Many Ford Fusion owners have encountered a hum in the power steering. Usually the malfunction lies in the power steering pump. We will try to figure out how to replace this element without resorting to the help of a car service.
Video
The video will tell you how to quickly and efficiently change the power steering pump with your own hands, as well as about the intricacies and nuances of the process
Replacement process
Before proceeding with the replacement process itself, it is worth considering the causes and symptoms of a part malfunction. If there is a knock and creak in the area of the power steering pump, it means that the shaft has deformation, and also an indirect sign is the wear of the belt court on one side.
The replacement process is quite simple. So let's get started:
- We remove the negative terminal of the battery.
- Unscrew and remove the front right wheel.
- We dismantle the drive pump. It is usually recommended to replace the belt with the belt as it often has to be cut.
- Dismantle the power steering injection hose.
- Disconnect the suction hose from the pump connection.
- We unscrew the four bolts securing the power steering pump, and remove it from the car.
Installation of a new pump is carried out upside-down.
Part selection
The original catalog number of the Ford Fusion power steering pump is 1357617. The average cost is 40,000 rubles.
Analogs
In addition to the original part, there are a number of analogues that can be used and they are in no way inferior in quality. So, consider a list of similar spare parts for Ford Fusion: 
Conclusion
Replacing the Ford Fusion power steering pump is not difficult, but it will take effort, since you also have to change the belt. Particular attention should be paid to the choice of a product, since fakes are often found on the auto parts market.
Every modern car is equipped with hydro- (power steering) or electric power steering (EUR). This made it easier to drive and even allowed ladies to drive large cars, which is called "one-handed". In turn, power steering imposes certain obligations on their owners, namely, the need to regularly monitor the state of the power steering fluid, as well as to make its timely replacement after the car has traveled a certain distance. Why I did not mention the power steering, because, unlike power steering, they are practically do not need maintenance, the effort is produced by a small motor that operates from the mains and does its job properly, regardless of the mileage of the car. I will not go into details and talk about which is better or worse, instead, I propose to talk about the more important thing - about how to replace fluid in power steering with Ford Fusion at home.
7. After you disconnect the fitting, it will pour from both hoses. old power steering fluid... Install the container and drain the waste.
8. After you need something, carefully plug the hole of the hose that goes to the tank, for this you can use a plug of a suitable diameter or a piece of some rag.
9. We act differently with the second end of the hose, it must be lowered into the container, since through it we will drain the remnants of the old power steering fluid.
10. Take a clean power steering fluid and fill up to the "MAX" mark.
11. We ask your partner to get behind the wheel and turn the wheel left and right. It is necessary to rotate the steering wheel smoothly and without jerking - all the way to the right, then all the way to the left. From such manipulations, the old oil will be squeezed out and drained into a prepared container, and the new oil that you have poured into the tank will replace the old one. Your task is to monitor what kind of oil flows out of the hose and ensure that there is always power steering fluid in the tank. Pour in fluid until a clean power steering fluid flows from the hose, that is, the one you pour.
12. When the old liquid is drained and clean liquid has flowed from the hose, connect the fitting with the hoses and attach it back to the casing.
Correspondence with an expert:
- Comments to the product "Power steering pump": Product: second-hand. Wear percentage: 0%
- Comments on the product "manual transmission (manual transmission)": Product: used
- Commentary on the product "Kp in a block with a driving axle (rebuilt)": new rebuilt
- Commentary on the product "F-Power steering pump with pulley O78mm 5PK, 90-100 B": I recommend
- Driver's door lock, maybe it's not the original?
- Unfortunately there are no annals
- Good afternoon! Seller selected Door lock LH lane Fu self-selected No. Amount and date FORD / 1372469 Original 2 840 р.
- what is the difference from the driver's door lock, the cost is 11780 rubles.
- the question is, what is the difference between this lock and art.1372469, the price is noticeably different, what is the catch?
- Hello, the proposed lock options are selected in the original catalog by the VIN number of your car.
- Perhaps such a difference in price will be depending on different complete sets of cars and, accordingly, different locks.
- Your variant With the central system. locking, With remote control unit opening doors
- Thanks for clarifying
- Please, I was glad to help.
