The topic of oil selection for Kia Rio is extensive. For the whole the lineup Korean auto very reliable engines are installed. However, if you do not carry out the required maintenance, without timely diagnosis, any, even the most reliable motor will start to let down.
Regular oil changes in Kia Rio are one of the important stages in car maintenance. This is especially true for those vehicles that have already been in operation for some time. The engine receives a serious load, and therefore, without proper care, it suffers from premature wear.
The oil change interval depends on the manufacturer's recommendations. To prevent wear and tear, the manufacturer recommends replacing the product at least every 10,000 km. At the same time, about three liters of liquid are poured into the engine. The obvious fact is that the oil must be changed in a timely and regular manner. Main indicator in order to decide whether an oil change is needed, it is its viscosity or degree of fluidity.
Along with the oil service centers Always . If you decide to do the replacement procedure yourself, consider some of the different model years.
For example, for cars of 2015, 2012, 2013, 2014, you can choose several suitable options:
- Shell Helix Ultra;
- Total Quartz;
- Divinol;
- ZIC XQ LS.
The cost-benefit analysis shows that the best option from those presented Shell Helix Ultra . The branded product includes the entire set of additives and minerals. Using it for the Korean Rio is fully justified. Shell does not lose its positive qualities with prolonged active use, which is also a definite plus for the oil of this company.
Total Quartz can boast of impressive characteristics. This oil is also able to keep all parts of the engine in working condition. The price of a branded product is also not high. The original characteristics of the additives and minerals that make up the oil retain their qualities even with active long-term operation car.
Firm oil Divinol different from previous small expense. Despite the fact that the brand has not received wide advertising in the media, it is actively bought knowledgeable motorists. The option is quite suitable for KIA, as it copes with all engine protection functions.
Oil ZIC is another product sold by affordable price. An impressive list of additives included in its composition, perhaps, will alert anyone. However, they directly affect the protection of the motor from premature wear. It can be safely poured into the Rio engine.
If we consider the choice of oil in terms of choosing a brand, then this activity is practically useless. Every car owner has their own preferences. It is unlikely that someone will want to change the brand, only after reading one article. Moreover, the Rio manufacturer does not recommend changing the brand of oil. If you purchased one specific product to replace, then it is better to use it in the future. Or use the services of the same auto repair shop.
If you carefully study specifications in KIA, the following important information can be highlighted:
- recommended by the manufacturer engine oil— Shell HELIX;
- filling volume 3.3-3.49 liters;
- API Servise classification - 4 or higher;
- temperature range for recommended viscosity values from -30С (5W20) to +50 (20W50)
At the same time, the memo for the driver says that before pouring oil, you need to make sure that the surface near the cover is clean. filler neck, as well as the filler hole. The oil dipstick must also be clean. These indicators are especially important if the vehicle is operated in dusty, polluted conditions. For example, when driving on suburban dirt roads. Timely cleaning of these parts (dipstick and covers) will keep the engine from dust and sand.
Engines KIA Rio later releases are made with no gaps between the rubbing parts. Oil with a lower viscosity penetrates into the gaps better, lubricating the parts better. Oil with a viscosity of 5W-40 almost does not drain into narrow gaps, leaving them without lubrication. Improperly filled oil causes early engine wear. That is why it is important to follow all the manufacturer's recommendations when changing the oil. This requirement is valid for both petrol and diesel engines.
It is more important to choose the right oil for a KIA engine not by brand name, but by class. API quality, IlSAC. It is important to consider that for each generation of KIA, the manufacturer recommends different oil. How more modern engine the higher the quality the product should be. API SL and ILSAC GF-3, for example, are only recommended for KIA first generations. Higher quality oils - API SM / SN and ILSAC GF-4 / GF-5 are quite suitable for cars manufactured in 2000-2005.
Rio 2005-2009 requires API SM and ILSAC GF-4 oils. As in the previous case, higher quality oil, for example, API SN and ILSAC GF-5 is a good option. More Low quality oil cannot be used. In KIA Rio 2015, it is recommended to use API SN and ILSAC GF-5 quality oil. When it comes to KIA Rio with diesel engine, according to the manufacturer's recommendation, API CH-4 quality oil, but lower, should be used. A higher quality product is quite suitable, for example, Hyundai oil Premium LS Diesel 5 W30.
