstand, very soon all the friction pairs in the engine will reach critical wear, which means only a complete overhaul or, for the lucky ones, replacement of the engine due to the impossibility of its restoration. Comparing the cost of repairs and the best engine oil that you can buy, you will immediately get an answer whether it makes sense to fill the engine with fluids of dubious quality and origin.

The car manufacturer usually indicates what kind of oil is needed for your particular car engine. In this case, you should always take into account the conditions in which you operate your car. For example, for the 2010 Toyota Camry it is recommended to fill in SAE 0W-20, but if you are in more southern latitudes, where the temperature is constantly above 30 degrees in summer, oil with such parameters will be too liquid, which in itself can harm the engine. In such conditions, you should fill in a more average version - 10W-30.

In addition to viscosity, the qualitative composition of the oil has a great influence on the operation of the engine. According to the existing API grading, engine oils are of the following classes:

• SL is an environmentally friendly and energy-saving lubricant for modern engines, including turbocharged ones, using lean fuel mixtures;
• SM - practically does not change characteristics with decreasing temperature, protects against the influence of friction and oxidation of the friction pair;
• SN - energy-saving, low content of phosphorus-containing components;
• SH - for cars, the year of production of which starts from 1994. Prevents the formation of corrosion, carbon deposits, and oxidation, and also protects against wear;
• SG - The additives in this oil resist corrosion. Not recommended for vehicles manufactured earlier than 1989;
• SG / CD - suitable for gasoline and diesel engines operating under extreme operating conditions. Oils of this type have a high sulfur content.

Below we present to your attention a review and rating of the best engine oils that you can safely fill in your Toyota Camry. When choosing, we took into account the manufacturer's requirements, the recommendations of engine specialists, the characteristics of the oils, and, of course, the extensive experience of using lubricants of these brands by the owners of Toyota Camry cars.

The best synthetic oil for Toyota Camry

Synthetic oils are the most suitable for the lubrication of modern engines today. They are distinguished by high detergent properties, resistance to polymerization (the appearance of a varnish-like film) and retain their lubricating properties at high temperatures and pressures. Below you will find the best oils of this type that can be safely poured into the Toyota Camry engine.

5 ZIC X7 5W-40

Best price
Country: South Korea
Average price: 1130 rubles.
Rating (2019): 4.6

High quality engine oil ZIC X7 5W-40, based on the company's own development in the form of YUBASE synthetics, will be the best protection option for most modern engines, including the Toyota Camry. The best performance ZIC X7 5W-40 grease provides a high-performance additive package, including temperature stabilizers. They give the oil increased resistance to burnout, as a result of which the grease demonstrates optimal functionality even at minimum temperatures (down to -30 ° C).

A distinctive feature of ZIC X7 5W-40 engine oil is the ability to maintain the thinnest protective film on the surface of parts even when the car engine is not running, due to which all important components receive timely lubrication. This oil provides the engine with better care and prolongs its service life regardless of climatic conditions, driving style, road surface conditions, etc. The car engine will always remain perfectly clean due to the excellent dispersing properties of this grease. Among other things, pouring ZIC X7 5W-40 oil into the Toyota Camry reduces emissions of harmful substances into the atmosphere. The high environmental friendliness of the lubricant is ensured by the compliance of the additive components with Low SAPS.

4 Motul 8100 X-cess 5W-40

Most economical. The best choice for cars with high mileage
Country: France
Average price: 3745 rubles.
Rating (2019): 4.6

Innovative technologies have enabled Motul to provide the 8100 X-cess 5W-40 Multipurpose Engine Oil with superior performance that ensures optimum performance in engine protection. At the same time, this grease is distinguished by the most environmentally friendly composition and contributes to a significant reduction in fuel consumption, which, in turn, also has a beneficial effect on the environment. However, the domestic car owner cares about these parameters much less than the unacceptably high consumption of engine oil, which sooner or later appears in any used engine.

Becoming a regular fill in Toyota Camry 8100 X-cess, some owners, judging by the reviews, managed to reduce the "appetite" of the engine. This allows us to cautiously talk about successful attempts to postpone the inevitable a little more - overhaul of the internal combustion engine. The complex of unique additives, which was approved for this oil, provide it with the best dispersion-detergent properties, and at the same time, the stability of the viscosity and strength indicators. Thanks to these features, engine parts receive their share of lubrication in a timely manner, thereby extending its resource and increasing operating efficiency.