- Commentary on the product "Fusion / Fiesta Power steering pump 1.4-1.6 with air conditioning (small pulley)": Reconditioned
- Comments to the product "Power steering pump Ford Fiesta 2001-2007, Ford Fusion 2002-, Mazda 2 2003-2007 rebuild": Rebuilt
- Comments on the product "FUSION AC power pump without pulley": without pulley
- Comments to the product "Power steering pump Ford Fusion Fiesta analog. With pulley P0705A": Analog
- Hello. Please check that the vin is correct.
- WF0UXXGAJU8A36204
- Thanks.
- Loyal now?
- Yes, it is now recognized.
- Do you have the original used?
- MSG and REIKANEN remanufactured.
- Ie. used, but sorted out with the use of new oil seals and worn parts.
- From showdown cars
- There is no such.
- Comment to the product "Power steering pump with pulley? 78mm 5PK, 90-100 Bar FORD Fiesta V, Fusion 1.3-1.6, 01-": belarus, I recommend
- Commentary on the product "FORDFIESTA2001-2007, FORD RESTORED PUMP GU FORDFIEST": russia
- Hello, and if the cable is correct to it at what price
- I need a Ford fusion
- Engine 1.4
- Hello! And what kind of cable, hood, etc. Please clarify
- I have a gur pump in my car and the cable is not original. When this hose burst, the oil leaked out, I ordered it, but it didn’t fit, we ordered that the pump is from another machine. I need everything in the kit and the pump and hose
- Of course, I don’t understand this, I just don’t even ask anyone
- So, as for the pump, I recommend Fenox, although it is made in Belarus, but the components and technologies are not ours, Applicability table - FORD model FUSION (JU_) station wagon 1.4 gasoline 80 hp 08.2002 - FXJA, FXJB, FXJC engine.
- Photo sent
- Now the hose, as I understand it, you need a high pressure hose. And you also talk about the cable all the time, did you mean the hose? I'll pick up the hoses, but a little later.
- Another question, how was it explained to you why you burst, old age, frayed ...
- Yes it was never changed burst
- That is, as they say * dried *. just old age. I understand, I'll pick up the hoses. I will definitely answer, but a little later
- Good
- I just can't see how much this pump costs from the photo
- Description in the list of parts selection there are 3 options
- In the photo, select the numbers of the hoses that you need, It will be easier this way
- Hello! it's all ?
- there are still analogs?
- yes that's all
- thanks!
- please
- Uploaded picture
- New picture
- Power steering pump assembled (with a pulley. 6 "streams") for vehicles with air conditioning, 1.4 volume, 80 hp.
- are you ready to pay 15,000 for a pulley?
- .... found a cheaper option ..
- your right
- art: 1357617, brand: FORD. Pick up spare parts for the client according to the standard procedure for processing a request and answer his question.
- Thanks a lot
- Does the analog have a pulley?
- good day, yes there is
- Andrey, good evening! I would like more information about the power steering hose, is it really a return line? The one that comes out of the steering rack
- Good evening. Yes, this is the return line.
- is the non-original much worse in quality? What do you advise?
- Hose and hose, I would take a non-original. What happened to the old one?
- crumbled at the entrance to the rail, the pump spun without liquid, it also whistled
- It's clear. In this case, only change.
- It is composite, tubes-hoses, but it is unlikely that there is a separate ending somewhere. By the way, pumps with or without pulleys? If not, then you can repress from the old one?
- Composite is a hose, not a pump)
- a pump without a pulley, from the old one must be taken.
- for the product REIKANEN - Power steering pump Ford Fusion, Fiesta V 01- 1.4 TDCi pulley 126mm origin.reb, a discount of 1,110.00 rubles is provided. New price RUB 9,990.00
- for the DP-GROUP product - Ford Fiesta, Fusion 1.4TDCI 03 pump - a discount of 1,158.00 rubles is provided. New price RUB10,422.00
- for the FORD product - Power steering pump Fu (diesel), a discount of 3,166.00 rubles is provided. New price RUB17,944.00
- 1 495 688 - number of the pump with a pulley. you cannot bring it through the wine code. the price for it starts from 18000
- I picked up the option offered by Ford itself in your position - it is called reconditioned without a pulley. in fact, this is a new working pump, just cheaper
- if the price is too high, look for a used car on a Ferio or Euro auto showdown
- for 8960 rubles without a pulley
- Power steering pump and belt
- do you need a pump with or without a pulley?