So, in the question of choosing oil for Rio, one rhetorical question remains: synthetics or semi-synthetics? It is impossible to say that one type of oil is worse and the other is better. As we have discussed above, there is suitable oils for the engine, but there are unsuitable ones, among those and others there are high-quality ones, but there are poor-quality ones.
According to most of the inhabitants, it is better to choose synthetic oils For Rio engines. Such oils do not lose their properties during long-term active operation of the car. However, synthetic oils are more expensive than semi-synthetics.
Information for those who care about savings: there is another little-known type of oils - hydrocracked ones. These oils are produced from the hydrosynthesis of oil. This type of processing is low in cost, and therefore the final product is much cheaper than other types of oils. True, such oils lose their qualities faster than synthetic ones. The oil is suitable where the car engine is not subject to serious wear. That is, for owners who use their KIA infrequently.
Good day everyone! Continuing the theme of choice oils for kia rio. The topic is quite extensive and there is still a lot of work ahead. Therefore, get ready, as there will be at least a couple or three articles on this particular car model ahead. Today we will talk about engine oil for Kia Rio. We have already talked about, but today we will repeat this topic again. Also do not forget to read articles about and her.
Engine oil for Kia Rio (Kia Rio) - choice by SAE viscosity
Before buying oil for kia rio, you need to at least take a look at the instructions for the car. After all, how are we? We go to the store, see expensive oil, buy it and think that's it, the engine is reliably protected. But it is not always the case. Usually the manufacturer himself recommends which oil to use in the engine. If we again turn to the instructions, we can understand that the manufacturer recommends oil with a viscosity of 5W20 or 5W30 for the Kia Rio. At the same time, 5W20 is the preferred option. And 5W30 is recommended to be used if 5W20 viscosity oil is not on sale. But in hot countries it is better not to use a viscosity of 5W20, but to use, for example, oil with a viscosity of 5W30. The manufacturer also warns about this. Here is a page from the manual car Kia Rio:
Why is that? Yes, everything is simple. The engines of modern cars are made with minimal clearances between the rubbing pairs. If earlier it was possible to fill almost any engine with oil with a viscosity of 5W40 and drive safely, then modern cars this will no longer be forgiven. Oil with such a viscosity almost does not penetrate into the gaps, leaving them on the verge of "oil starvation". As a result of what happens increased wear engine parts. And from here increased consumption oil and early engine failure. That is why it is recommended to use oil with the recommended viscosity. In our case, the oil for Kia Rio should correspond to a viscosity of 5W20 or 5W30. This requirement applies to both petrol Kia engines Rio, and for diesel. This viscosity must be applied year-round, regardless of weather conditions. We figured out the viscosity. Now let's talk about the quality of the oil.
The choice of oil for Kia Rio according to API and ILSAC quality classes
In one of the articles we said that there are three Generation Kia Rio. Every generation goes certain oil. The more modern the generation, the higher the quality of the oil the manufacturer recommends to use in the engine. For gasoline engines of the first generation Kia Rio, it is recommended to use quality class oil according to API SL and ILSAC GF-3. These are quite old requirements. Almost all oils in auto shops meet these standards. It is not necessary to look for these particular standards. Oils of higher quality are quite suitable here, for example, API SM / SN and ILSAC GF-4 / GF-5.
Second generation requires use in engine API oil SM and ILSAC GF-4. As in the first case, it can be better (API SN and ILSAC GF-5), it can't be worse.
The latest generation of KIA Rio requires even more quality oil, namely oils latest generation API SN and ILSAC GF-5.
Concerning oils for kia rio With diesel engine, then the manufacturer recommends using oil with API CH-4 quality class and higher, for example
Engine oil for Kia Rio (KIA Rio) - which is better synthetic or semi-synthetic?
Which oil is best for Kia Rio- this is probably a rhetorical question, since it cannot be said that one oil is better and the other is worse. There are oils suitable for a particular motor, but there are not suitable ones. Some of them are of good quality and some of them are not so good. Of course, synthetic oils are better than semi-synthetic ones, as they are much better. Plus, synthetic oils do not lose their properties much longer. But you have to pay for quality. 100% synthetics are 2 times more expensive than conventional semi-synthetics. In addition, there are also hydrocracking oils. These are oils obtained by the hydrosynthesis of petroleum. By reducing the cost of processing, the final oil is cheaper and practically does not concede to it in terms of its properties. But hydrocracking oils lose their qualities faster than synthetics.
