What oil for Nissan Juke 1.6. How to change the oil in a Nissan Beetle engine with your own hands. When does a Nissan Juke engine oil change need to be changed?

Currently car repairs with my own hands– the process is not long and not expensive, unlike service stations. Replacement lubricating fluid And air filter for some time now it has been possible by the hands of the car owner using minimum set tools. In order to carry out a high-quality oil change in a Nissan Beetle engine with your own hands, you need to arm yourself step by step instructions and adhere to a clear sequence of actions.

When does a Nissan Juke engine oil change need to be changed?

Factors affecting frequency oil changes, may be of the following nature:

Car mileage.
Driving in difficult urban or extreme conditions.
Choice of oil. When purchasing quality lubricant, which fits this category of car, replacement is carried out less frequently.
The technical condition of the car at the current time.
Change of season of the year.
Intensive use of the vehicle.

Signs that replacement is needed:

Thickening motor oil.
Entry of other particles into the lubricant, including dust and dirt.
Color change motor fluid in system.
Disks overheating.
Car sagging, even at idle.
Reducing the overall power of the vehicle.

If these symptoms appear, it is necessary to check the condition of the lubricant as soon as possible. power unit and replace it, because delay can lead to engine wear and negatively affect its overall performance, including breakdown and subsequent expensive repairs.

Which oil should you choose?

Available types of oils for Nissan are presented in a wide range price category. First of all, you should pay attention to the following brands:

Q8 oils 5W30 VX Long Life III;
Bardahl xtec 5w40;
Lukoil Genesis FE 5W-30;
Castrol Magnatec 5W30.

Also, when choosing, it is worth remembering that synthetic oil for Nissan Beetle has a number of advantages over mineral oil. First of all, the synthetic product does not have the properties to thicken over a long period of time, so it can last the entire service life vehicle. also in synthetic oil There are practically no suspended matter.

The process of changing the oil in a Nissan Beetle 1.6 engine with your own hands

The necessary tools for changing the lubricant in the engine are as follows:

Canister for draining lubricant with a volume of about 5 liters.
Original oil filter, which fits the Nissan Beetle model.
Original drain plug.
Engine oil.

Step-by-step instructions for replacing the product should include the following steps: warming up the oil, draining, cleaning the engine. In order to efficiently replace the oil filter and oil, you should adhere to the following sequence of actions:

Place the car on a level surface.
Turn on the ignition and warm up the vehicle for 10-15 minutes.
Turn off the car.
Remove the protection on the tank and unscrew the drain plug.
Using a prepared canister, drain the old engine fluid.
Clean the drain plug using a specially prepared rag.
Implement complete replacement oil filter, to do this, loosen the special tightening and pull the handle.
Install a new oil filter - to do this, firmly install the new element in a specially prepared place.
Lubricate the filter rubber with new grease.
Fill in new oil according to the volume, using the dipstick as a guide.
Screw in the oil filter until it clicks.
Check the seal of the lid several times.
Close the hood.
Ignite the vehicle.

Flood new lubricant It is possible without replacing the oil filter, but it is worth remembering that this may affect the quality of operation and service life of the new motor lubricant.

Changing the engine oil Nissan Juke necessary to ensure that the vehicle serves its owner as long and properly as possible. It should be carried out every 10 thousand kilometers. This will help avoid the appearance of suspensions and other particles in the product, as well as thickening of the liquid.

The oil change in the Nissan Beetle engine occurs through a special gasket on the automatic transmission drain plug. Worth your time Special attention this element, since in the case untimely replacement Possible lubricant leaks. Oil spark plug repairs should also be carried out on a regular basis.

Summarizing the above, it is worth noting that replacing motor fluid is possible with your own hands with a minimum amount of effort. In order for a vehicle to serve its owner for a long time, it is worth paying maximum amount time to change the oil filter and oil.

Modern motor oils are the result of serious and extensive scientific and technical research, which ensures the most precise match to the characteristics of engines different models foreign cars and major industrial standards.

It’s no secret that the engines of foreign cars, including those Nissan brand Juke, were assembled on conveyors with greater precision and with less tolerance in gaps. This indicator varies from several hundredths to several thousandths of millimeters. Therefore, the choice of oil for Nissan Juke and the requirements for it special situation than that of domestic vehicles.

