When preparing for the winter season, in addition to changing wheels, the driver must also take care of the wipers. If the wipers are loose or streaky, they must be replaced. Indeed, in snowfalls, good visibility is simply necessary - otherwise the occurrence of emergency situations is guaranteed. But how to approach the choice correctly? After all, the selection of wiper blades is quite a responsible occupation. In order not to get completely confused in a huge assortment, let's take a closer look at what wipers are, and find out which option is better.

The main criterion for choosing wiper blades is the ability to clean glass

There are just a few basic criteria by which drivers usually rate wipers:

• the ability to clean glass efficiently without leaving streaks, a thin film or smudges;
• the ability to remove icing and frost from the glass, while so that the brush does not lose its shape, does not tousle and does not become stiff;
• resistance of rubber wipers to aggressive components of the washer.

In terms of appearance, good quality wiper blades should have a uniform color and texture, and the blades should be made of good rubber, without any burrs or roughness on the surface. The rubber bands for the wiper blades must be tight, free from delamination and must adhere very well to the body. The wiper blade holder must be tight enough, no backlash or free play should be created during movement, otherwise the wipers will fail very quickly.
When buying wiper blades, be sure to make sure they fit your vehicle not only by model type and size, but also by attachment type. Often, for parts of the same size, the type of attachment is different, for example, for cars of the same model, but different years of production, the attachment of the wiper blades may be different: button, bayonet, hook, side clip, etc. But if you accidentally purchased the wipers with the wrong mount, you can always buy a special adapter. The length of the wipers can also vary markedly - from the driver's side about 500-450 mm, and the rear wiper blade - 300 mm or more. In general, the length directly depends on the car model.

Service life also remains one of the most important criteria: according to the standard, it is 400 hours. Even the best wiper blades wear out after 400 hours of use, according to ADAC (General German Automobile Club) tests, but cheaper options fail much faster - after 100 hours. The service life largely depends on the operation. Cleaning the glass without a washer and trying to clean the ice with wipers leads to their very rapid wear. The service life of the wipers can be extended by periodically flushing them from dirt and sand in the grooves, thus significantly reducing the friction force.

Types of wiper blades

In addition to the brand, the country of origin, the price and quality of the wipers are structurally different. According to the technical parameters, the wipers can be of the following types:

Car wiper blade

In addition to the brand, the country of origin, the price and quality, the wipers have structural differences and different technical characteristics.

There are also wipers with narrower specifications:

• winter (designed for countries with cold climates, capable of removing the ice crust, but in fact they are impractical and have rather low aerodynamic characteristics);
• original (they have an original mount and most often represent another trick of manufacturers who want to make money on consumables);
• a rear wiper used, oddly enough, on the rear window.

Wiper Blades Manufacturers

There are a great many manufacturers of wipers for cars today. It is best to choose universal wipers in the middle price range and above. As mentioned earlier, cheap wipers wear out much faster.
One of the leaders in the car wipers market was and remains the German company Bosh. Fans of frame wipers are especially fond of this brand. The advantages include a very high, wide range, natural rubber coating, good low temperature tolerance and price. The Bosh wiper blade kit will last long enough at a very reasonable cost.
Denso Hybrid wiper blades are one of the best options among "hybrids". Japanese developments have always been of the highest quality and practicality. Denso wipers do not make noise and perfectly clean glass without leaving streaks. In addition, they are extremely reliable in all weather conditions. But they also have drawbacks - they are very sensitive to road reagent and they often make fakes.
Champion wiper blades from the American manufacturer can be safely attributed to the "cheap and cheerful" category. At a low price, they cope with their functions conscientiously. They are sufficiently resistant to various weather conditions and do not leave streaks on glass. Among the shortcomings, we can note the strong adhesion of snow and the appearance of noise, etc.
In conclusion, we can say that the choice of wipers very much depends on the tastes and preferences of the car owner. It's hard to say which car wipers are better - they all have both advantages and disadvantages. Each manufacturer tries to surprise the consumer and add something of their own. Most motorists choose the old-fashioned way based on a combination of price and quality.