Therefore, when choosing oils for kia rio it is important to choose not the most expensive, but suitable according to the manufacturer's recommendations. And also do not forget to make a replacement in a timely manner.
Oil for Kia Rio 2012, 2013, 2014, 2015
The last third generation of KIA Rio began its existence in 2011. The range of engines includes both petrol and diesel engines. Oil for Kia Rio 2014 with gasoline engine must comply with quality class SN/GF-5. IN this case Great suitable motor Liqui oil Moly Special Tec AA 5W20. This is a good hydrocracking synthetic with an average price tag. The Special Tec AA line also has a similar oil, but with a viscosity of 5W30. Photos of oils below.
If you decide to buy Liqui Moly, then read the article first: "". I think this will help not to run into a fake.
The second option is the original Hyundai / KIA Turbo Syn 5W30 oil. This korean oil for Kia Rio, which is manufactured by Mobis. Pretty good option. But for the brand will have to pay a little extra.
What kind of oil to fill in KIA Rio, taking into account the fact that the motor oil market in Russia is extremely saturated and can offer even the most demanding motorist wide choose from domestic and world brands is a difficult question. The cost, as well as the quality of the oil products themselves, can be completely different and depend only on the needs and thickness of the domestic buyer's wallet. However, a wide range similar product almost always means the agony of choice and the difficult path to the checkout of the store.
Viscosity is the main indicator
About the fact that the oil in the engine " iron horse”needs to be changed periodically, any driver knows. Some car owners believe that oil changes for cars operating in Russia must be seasonal - twice a year. This point of view is, in principle, correct and does not conflict with the main requirement technical regulations for car maintenance - a mandatory oil change after a certain mileage. It is not forbidden to change it more often, but a more rare performance of such an operation can lead to trouble with the engine of your favorite car.
It should be noted that for all KIA modifications Rio releases from 2011 to 2015 inclusive, fairly reliable engines are installed that meet all modern requirements. At the same time, when deciding what kind of oil to fill in this car, it is necessary, first of all, to be guided by such important characteristic like its viscosity.
Viscosity - main characteristic In fact, the viscosity of the engine oil determines the amount of its fluidity, and the right choice will help save engine parts and components from wear earlier. due date.
Engine oil with a similar viscosity will reliably protect a car engine under severe loads without compromising its main characteristics and significantly extend its service life.
Criterias of choice
Majority KIA owners Rio prefers to use engine oil foreign manufacturers. Such a choice is associated with the obligatory compliance of the imported product with high international standards, unsurpassed quality and recommendations of world automakers.
However, it should be noted that the high retail price of imported oil in no way excludes the purchase of counterfeit petroleum products in original packaging. Unfortunately, in Russia counterfeit motor oil is worldwide well-known manufacturers It has always happened and this year is no exception. Therefore, it is advisable to avoid spontaneous purchases in dubious places from unknown sellers.
Interestingly, many Russian manufacturers have been significantly improved recently quality characteristics of their motor oil and are currently seriously competing with imported brands. Besides, domestic oil usually compares favorably in cost, which is important in our harsh time of crisis. Thus, which oil is better to fill in KIA Rio, each owner decides for himself due to his personal preferences and financial opportunities.
In the end, the choice of the manufacturer is not essential, the main thing is to change the engine oil in the engine of your car in a timely and correct manner.
For KIA Rio, the engine oil is changed periodically with a run of 10 thousand kilometers. The approximate volume of oil changed in the engine is approximately three liters.
Timely shift engine oil can be carried out in a specialized car service or, if there is a desire and time, it can be done independently by the owner of the car.
What oil is better to fill in the KIA Rio engine - you decide
Self oil change
This operation is not particularly difficult and, with proper preparation, will not take much time. To change the oil in the KIA Rio engine, you must have a garage inspection hole or overpass on open area. The procedure consists of two stages - draining the used oil from the engine and filling it with fresh oil. It must be taken into account important point- most often the drain is made from a hot engine and to protect yourself as much as possible from the ingress of oil products. Materials and tools necessary for the implementation of the event:
- Rags to eliminate smudges;
- Gloves or mittens to protect hands;
- A bucket or container for draining the waste product;
- Removal key oil filter;
- Wrench for unscrewing the cap of the pallet.