3 IDEMITSU 0W-20 SN / GF-5

High frost resistance
Country: Japan
Average price: 1536 rub.
Rating (2019): 4.7

This is one of the few engine oils that the manufacturer recommends to fill in the latest generations of Toyota Camry. The high purity of the base base ensures shear and oxidation stability. Also, the oil demonstrates low volatility and strength of the oil film at high temperatures, and due to the optimal washing characteristics, the supply channels of the lubrication system are kept perfectly clean, which excludes oil starvation. Among the additive components, there is also organic molybdenum, which significantly slows down the wear processes in the engine.

The use of IDEMITSU 0W-20 in Toyota Camry engines leads to fuel savings, and if you believe the reviews of the owners, quite noticeable. In addition, the engine works effectively in various conditions - city traffic and intensive driving style do not have a particular effect on its wear. The grease works over a wide temperature range and is ideal for regions with harsh winters. The best flow characteristics ensure the pumpability of the oil in the system at temperatures close to -50 ° C.

2 TOYOTA SN 5W-30

Optimum quality. Manufacturer's choice
Country: USA
Average price: 2303 rubles.
Rating (2019): 4.7

This oil is produced specifically for Toyota vehicles. If you trust the manufacturer of your car, and the nature of the operation meets standard conditions, feel free to fill this engine oil into your engine. Lubricants are supplied in special tin cans, which practically exclude the possibility of counterfeiting (a whole production is required for their manufacture). In addition to its reliability, TOYOTA SN 5W-30 oil reduces emissions of harmful substances into the atmosphere, forms a film protection on rubbing surfaces, and, due to the presence of sealing impurities, increases engine compression and throttle response.

The oil manufacturer is the world's largest concern Exxon Mobil Corporation, which guarantees high quality and full compliance with the latest API and ACEA (European Association of Automobile Manufacturers) standards. The benefits of using this engine oil for a Toyota Camry engine are obvious and logical.

Quality standardsAPI and viscositiesSAE for Toyota Camry cars of different model years:

Year of issue	Gasoline engine type	API quality class	SAE viscosity grade (dependent on ambient temperature)
2011 - present			0w-20, 5w-20, 5w-30, 10w-30
			20w-50, 15w-40, 10w-30, 5w-30
			15w-40, 1-20w-50, 5w-30
		SG and above, SF
			10w-30, 10w-40, 10w-50, 20w-40, 1-20w-50, 5w-30

1 MOBIL 1 ESP Formula 5W-30

The best engine oil. High environmental friendliness
Country: USA
Average price: 2807 rubles.
Rating (2019): 4.9

Already in the name of this engine oil there is a hint of high lubrication characteristics that can perfectly cope with their task under extreme loads. Exxon Mobil engineers have implemented in this product state-of-the-art technologies previously available only to exclusive racing cars. If you constantly use this oil in a Toyota Camry, you will provide the engine with reliable lubrication under any engine load, extend the life of the catalytic converter (the oil has a high level of environmentally friendly "cleanliness") and feel a noticeable reduction in fuel consumption due to the high antifriction characteristics of the oil.

The detergent additives included in the composition, with each subsequent replacement, will consistently reduce the previously formed sludge deposits, raising the internal cleanliness of the engine to a level unattainable for other lubricants. The disadvantage of this oil is its immense popularity, which has caused a large number of counterfeits to appear on the market. Just keep this in mind and always buy MOBIL 1 ESP Formula from trusted sellers.

The best semi-synthetic oil for Toyota Camry

A mixture of mineral and synthetic oils, this type of lubricant can be used in any existing engine. Mineral base makes up from 50 to 70% of the lubricant, due to which the cost of this oil is significantly lower than the synthetic one. Below are the best oils in this category that can be used to lubricate the Toyota Camry engine.

5 Rosneft Magnum Maxtec 5W-30

Best price offer
Country Russia
Average price: 1000 rubles.
Rating (2019): 4.3

For a Toyota Camry engine that has traveled hundreds of thousands of kilometers, in order to maintain efficiency and improve its operation (as well as optimize costs), the Magnum Maxtec 5W-30 semi-synthetic motor lubricant will be the best choice. This oil is able to completely clean all the main components from carbon deposits and other slag deposits, thanks to which some owners are able to extend the service life of the power unit. The stability of the viscosity indicators in the temperature range from -25 to 40 ° C allows this lubricant to be used throughout the year, and even in severe frosts, starting the engine will not cause any particular difficulties.