No matter how new and modern your car is, safety in low visibility conditions largely depends on something as simple as the wiper blades. If the replacement is untimely, the road visibility deteriorates and there is a risk of an accident. But it also happens that completely new brushes leave marks and stains on the glass, do not adhere well enough to the glass. Often the windshield wipers do not withstand the winter season, frost and temperature changes lead to the loss of rubber properties. It is clear that any motorist would like, without spending too much, to purchase brushes that will do their job well for a long time. Rating according to Mark.guru will help you choose the best wiper blades among different types of designs.

Before making a purchase, review the following characteristics:

1. Construction type... All wipers are divided into frame, frameless and hybrid. Each has its own pros and cons, so you need to figure out which one is best for you.
2. Fastening. Some models have adapters for different types in the kit, but there are also those that are suitable only for a certain mount.
3. The size. Depends on the make of the car, select so that the wipers do not touch each other during operation, but also clean a sufficient area of ​​the glass.
4. Manufacturer. Brushes from well-known manufacturers will last longer than cheap Chinese ones, but on condition that they are not a fake or a defect.
5. Seasonality. There are universal options, but you can purchase it for a specific season. Elastic band for wipers of such models is softer and does not lose its properties at low temperatures.
6. The price and quality of the material. As a rule, these are interdependent parameters. You will hardly be able to accurately determine the workmanship when the brush is in the package. But if the price is too low, treat the product more carefully, it would be good to listen to the reviews of those who have already bought wipers in this store.

Frame wiper blades

This is the cheapest option and is designed to provide the best fit for the rubber wiper blade to the glass. Fitting is provided by movable metal rocker arms on hinges.

In modern windshield wipers, the axles are usually plastic for better performance in cold weather and less icing. The disadvantage of this type of brushes is low wear resistance.

Firstly, they are poorly suited for winter, freezing and icing of metal parts occurs. Secondly, in case of poor-quality performance, the moving elements loosen, the geometry is disturbed, as a result of which the rubber strip is deformed and cannot cope with cleaning the glass.

This is a model of the French company Valeo, which produces components primarily for European cars. BMW, Mercedes, Volvo and Audi assembled in Europe are produced with wipers of this brand. There is a wide range of models in the assortment, you can choose according to the size or the car model, they are made for a standard "hook" fastening.

The brushes have high quality workmanship and materials. Rubber behaves well even in winter conditions. Hardening in the cold, after warming up the car, elasticity and softness are not lost. When using, there is no squeak, streaks.

The model has a rubber wear indicator, so you know exactly when to buy new brushes.

This model is positioned as the quietest due to its low coefficient of friction. The frame is securely attached to the rubber at six points. The base of the plate is very high, which completely eliminates the contact between the frame and glass.

• quality materials and assembly;
• snug fit;
• silent work;
• resistance to wear.

Cons: there are no adapters for other types of fastening included.

The average price of a set of two brushes is 1800 rubles.

Prices on :

In second place is the famous and popular German model Bosch Twin. They are also made for hook fastening. The brushes are thin and flexible, and the rubber edge is quite stiff, which results in faster wear. The narrow working part of the brush also tends to warp over time. On the other hand, Bosch brushes handle dirt and slush well. The metal rocker arms of the frame hold the rubber base at five points; there are additionally plastic inserts at the joints.

Interestingly, the metal plate is located inside the elastic, and not outside, as in most frame models.

• high-quality cleaning;
• snug fit;
• easy installation thanks to the Quick-Clip adapter.

Cons: wear out quickly.

The average price for a set is 1,700 rubles.

Prices on :

The third place in the rating of frame brushes is the German model Heyner Exclusive. The metal frame is fully galvanized, the spring is made of stainless steel. The brush has good aerodynamics, providing good pressure and full performance even at high speeds. There is even a special anti-reflective coating on the case.

The model has a wide range of sizes, hook fastening. But you can purchase an adapter separately, which will allow you to use the wipers on almost any car model.