After carefully unscrewing the sump plug, completely drain the used oil from the engine into a bucket or other suitable container. Then unscrew the old oil filter and install a new one. After that, you need to screw the sump plug back into place and pour fresh oil into the car engine up to the corresponding mark on the dipstick. If there is a leak at the drain plug of the pan, the gasket must be replaced.
Timely replacement engine oil in the KIA Rio engine will ensure the proper operation of all engine components and assemblies, protect against overheating in case of increased loads and ensure its trouble-free operation for a long time.
Video: What kind of oil to fill in a KIA Rio engine
Often motorists, when buying engine oil, pay attention basic basis liquids: synthetics, semi-synthetics, mineral. At the same time, they do not pay attention to the class, type, viscosity of the oil. Such actions may lead to premature exit power unit out of service. It will be right to buy lubricant specified in the car manual. In this article, we will consider the recommended engine oil for KIA RIO in accordance with the instruction manual.
When selecting engine oil for a specific car model, the engineers of the car manufacturer take into account technical specifications motor and operating conditions under which it will operate. Carrying out appropriate tests for various lubricants on a specific engine, allows you to choose the optimal car oil that helps reduce fuel consumption and extends the life of the power unit. Based on the test results, the car manufacturer enters the recommended engine oil for KIA RIO into the car's operating instructions. The manual indicates the viscosity characteristics and the compliance of the lubricant with the requirements of the API, ILSAC, ACEA systems.
When selecting lubricant for Kia Rio, consider the season, overboard the car. Motor oils designed for winter are more fluid than liquids designed for summer. You can buy an all-weather lubricant. It is also worth familiarizing yourself with the tolerances on the oil canister. The presence of approvals from the manufacturer of a particular model of the machine indicates that the oil meets the requirements of the car manufacturer.
KIA RIO JB 2005-2011 release
- For petrol engines:
- quality class according to API -SM or more, in the absence of the specified motor oil, SL fluids can be used .;
- according to the ILSAC standard - GF-4.
- In diesel power units:
- according to API specifications- CH-4 or higher;
- in accordance with ACEA system- B4.
According to table 1, select a lubricant suitable for viscosity characteristics, considering temperature regime outside the car.
Table 1. Viscosity versus temperature range.
*1 - achieve savings fuel mixture allows the use of motor oils corresponding to the parameters:
- according to SAE 5W-20;
- By API system- SM;
- in accordance with ILSAC - GF-4.
From table 1 it follows, for example, in the temperature range from -30 0 C (or less) to +50 0 C (or more) for gasoline engines, use fluids 5W-20 or 5W-30. For diesel units it is recommended to use 15W-40 at temperatures from -17 0 C to +50 0 C (or more). Temperature Range for other types of lubricant is calculated similarly.
KIA RIO QB 2011-2014 and KIA RIO QB FL 2015-2017
Based on the operating instructions for the machine, for engines of 1.4 liters and 1.6 liters running on gasoline, you must use engine fluids that meet the characteristics:
- according to API classifications-SM or more, in the absence specified oil SL fluids can be used.;
- according to the ILSAC standard - GF-4 or higher.
The requirements for the viscosity characteristics of the oil are similar to KIA RIO JB 2005-2011, so the necessary lubricant can be selected from table 1.
Car oil with the following characteristics contributes to a decrease in fuel consumption:
- according to SAE 5W-20;
- in accordance with API - SM;
- according to ILSAC - GF-4.
Conclusion
Lubricants have different fluidity and chemical composition additives. Therefore, it is better to use the recommended engine oil for KIA RIO. Filling an oil that does not meet the parameters reduces the performance of the engine and increases fuel consumption. If the lubricant is too thick or liquid, this will lead to a deterioration in the protection of the power unit and its premature wear. Preferably cast original oils, in their absence, it is allowed to use liquids that meet all the characteristics set forth in the manual for the car.
Choosing the right engine oil will help prevent wear and ensure proper operation. car engine. In this article we will tell you what kind of oil to fill in kia engine Rio. In addition, you will learn how to determine the frequency of work to replace the lubricant and oil filter and how to carry out these works yourself.