The presented engine oil has better resistance to burnout, which is very important for Toyota Camry cars, the engine of which has a certain wear. The beginning "zhor" can be stopped by switching to the Magnum Maxtec 5W-30. Also, lubricant from Rosneft is able to protect the cylinder-piston section of the engine from excessive soot deposits, and thereby optimize the operation of the internal combustion engine. Before use, please note that, in accordance with the API classification, this engine oil is suitable for vehicles manufactured before 2006.

4 BP Visco 3000 10W-40

The optimal combination of price and quality
Country: UK
Average price: 1228 rub.
Rating (2019): 4.6

For Toyota Camry, the age of which allows filling semisynthetics into the engine, BP Visco 3000 engine oil will be the best alternative to original lubricants. True, one should be prepared for the fact that its effectiveness after one replacement is impossible to evaluate. This lubricating fluid works, as they say, "for a long time." By changing, over and over again, it gradually disperses the effects of driving on low-quality gasoline or extended intervals between replacements.

The exclusive Clean Guard technology developed by BP and used in Visco 3000 grease has been successfully tested by many owners of various cars, including Toyota Camry. The oil literally absorbs all the dirt it can find inside the engine. Over time (3-4 replacements, no more than 7000 km of run), the engine starts to work more harmoniously, quieter, and its throttle response increases. The only drawback of this product is that the motor lubricant is not designed for a sporty driving style and can be used in Toyota Camry only by those owners who prefer calm and measured driving.

3 TOTAL Quartz 7000 10W-40

Strong oil film. Excellent thermal stability
Country: France
Average price: 1170 rubles.
Rating (2019): 4.8

When choosing high-quality semi-synthetics for a used Toyota Camry, you should pay attention to TOTAL Quartz 7000 10W-40 engine oil, which meets the highest requirements of modern car manufacturers. Despite the fact that the product is declared as an all-weather product, it is not recommended for use in regions where temperatures can drop below -20 ° C, as its viscosity decreases under such conditions. In the range of permissible indicators, this oil demonstrates the best protective properties, even in relation to the most vulnerable areas of the engine. Strong, resistant to high pressure and temperatures, TOTAL Quartz 7000 oil film envelops all contacting elements, thereby increasing engine dynamics and reducing fuel consumption.

A positive feature of this engine oil can be considered a high resistance to changes in viscosity throughout the entire operating period, due to which the initial properties also remain unchanged. By filling this lubricant in Toyota Camry, you can be sure that the car engine will be protected from corrosion, oxidation and premature wear. The process of formation of carbon deposits will also be suspended, and the already existing "litter" in the engine is gradually dissolved by the oil, and as a result of the next replacement it is removed.

2 Castrol MAGNATEC 10W-40 R,

The most effective protection for friction pairs. High popularity
Country: England (produced in Belgium)
Average price: 1440 rubles.
Rating (2019): 4.7

Castrol Magnatec engine oil guarantees gentle cleaning of the interior of your engine. A special set of high-molecular additives Intelligent Molecules guarantees reliable lubrication of friction pairs - when the engine is turned off, the surface tension of the oil keeps it on the parts and does not allow it to completely drain into the sump. Thanks to this property, which is not found in most other engine oils, your Toyota Camry engine is provided with an easy start even in cold weather, which, of course, significantly increases its service life.

The properties possessed by this semi-synthetic grease help protect the engine from overheating and avoid the appearance of sludge deposits in the engine. The oil belongs to the class of energy-saving and has proven itself perfectly when working with various types of fuel. Due to its great popularity, there is a large presence of counterfeit products on the market, which requires the buyer to be more selective when looking for a seller.

Engine oil in a Toyota Camry car is an independent change.

To complete this procedure without visiting a car service, you just need to perform the following steps in the indicated order:

1. Remove the crankcase protection;
2. Unscrew the drain plug of the crankcase and oil filler neck. The engine must be at operating temperature. Pre-prepare a container where hot oil will be drained (the best option is an old oil canister with a cut out side hole);
3. Wait for all the oil to drain;
4. Replace the oil filter with a new one;
5. Screw the crankcase drain hole and replace the protection;
6. Fill with new oil (up to the level located on the dipstick midway between the MAX and MIN marks);
7. Start the engine. Check that the oil pressure has returned to normal (up to two minutes after starting the engine).