In addition, the design assumes the possibility of replacing the cleaning rubber for the brushes, which allows some savings on replacement. But this is also the weak side of the model, since the collapsible structure creates the risk of stratification of the wiper in frost, when the rubber part freezes to the glass.

• low price;
• high-quality cleaning;
• snug fit at any speed;
• the ability to use an adapter for other types of mounts.

Cons: freezing to glass in winter, risk of delamination of the structure.

The average price is 800 rubles per set.

Prices on :

4. Champion Aerovantage

A feature of the brush is a completely metal body design, as well as a universal connector that allows the model to be used on different types of mounts.

Spring connections at the base of the frame ensure a snug fit to the glass, the brushes are lightweight and quiet enough.

• high quality rubber element;
• smoothness of work;
• universal mount.

Cons: Tendency to loosen the hinge structure.

Champion Aerovantage Prices:

Frameless models

In such wipers, the cleaning rubber strip is attached to two thin metal plates, and the entire structure is housed in a flexible plastic case.

At the same time, the tightness of adhesion to the glass is somewhat lower than that of frame models, but such wipers are not susceptible to icing in frost and work great in any weather.

They cost a little more than models with a metal frame.

1. Denso Flat Blade

The best frameless model was brushes from the Japanese company Denso Flat Blade. They show their high performance, first of all, due to their excellent aerodynamics. The thin cleaning edge and flexible base provide excellent water, dirt and slush removal without smudges or streaks. The brushes work smoothly and silently, literally sticking to the glass and cleaning it dry.

The model has a universal mount, an anti-freeze frame allows you to use them in any weather.

• effective work;
• good glass cleaning even at high speed;
• easy installation.

Cons: short service life.

The average price is 1,300 rubles per set.

Denso Flat Blade prices:

Excellent frameless wipers from a French manufacturer, but at a very high price. Plus, it's the same traditional hook-and-loop fastener that won't fit all cars. But the execution of the model is simply excellent. The rubber material used is the same as in the frame model of the rating, namely, it has exceptional softness, elasticity and wear resistance.

In addition, the design has improved aerodynamic characteristics, providing accelerated deflation of the water removed by the brush with a stream of air.

There is also a proprietary color-coded wear indicator.

• quality material and workmanship;
• good performance when driving at high speed;
• durability.

• high price;
• there is no adapter for other types of mounts.

The average price for a set is 1900 rubles.

Prices on :

In the segment of frameless models, the German Bosch Aerotwin took only third place. Their advantage is also good aerodynamics, which is what determines a snug fit to the glass. At the same time, water, dirt, snow are removed qualitatively. Even on dry glass, they glide smoothly and without squeaks.

Silicone is added to the rubber, which makes the brushes soft and resilient, making it easy to use in cold weather.

It is also worth noting the presence of a universal mount in the model, which makes it easy to install wipers on a variety of cars.

• high-quality cleaning;
• frost resistance;
• universal mount;
• wear resistance.

Cons: the risk of scratching the glass with metal fasteners due to deformation or wear of the rubber part.

The average price for a set is 1200 rubles.

Prices on :

Hybrid brushes

Hybrid brushes combine all the advantages of the previous two types. They have a metal frame that ensures good grip of the elastic to the glass, but it is hidden in a special plastic casing. It prevents both contamination of the frame elements and icing in frost. Plus, good aerodynamics allows them to fully cope with their tasks when driving at high speed. The only drawback of this type of brushes is their high price.

1. Heyner Hybrid Graphit

This model is distinguished by high quality rubber with a special graphite coating. It allows you to achieve smooth, quiet operation. This variant of the best hybrid wipers reflects all the design advantages. Excellent aerodynamics, stylish design, well thought-out frame, pressing the brush tightly to the glass.

At the same time, the plastic cover reliably protects metal elements from moisture and low temperatures.

Heyner Hybrid Graphit is great for any weather.

• high-quality cleaning;
• suitable for different types of fastening;
• good value for money.

Cons: deteriorates in cold weather.