[ Hide ]
About replacement intervals
The instruction manual, relevant for cars manufactured in 2010, 2011, 2012, 2013, 2014, 2015, 2016, recommends changing the oil every 15 thousand kilometers. However, in practice, this recommendation is only suitable for operating the machine in optimal conditions, which is not always feasible in Russia and the CIS countries.
City streets are overloaded, cars move at low speeds, stand idle in traffic jams. Under such conditions, the motors operate for a long time at idling, and this does not affect the speedometer readings at all. Also, the replacement period is significantly affected by the quality of fuel at gas stations, which does not always correspond to necessary parameters. Therefore, the optimal mileage of the car between replacements motor lubricant there will be a mileage of approximately 10 thousand km, and when operating in difficult conditions it is reduced to 7–8 thousand km.
Some experts advise, when determining the moment when the lubricant should be changed, use the indications on-board computer. It makes it easy to find out average speed machine movements. If this indicator is more than 50 km / h, you can safely operate the power unit up to a mileage of 15 thousand km. If it is in the region of 30 km / h, the mileage is reduced to 10 thousand km.
Watch a video about changing the oil from user Mikhail Knyazev.
Possible causes of oil consumption
This problem occurs even in completely new cars, but most often this “disease” accompanies cars with significant mileage.
Increased oil consumption can be caused by:
- the presence of leaks in the power unit;
- wear of the cylinder, pistons, rings;
- increased clearance between guide bushings and valve stems;
Typical causes of such problems:
- incorrect operation of the machine;
- movement in dusty conditions;
- work for a long time at idle;
- frequent movement at high speeds.
Which oil is better to choose
The service life of any car motor depends on the quality of the lubricant used. It can be difficult to decide on your own the right choice, since the trading floors are filled with a large number of motor oils different manufacturers And different quality. Look through the recommendations of the car manufacturer, listen to the advice of experts, and only then determine which oil to fill in the Kia Rio engine.
Engine oil for Kia Rio Lubricant QUARTZ HELIX oil ULTRA Oil HELIX
Motor lubricating fluids are distinguished by the season of use:
- winter lubricants;
- summer oils;
- all-weather motor oils.
These products are based on the following materials:
- mineral oils;
- semi-synthetic;
- synthetic.
The manufacturer recommends using synthetic oils for Kia Rio. Various additives are added to such a product that improve wettability, have anti-corrosion properties, and increase wear resistance. Manufacturer's recommended viscosity motor fluid- 5W-20, 5W-30. Also gaining popularity multigrade oils with a viscosity of 10W-40.
If the owner decides to change the lubricant on his own, he should take into account the existing features of the power units of these cars.
- Shell Helix Ultra;
- Total Quartz;
- Divinol;
- ZIC XQ LS;
From this list, the most suitable option will be Shell Helix Ultra. He has complete list the right additives which ensure a long service life of the machine. Total Quartz also has a good set of additives. Lowest flow has Divinol lubricant. ZIC XQ LS fluid can also be safely used for this machine. In addition to the listed lubricants, they use products from Mobil, Castrol, and some others.
Choosing a filter
Oil filter
Replacing engine lubricant in Kia car Rio implies mandatory replacement oil filter. For individual engine modifications, oil filters with different catalog numbers are used. For a power unit with an engine capacity of 1.4 liters, the filter has Catalogue number 2630002503, and if the volume is 1.6 liters, the number is already 2630035504. Its cost can start from 200 rubles, it depends on the manufacturer of the spare part and the margin of the distribution network.
Level control and required volume
The amount of engine lubrication fluid depends on the type of engine and its volume.
| Engine | HP | Year of release (beginning-end) | Engine oil volume, l | Filter, l | ||
| 1.1 CRDi | 75 | 2011 | —> | 4.80 | 0.5 | |
| 1.2i 16V | K1.25 | 87 | 2011 | —> | 3.30 | 0.3 |
| 1.3i | MI-TECH | 75/82 | 2000 | 2005 | 3.40 | 0.2 |
| 1.4i 16V | G4EE | 97 | 2005 | 2011 | 3.30 | 0.3 |
| 1.4i 16V | Y-1.4 | 107 | 2011 | —> | 3.70(3.30) | 0.3 |
| 1.5i 16V | 98/108 | 2000 | 2005 | 3.40 | 0.2 | |
| 1.4 CRDi | 90 | 2011 | —> | 5.30 | 0.5 | |
| 1.5 CRDi | D4FA | 109 | 2005 | 2008 | 5.30 | 0.5 |
| 1.6i 16V | G4ED | 112 | 2005 | 2011 | 3.30 | 0.3 |
| 1.6i 16V | 123 | 2011 | —> | 3.30 | 0.3 | |
Before checking the oil level, it is necessary to turn off the engine after a trip and wait 5-10 minutes until the liquid drains into the crankcase.