1 LIQUI MOLY Optimal 10W-40

Adapted to working conditions in Russia. excellent quality
Country: Germany
Average price: 1749 rub.
Rating (2019): 4.8

Synthesized according to modern hydrocracking technologies, this engine oil does not change its viscosity until the next timely replacement, guaranteeing reliable lubrication of rubbing parts of a high-speed engine, including a turbocharged one. There is a low percentage of waste and efficiency when working on different fuels (gasoline or gas), there are no conditions for the appearance of deposits on internal surfaces. The engine oil has detergent properties comparable to those of a synthetic oil.

The maintenance regulations for the new Toyota Camry recommend checking the level and quality of the oil in the box at least once every 2 years or after 40 thousand km. It is replaced with a fresh one in case of severe pollution, the appearance of a burning smell or a mileage of 160 thousand km. If you often drive at a speed of more than 80% of the maximum speed or with a full load, the quality and level of fluid in the automatic transmission must be controlled after 40 thousand km, and after 80 thousand km or 4 years of operation, the oil and filter of the Toyota Camry automatic transmission must be changed ...

Simultaneously with the replacement of the contents of the automatic transmission, a new filter is installed, since the old one can no longer fully fulfill its function and will only contaminate the inside of the box. To access the filter, the automatic transmission pan is removed.

How to change the oil correctly

There are 2 ways:

Complete oil change in automatic transmission Toyota Camry. A special device is used, which is connected to the gap between the box and the radiator for its cooling. Old oil is drained through one pipe, and the same amount of fresh oil is fed through the other. The process is considered complete when the color of the liquid at the inlet and outlet of the apparatus becomes the same.

Then a diagnostic scanner is connected, by which the temperature of the automatic transmission is monitored, and when it reaches 50 ° C, the required liquid level is set. This completes the replacement.

The disadvantage of this method is the high oil consumption (12-17 liters).

A partial oil change in a Toyota Camry automatic transmission (by replacement) is performed with the engine turned off by draining the contaminated oil and filling in an equal amount of clean oil. With this method, it is possible to renew from 35% to 50% of the total volume of the liquid in the box.

In this case, the consumption will be 3-4 liters.

We recommend using method # 1 (complete oil change in Toyota Camry automatic transmission), but at the request of the client, we can use method # 2. Failure to do this is guaranteed to lead to costly repairs to the Toyota Camry automatic transmission.

What oil to use

The Toyota Camry Driver's Manual states that an original Toyota Genuine ATF WS product must be used for automatic transmissions. The manufacturer does not allow the use of analogs.

Please note that there are several types of Toyota WS oil, which correspond to different engines and model years of the vehicle. For the new Camry, an oil is used that thickens less at low temperatures and does not lose its characteristics when heated to 130С. Its code is indicated on the packaging: 08886-80807 (1 liter can), 08886-02305 (4 liter canister) and 08886-80803 (20 liter barrel).

Is it possible to change the automatic transmission oil yourself

Toyota Camry automatic transmission is a complex and expensive mechanism. Therefore, its maintenance requires the use of special equipment. In this case, it is a lift, a diagnostic scanner and a replacement apparatus.

We do not advise you to replace the mals in the Toyota Camry 2.4, 3.5 (V40, V50) automatic transmission yourself. Deviations from the recommended amount of liquid poured in will cause jerks and jerking when driving, unclear gear shifting. And even short-term operation of the box "dry" will disable it.

Do not risk in vain, come to our network of Toyota car services for an oil change. We employ only professionals, and all workplaces are equipped with modern equipment, which is necessary for high-quality repair of Toyota Camry. We will select the necessary consumables for your machine and replace them in full accordance with the factory technology.

Watch an interesting video on this topic

The service life of the Toyota Camry 40 power plant directly depends on the quality of the oil to be filled in and the intervals for its change. Even the most gentle driving mode of the car will not relieve the engine from excessive wear if the rubbing surfaces work without sufficient lubrication.

Therefore, during the operation of the machine, it is important to monitor the oil level, observe the change intervals and use only well-proven products for filling.