If you bought new car, then the question: “Which engine oil for Nissan Juke is best to fill in?” will answer you official dealer from whom you purchased this car. Original NISSAN engine oil will be just right here.
If you purchased a car second-hand, then you need to start by studying service book car. There is a section where it is necessary to indicate which oil, with what tolerances and additives, the manufacturer recommends pouring into the engine.

If such a service book is missing or lost, obtain information from official representatives given by the car brand or from direct suppliers of spare parts and parts for your car brand. And don’t forget, the first thing you need to know is the oil tolerances specific to your car’s engine. And it’s impossible to find a brand of oil with a manufacturer special labor.

Tolerance is a set of additives that meets accepted quality standards and is suitable for of this type. It is provided and developed for each motor separately. And the same brand of car, but with different engines, they can be different, and there can be several of them. This property must be taken into account when choosing. On the market today automobile oils is provided wide choose wide variety of products intended for different conditions operation. It is unlikely that you can use mineral or synthetic motor oil for your Nissan Juke foreign car without questionable consequences. If you want to save money and don't plan to soon carry out major overhauls of the engine in your car, then buy and use only a synthetic product produced well-known companies.

In hot summers and warm periods of the year, if the air temperature outside the window is not lower than five degrees below zero, Mobil1 5W-50 Supersyn PeekLife will be quite suitable. In winter, you can use the Mobil1 0W-40 Supersyn NewLife option. The oil level must be checked every week. Its deficiency has a detrimental effect on increased depreciation of engine parts. Most often in such cases, the gas distribution mechanism and camshaft. In addition, try not to add, on the advice of friends or acquaintances, to the composition of the product used. various additives, and other additives.

Important! Such self-intervention may end major repairs for your motor.

For low mileage, the oil change in Nissan Juke should be done once a year during the vehicle's technical inspection. Moreover, diesel engine The engine oil change period is two times shorter than that of a car with a gasoline engine.

24.05.2018

Every driver periodically faces the procedure of changing engine oil. Because this procedure is included in the list of periodic maintenance replacements; it cannot be avoided.

We will look at the example of a 2014 Nissan Juke with a 1.6 MR16DDT engine.

I should immediately note that this article is very universal and is suitable for the entire line of Nissan or Renault with MR16DDT engines, these include:

Tiida
Pulsar
X-Trail

How often to change?

According to the Nissan Beetle maintenance, the engine oil is changed every 10-15 thousand kilometers, in other words, once a year.

But because Russian roads are difficult operating conditions, the interval between replacements is reduced by 1.5-2 times. (or every six months).

original Nissan oil or similar in quality:

API - SL or SM;
ILSAC - GF-3 and GF-4;
ACEA - A1/B1, A3/B4, A5/B5, C2 or

In terms of viscosity, the best are SAE 5W30 or SAE 5W40, but this indicator may vary depending on the region of your residence and the operation of the car.

Amount of oil poured is approximately 5 liters (more precisely 4.5-4.3 liters).

In our articles, to make your work easier, we indicate all consumables with their search codes. Here's what we need:

Original canister Nissan oils 5W40 - KE90090042.

Original oil Nissan filter- 152089F60A or 152089F600.

MANN FILTER W671,
MAHLE C1052,
BOSCH 986452061,
ALCO SP1002 and others.

Original washer drain plug Nissan - 1102601M02.

In all our articles we indicate and original parts and consumables and their analogues. Both of them do their jobs well. If you have the opportunity to spend money on original oil, then do not spare the money.

How to change oil Nissan Beetle 1.6

To carry out the oil change procedure we will need:

hex head 8
set of filter and rubber seal;
tray for draining used oil (volume +- 5 l)
rag
new oil
oil filter puller

First of all, warm up the engine.

We drive the car into a pit or jack it up back. Unscrew the cap that covers the oil filler neck.

Now we move on to protecting the fuel rail, namely its removal. To do this, unscrew the two 13 nuts.

Access to the oil filter is gained.

IN this car The oil change procedure is quite well thought out, and a drain hole is made for this purpose. It may be inconvenient for beginners to drain, because... it is wide and the oil splashes a lot. Therefore, the container for draining should be placed as close to the hole as possible. After this, unscrew the plug with an 8 by 8 mm (square) nozzle.

After this, remove the lid completely along with the filter and rubber band.

Now we are replacing the worn cartridge with a new one full set together with the sealing ring (carefully lubricate the ring with oil).

Next, we assemble everything in reverse order.

Once everything is installed and tightened, we begin pouring in the oil. We do not pour everything at once, but in portions.