The average price is 900 rubles per set.

Prices for Heyner Hybrid Graphit:

2. Denso Hybrid Wiper Blade

The Japanese model of hybrid brushes features a special springy frame. It allows the cleaning edge to fit snugly against the glass. The working surface is graphite coated and has a long service life. The case with a stylish matte finish reliably protects the frame from dust and dirt.

This model shows high performance both in frosty weather and in hot sun conditions.

Advantages:

• long service life;
• good work in all weather conditions;
• universal mount;
• easy installation.

No flaws were found in the model.

Denso Hybrid Wiper Blade pricing:

In third place are the premium hybrid brushes Trico Hybrid. They are lightweight and quiet. Structurally, they are very similar to the popular Denso Hybrid.

Teflon is included in the rubber of the brushes. It allows you to maintain all performance characteristics in any weather and season.

Advantages:

• high-quality cleaning;
• good aerodynamics;
• noiselessness.

Disadvantages: substandard fakes are often found.

The average price is 1400 rubles per set.

Prices on :

Conclusion

This is the rating of the best models of wiper blades of different designs. To make the right choice, first decide on the type of wipers, then select the model. After evaluating all the criteria, you can choose the best price-performance ratio for yourself. Remember that the most expensive models, for example, from Valeo, will last more than one year, and the cheaper ones may have to be replaced in a few months. Also, if you have a standard hook mount, then you shouldn't overpay for models with included adapters. The best choice is always individual, and the ratings only help to make a decision.

When choosing wipers, you should focus on products that have graphite base as well as frost-resistant rubber... With the next change in weather conditions, the motorist should definitely check the effectiveness of the wipers. If there are stains on the windshield, after several strokes of the wipers, the wiper blades must be replaced. Otherwise, poor visibility in rain or snow can lead to an accident. It is worth noting that a very wide range of assortment is presented in car dealerships. In these car dealerships, you can see brushes of various manufacturers, at very different prices and, of course, of different quality.

There are four types of car windscreen wipers:

Frame wipers (summer) are the classic and most common wiper design. In these wipers, the rubber blade adheres to the convex surface of the car glass due to the rocker arm system with hinges. Until the early 2000s, these wiper designs had all-metal hinge pins. This kind is inexpensive. Together with this, they are rather strongly exposed to loosening. Due to this, the mechanism does not last long. Also metal hinges are more prone to freezing. Because of this, they wear out faster. Metal hinges are also more prone to freezing and wear out quickly.

Modern wipers have plastic bushings and axles. These wipers are less prone to icing. At the same time, they are better cleared of the ice crust. During the period of positive air temperature, this design has an excellent effect on the quality of the wiper. Thanks to the plastic hinges, the rocker arms are more flexible and precise. In addition, the frame in the transverse direction is more rigid. At the same time, the rubber blade adheres better to the glass.

However, all these statements are not always true. In the event that the wipers are cheap, then the materials from which these wipers are made are most likely of poor quality. In this case, the wipers will creak, and also loosely adhere to the glass. Summing up the results regarding the frame wipers, it can be noted that their main advantage is their inexpensive price, and the main disadvantage is the fear of icing.

The service life of a brush made of high quality materials can be a year or more. If the quality is not the best, as well as the assembly, then as a rule, the service life of frame wipers is 6-12 months. Then stains start to appear on the glass and the "cleaners" require replacement.

The price for frame types is from 150 to 350 rubles per piece. Top Brands: Bosch Aerotwin / Twin, CHAMPION SX.

This type of car wipers has a rubber-plastic body shaped like a spoiler. In such a case, two thin metal plates are poured. A rubber blade is inserted between these plates. This blade is also used for cleaning glass. Both ends of the wipers have plastic caps. The mounting bracket is located in the center. This design is less sensitive to icing. It has no wear hinges. Also, this design has the best aerodynamic characteristics. These wipers are not warped. They move on the glass almost silently. With all this, thanks to this design, it is possible to replace the rubber blade. In this case, it is enough just to remove the plugs. This allows you to significantly save money and time.