Toyota branded oil overview

Toyota Motor Corporation produces a line of engine oils for its vehicles. They differ in price, viscosity, base, amount of additives and their properties.

One of the most suitable for Camry 40 is Toyota's synthetic oil 08880-10705. This grease is used all-season. It has good antioxidant and detergent properties. The oil proved to be excellent in operation at low temperatures. It perfectly performs the functions assigned to it, regardless of external factors. This oil is most suitable for a Camry with a 3.5-liter engine.

Car enthusiasts who are engaged in boosting their cars also speak admirably about Toyota 08880-10705. It perfectly lubricates friction surfaces in engines under excessive stress.

Semi-synthetic oil from Toyota Motor Corporation has a lower cost, but is not particularly inferior in its characteristics to a synthetic-based lubricant. It is also all-season. Car owners note that the use of Toyota08880-10605 oil is most optimal in 2.4 liter engines.

Oil with a low viscosity is more suitable for cars with low mileage. Car owners point out that on the Camry 40, whose odometer shows more than 150 thousand kilometers, Toyota Bay 08880-10505 leads to a large oil pan. In general, the oil is good and fully fulfills the functions assigned to it.

In the case of engines with solid mileage, it is recommended to use mineral oil. Toyota 08880-10805 shows itself well only on engines, which are subject to overhaul in the near future. Otherwise, car owners do not recommend using it, since:

• oil consumption increases;
• the engine starts more difficult, especially in the cold season;
• the relubrication interval needs to be halved.

Synthetic oil Toyota "Engine Oil 5W-40" is focused on use in Europeans. His gulf in American and Arab women will not end badly, but the expense can be significant.

Toyota "Engine Oil 5W-40"

Toyota's "Engine Oil" synthetic oil, pictured below, has been developed in contrast to the previous oil primarily for vehicles manufactured by Toyota Motor Corporation. It has fewer certificates, therefore the price is not lower. The operational properties of Toyota "Engine Oil" are at a fairly high level

Toyota "Engine Oil"

The price for original Toyota Motor Corporation oil starts from 1600 rubles for 5 liters of mineral water, from 1800 for 5 liters of semi-synthetics and from 2500 rubles for a similar canister of synthetics.

Oil for the Camry 40 engine from other manufacturers

Reviews of Toyota Motor Corporation branded oil are quite controversial. Some car owners use only the recommended oil, but there are drivers who believe that there is better lubricant. Toyota does not prohibit the use of third party fluids.

According to the reviews of motorists, a table of the best analogues of the native oil has been compiled. The selection of grease takes into account not only manufacturers, but also the year of manufacture, as well as other operational parameters.

The cost of oil from the above companies ranges from 1000 to 3000 rubles for a five-liter canister.

Oil change schedule

• for the mineral - every 5 thousand kilometers;
• for semi-synthetics and synthetics - 10 thousand km.

If in two years the car has not covered this distance, it is necessary to change the lubricant regardless of the mileage.

According to the recommendations of car owners, oil changes should be halved. This is especially true for cars that are often in city traffic jams or off-road. A sporty driving style also requires more frequent maintenance.

In some cases, for example, after overheating or water ingress into the lubricant, the oil must be changed ahead of time. To diagnose the condition of the lubricant, it is recommended to drop the oil onto a napkin. By the shape of the blurred spot, you can determine its condition.

Determination of the condition of the oil by a stain on a napkin

There are four control zones to consider when diagnosing oil condition, as shown in the image below.

The filling volumes of the Toyota Camry 40 are shown in the table below.

The manufacturer allows oil consumption up to 1 liter per 1000 kilometers. Most car owners do not think that this tolerance is too high and the engine should be repaired if a 2.4-liter engine eats more than 200 grams of oil per 100 km, and a 3.5-liter unit is more than 350 grams at a similar distance.

The process of changing the oil on a Camry 40 do it yourself

The engine oil is changed according to the instructions below:

1. Remove crankcase cover.
2. Unscrew the drain plug. Old grease poured into the internal combustion engine will pour from the hole.
3. Wait for the oil to drain.
4. Replace filter.
5. Screw on the drain plug.
6. Fill engine with fresh oil.
7. Start the engine. A signal that the oil pressure should not be below normal after a couple of minutes of operation of the power unit.
8. Check its level. The oil should fit within the tolerances between the upper and lower marks on the dipstick.