- With a pulley
- added without a pulley, with a pulley and the pulley itself
- added drive belt replacement kit, includes two belts and a tool to replace them
- devices
Almost every vehicle today is equipped with a hydraulic power steering system. With the help of the design, the steering wheel can be turned without much difficulty. In order for the mechanism to function properly, a special mixture is needed that lubricates the mechanical assemblies and rubber parts, protecting them from friction and overheating. Lack of oil leads to excessive wear on the equipment. To avoid costly repairs, drivers need to regularly monitor the amount of fluid in the power steering system and replace it in a timely manner. How to do it yourself, consider the example of replacing the power steering mixture in Ford Fusion cars.
Signs of the need to replace power steering fluid on Ford
Hydraulic fluid in Ford Fusion vehicles is a process oil that transfers resistance from the pump to the vehicle's hydraulic cylinder. The circulation of the substance occurs through the connecting nodes of the power steering system, as well as hoses. The required amount of mixture is indicated by special marks MIN and MAX. Lack of oil requires timely filling.
The power steering system itself is the main part of the steering. So the driver just needs to twist the wheels and set the vehicle to the required trajectory. If the power steering fails, it will be much more difficult to drive the car.
If the steering wheel stops turning when driving the vehicle, the fluid requires urgent replacement.
Signs of replacing the power steering mixture:
- When driving, the steering wheel is strongly held, and the driver feels jolts
- When turning the steering wheel, you must apply considerable effort;
- Wheels turn too easily;
- Constant loosening of the pulley;
- The steering wheel makes noise and vibrations;
- The steering wheel turns on its own;
- The driver has difficulty in parking.
The solution to these problems in most cases is the timely replacement of the hydraulic booster oil.
Choosing a steering fluid
Power steering fluid contains mineral and synthetic substances. The former are most commonly used for light vehicles such as Ford Fusion. Synthetic, in turn, are used for special equipment.
Mineral oil performs the main functions of power steering, protecting the mechanism from corrosion and excessive friction.
Manufacturers of the hydraulic mixture produce oil in three colors, depending on the type of vehicle, as well as the specifics of the power steering system device. It is not recommended to mix different liquids with each other, since the composition of the mixture may be incompatible, as a result of which this will lead to mechanical breakdown.
Oil colors:
- Red power steering fluid is intended for vehicles with automatic transmission. It is possible to mix such a mixture only with yellow;
- The yellow color of the oil is neutral and is most often purchased by drivers of all brands and types of vehicles;
- The color green is intended for use exclusively in vehicles with a manual transmission. This material does not interact with other oils.
Thus, it is necessary to purchase oil in accordance with the type of gearbox. The most preferred class is D III. Brands: Mobil 320 and LIQUI MOLY ATF 110.
To replace the hydrolytic fluid in a Ford Fusion car without first cleaning the system, no more than 1 liter is required. With washing - 2-3 liters of solution.
Step-by-step instructions for changing the fluid in the power steering
In the car, you can make a full or partial oil change. The choice depends on the initial state of the liquid in the expansion tank. If the oil has acquired a characteristic, specific smell and color, it is recommended to completely drain and then fill in a new one.
Procedure for replacing power steering fluid in Ford Fusion:
- Initially, you need to turn off the car engine and let it cool down;
- Open the hood and fix it;
- Unscrew the cover of the power steering expansion tank;
- Pump out all the liquid with a syringe and rubber tube;
- Determine through which hose the oil enters the power steering expansion tank - this is the return, and through which it leaves and goes to the power steering pump;
- Drain the remaining mixture in the system by disconnecting the hoses;
- Fill with new fluid up to the maximum mark (1 l).
After that, without starting the engine, you must turn the steering wheel several times until it stops. This will distribute the mixture evenly throughout the system. If necessary, you can then add oil.