Let's start the engine and let it run. We're jamming.

The car sits at rest for 10 minutes, then we take out the wood chips and check the level. The oil should be at the top mark on the dipstick.

Report a bug

Select it and press Ctrl + Enter

Even the appearance of the first generation Volkswagen The Crafter, upon its release, caused confusion among car manufacturers in the LCV segment.

This time, the second generation Crafter chose an even better time. Competitors have just updated their lineup. With the arrival of the second generation car from the German concern, competition will become even more intense.

Features of the van. Throughout the entire commercial line German company it is the van that is most in demand. Yes, and passenger versions are in this segment.

The largest van in the line reaches seven meters with an overall height of 2.5 m. The vehicle is equipped all-wheel drive, which only adds to its stability. For the driver's convenience, all-round visibility of parking sensors is equipped. For large car such an assistant is needed.

The van is equipped with dual climate control. There is no reason to equip a car like a refrigerator. But when transporting perishable products, it is sometimes necessary to create relative coolness. With a total compartment length of more than 4 meters, height and width of 2 meters, efficiency air conditioning system stays on top.

The loading height of 670 mm allows you to avoid straining when loading. The total volume of almost 16 m3 allows you to load fairly large quantities of goods.

Driving position and driving characteristics. The vertical seating position of the driver does not require getting used to if you have already “held” such a vehicle in your hands. Even with a stiff suspension, vibrations are almost not transmitted to the driver’s body.

You will be pleased with the well-profiled seats. They no longer resemble a flat sofa, where you have to lean on door frames or a neighbor when turning.

Rigid suspension for freight transport should still be considered a necessity. This will allow you to avoid rolls when maneuvering. Moreover, the engine allows you to drive the car actively.

Diesel engine with a 2.0 liter turbine. configured to deliver 140 hp. This is enough for “passenger” acceleration in the urban cycle. When driving in the suburban cycle with average speed Fuel consumption is in the range of 9-9.5 liters. The noise level does not exceed 75 dB.

Among other small details, the three-story design of the front console stands out. Not only will all the papers fit here. There is enough space for the driver's personal belongings and water bottles. Additional compartments are traditionally located behind the seat backs. You can also find a hiding place under the passenger seat cushion.

What's the result? Even in basic configuration The car has everything necessary for the comfort of the driver and accompanying persons. The company can offer many more options for a potential buyer. But it is unlikely that a professional driver will look in the direction of an automatic parking attendant.

With a base price of 2.5 million rubles, due to additional equipment the amount can increase to 4.22 million.

Starting from the second generation, the Crafter can only be electric. It is not yet known whether the e-Crafter will be supplied to Russia. So far the company has not disclosed this information.

There is no law in Russia that would regulate the process of buying and selling license plates.

Vehicle license plates will be provided during the procedure state registration vehicle with the traffic police. All numbers, however, can be “evaluated” based on certain characteristics. The size of the score is based on the originality of the combination of numbers and letters in the number.

Types of license plates for cars. Among all existing license plates, the following categories can be distinguished:

Premium rooms. A special feature of these numbers is the presence of two or more identical symbols on them. An example would be number A333AA, or B999BB. Such numbers have a high level of popularity, which generates a considerable price.
License plates with hundreds. On numbers of this type, only hundreds are marked, and hundreds do not matter. For example V600KV.
Triple numbers. Their feature is the identity of three numbers or letters. For example, B345BB.
Decimal numbers. In them, the decimal number is necessarily marked with numbers. For example, T002ET.
Mirror type of rooms. Their feature is the identity of the first and last digits used in the number. A808BB. Price similar numbers low, although they are very popular.
Combination of letters. If you read the first and last two letters, you may get a certain letter combination, for example K056OR.

All types of numbers that were listed above are in demand.

Official acquisition. In many countries there are special auctions where the subject of bidding is automobiles. registration numbers. Outside of these auctions, the sale of license plates is strictly prohibited.

According to the officially adopted regulations, the provision of license plates is carried out out of turn. But everyone understands that the letter of the law is not always followed. How is it possible to complete a transaction without violating the law? What to do if beautiful room There is no way to buy it at the traffic police department, but I really want to. There is only one legal solution - you can buy the number you like along with the car on which it is installed.

"Thief" numbers. Such numbers are a series of letters that indicate that the car belongs to an employee of a law enforcement agency, state, government or large city institutions.