Instructions for measuring the level and adding lubricant:
- Place the machine on a level, level surface.
- The oil dipstick is located at the front engine compartment, the filler cap is on the right side of the cylinder head cover.
- Take out the level meter, wipe it with a rag and put it back in place.
- Remove the dipstick again. The lubricant level must be between the Max and Min marks.
- To add oil, turn the oil filler plug counterclockwise and remove it.
- Oil must be poured into the engine, controlling its level on the dipstick. Before removing the level gauge, wait a couple of minutes for the oil to drain into the crankcase.
Motor lubricant must be of the same brand, viscosity and quality class as that previously filled in.
Do-it-yourself engine oil change
Change engine lubricant to Kia car Rio can be done in two ways: this vacuum pumping waste fluid or standard method draining old oil. For the first case, you will need special equipment that will pump out the lubricant through the hole for the dipstick. Such equipment is not available in all service stations, and in personal garages it is not available due to the high cost.
It is much cheaper to replace in the standard way, in which through drainer merges out of date lubricating fluid. This method is considered more reliable, since most of the deposits and contaminants are collected at the bottom of the pan, from where they can be completely removed.
Necessary tools and consumables
In addition to fresh oil, you will need the following:
- oil filter;
- drain plug gasket. Part number 21513-23001;
- empty containers of the required volume for collecting used oil;
- rags to remove spilled lubricant;
- wrench on "17" or a head of a similar size.
In some cases, it may be necessary, 3 liters will be enough.
Action algorithm
Engine oil is drained from the engine only when it is hot. This can be done at the end of the trip or let the engine run for about 10 minutes.
Important! When draining oil on a hot engine, be careful not to get burned.
The procedure will be something like this:
- The car is installed on a flyover, lift or above viewing hole. After that, the stops should be placed under the wheels.
- The crankcase protection prevents the drain of the lubricant, it must be dismantled.
- After that, the waste liquid is poured into an empty container. Before this, carefully unscrew drain plug. The oil filler cap is pre-removed, this will speed up the outflow of lubricant.
- Now remove the oil filter and install a new spare part.
- The drain plug is cleaned of impurities, a new gasket is installed on it, and then screwed into place.
- Pour the required amount of motor lubricant into the engine, how much to pour it was previously reported. The volume of the poured mixture is controlled by a measuring probe. The lubricant level must be between the Min and Max marks.
Such an operation does not cause any particular difficulties for the owners. It is easily done in the garage with your own hands.
Filling engine oil into the engine
Filter replacement
Some difficulties may be caused by the removal of an old oil filter. On a hot engine, it has a high temperature, so you should work with gloves. It is not always possible to unscrew it with your hands, you can use various devices to dismantle it. Some drivers pierce the filter housing with a thin screwdriver or punch, and then use this tool as a lever with which they turn the filter out of place.
Before installing a new filter, fill it fresh butter. It will be enough to pour 150–200 grams of lubricant, lightly oil it sealing ring. After that, install the filter element in its place. To seal the filter, it is enough to tighten it with your hands, in the future this will make it easier to dismantle the product that has served its time.
KIA RIO FAQ user shows oil and filter change on video
Consequences of late replacement
If you do not comply with the oil change intervals, accelerated wear of engine parts occurs. Modern oils have additives that improve their properties. Working in conditions high temperatures, these additives gradually burn out, the lubricant performance deteriorates. As a result, there may be oil starvation which can cause the crankshaft bearings to rotate.
Parts of the turbocharger compressor suffer greatly from the used oil. Contaminated grease clogs the oil supply channels, which can cause the shaft of this assembly or other mechanisms to jam. old oily liquid poorly removes temperature from overheated parts of the motor, which also has a bad effect on its condition.