In a situation where federal and large city structures are assigned personal numbers, There is nothing bad. The most unpleasant thing is that such state numbers cannot be obtained to an ordinary car owner, but they can be purchased for a lot of money, due to the fact that they emphasize the high status of their owner. This was the reason why such numbers began to be called “thieves”.

This type of number is usually strictly tied to the region. Final cost given number determined by market conditions.

Bottom line. There are plenty of offers of this kind of numbers on the Internet and on numerous websites. You can order a similar service in almost any part of the country. The best option would be to purchase similar numbers from friends, but this is rare.

Particular attention should be paid to the registration process. It is best to use only reliable intermediaries who act exclusively within the law. Since, according to current legislation, the owner registration plate is the state.

The first such caustic medium is called brake fluid. It quickly contributes to the destruction of the protective layer of paint. If a single drop gets in, it is recommended to quickly remove it with a dry rag.

In case of body restoration, water-soluble paints are used. In this case, they pay attention to the processing of body panels. The components used should not contain ammonia. This element is only permissible when cleaning surfaces before painting or for wiping off paint if it gets on third-party elements.

Another destructive one liquid composition is an electrolyte. An acid solution, of course, can corrode protective layer body In battery maintenance practice, distilled water is used, and quite rarely, acid itself. The electrolyte can only accidentally get on the surface of the body due to careless actions when measuring density or adding an acid solution.

Any car maintenance work is carried out in compliance with the necessary precautions.

Changing the oil of a 2014 Nissan Juke with a 1.6 MR16DDT engine is standard procedure for the vehicle. Changing the oil yourself, along with the oil filter, is not at all difficult.

Owners Nissan cars or Renault with MR16DDT engines (such as Tiida, Pulsar, X-Trail, Clio) this photo report may also be useful.

When to change and what kind of oil to fill in Nissan Beetle

The frequency is within 15,000 km. Considering difficult conditions operation (long periods of idling, frequent trips over short distances, dust, etc.), The oil can be changed more often - every 10,000 km or more. Along with the oil, the oil filter is also changed.

The oil filling volume in the 1.6 MR16DDT engine is 4.5 liters of new oil including the oil filter and 4.3 without it.

We recommend original Nissan or equivalent API quality- SL or SM; By ILSAC quality- GF-3 and GF-4; ACEA quality - A1/B1, A3/B4, A5/B5, C2 or C3. According to viscosity it is preferable SAE oil 5W30 or SAE 5W40, but this parameter may differ based on temperature range region in which the car is driven.

Necessary consumables for changing the oil Nissan Beetle 1.6:

Canister (5l) original oil Nissan 5W40 - KE90090042.
Original Nissan oil filter - 152089F60A or 152089F600. Analogues: MANN FILTER W671, MAHLE C1052, BOSCH 986452061, ALCO SP1002 and others.
Original Nissan drain plug washer - 1102601M02.

How to change oil Nissan Beetle 1.6

Instructions from the repair and maintenance manual

The oil is changed when the engine is warm so that it drains better. If you unscrew the filler cap and lift oil dipstick, it will flow out faster.

Heated oil can burn, so be careful when unscrewing the drain plug.

Place the car on a level surface and raise the handbrake.
Start the engine and warm up for 5 minutes.
Turn off the engine and wait 10 minutes until the oil drains into the pan.
Raise the car (jack and supports, pit, overpass, ramp).
Remove the engine protection, if installed, by unscrewing the screws and clamps.
Open the hood.
Place a container to drain the oil under the pan.
Unscrew the drain plug and drain the oil into a container.
Clean the plug and replace the washer on it.
When the oil stops flowing out, tighten the drain plug.
Drain plug tightening torque - 34 Nm (3.5 kg-m)
Move a container under the oil filter.
Loosen the oil filter using a puller and unscrew it by hand.
Wipe seat And remove the old one sealing gum filter if it is attached.
Lubricate the rubber of the new oil filter with fresh oil.
Twist new filter by hand and tighten 2/3 of a turn as soon as the first resistance appears.
Oil filter tightening torque - 17 Nm (1.8 kg-m)
Pour into the engine required quantity fresh oil(with the probe inserted).
Screw on the lid and repeat steps 2-3.
Check drain bolt tightness and the oil filter, if necessary, tighten it.
Check the engine oil level using the dipstick - it should be between the upper and lower marks, closer to the top.
Reinstall the engine protection, remove the jack, close the hood.