The disadvantage of frameless wipers is their lack of versatility. That is, specific windshield wipers are designed for a specific vehicle. At the same time, the systems for fastening frameless brushes between different manufacturers are not unified. Thus, the main advantages of frameless wipers are efficiency at high speeds, as well as increased resistance to icing. The disadvantages of these wipers are the lack of versatility, as well as a high pricing policy (500-650 rubles per unit of goods). The best frameless brushes: CHAMPION, BOSCH, ALCA, DENSO.

Best-of-breed hybrid car wipers

The main difference between hybrid wipers and classic wipers is the very low frame height. Thanks to this, the designers managed to fit the frame under a small cowl-fairing. Wipers of this type also have the advantage of frameless wipers, which is expressed in the effect of an aerodynamic wing, which increases the force of pressure of the wipers on the glass. This type of brush has a developed articulated frame that allows the rubber blades to fit snugly against the glass. This is especially important in the case of vehicles with a highly convex windshield profile. The prices for these wipers are rather big, but this is compensated by the quality of cleaning, as well as a long service life.

The reason for the best consumer qualities of such wipers lies in the use of improved materials. So they use a natural rubber insert with a high density. Such rubber can withstand intense friction, moisture and light. Wipers of this type retain their elasticity, resilience, as well as the geometry of the working edges throughout the year. The main advantage of these wipers is their durability, as well as the ability to use both in summer and winter. The disadvantage is quite high prices (price from 500 to 1500 rubles and more).

These are ordinary summer (frame) wipers, only hidden in a special cover, which prevents them from freezing in the cold season, and also allows them to be easily serviced if the windshield is covered with snow. These wipers should be used only in winter, since in summer you cannot drive with them more than 90 km per hour - the casing starts vibrating and the brush jumps over the windshield.

The price for winter windshield wipers is in the region of 350-2500 rubles and above. It is worth paying attention to the models from 1000 rubles and above, as they will cost it. Best winter brush brands: Trico Ice, MARUENU Gyraless Snow.

And yet, if the wipers lasted 3-4 seasons, then this is very good, since low-quality, cheap specimens cannot withstand normally one season.

Video - how to replace the wiper blades on a car:

Video about a review of wipers for cars:

When operating a vehicle in rainy weather, visibility through the windshield is sharply reduced. The wiper blades cope with the task of cleansing glass from slush, sand mixtures, salt, reagents and other mud streaks. Choosing the best wipers for a car, drivers evaluate the quality of the functions performed, how clean the glass remains after passing the brushes. The better the wipers work, the broader the view of the roadway during rain, snowfall, etc.

When choosing the most suitable windshield cleaning tools, drivers have strict requirements for functionality, durability, appearance, and workmanship. What factors are considered important:

1. The brushes do not leave streaks, stripes, wet marks on the glass that obstruct the view.
2. At subzero temperatures, the wipers clean off the frost, remove the icy layer.
3. The products do not change their structure when working in the cold (do not fray, do not harden).
4. Strict requirements are imposed on the materials for the manufacture of brushes. The rubber must not react with chemicals used by road services or with chemicals added to the windscreen washer fluid.

Correctly selected wipers cope with the task, provide an overview of the roadway, minimize the likelihood of an accident, collision with pedestrians.

Varieties of models of wiper blades

1. Wireframe.
2. Winter.
3. Frameless.
4. Hybrid.

Rigid frame brushes are a classic budget option. The working blade of such a wiper evenly adheres to the glass surface.

Winter wipers belong to the category of frame structures. The rubber is packed here in a special cover that protects the elastic material from ice formation.

Frameless models are all-season, they consist of a plastic case, inside which a rubber sheet is securely attached.

Hybrid designs are considered the best solution. When developing such wipers, the positive qualities of frame and frameless options were used.

Best Frame Wiper Blades

Frame-type car wipers are considered the most common. Frame wiper blades were the first to appear on the automotive market at a relatively low price. The structures consist of metal parts, movably interconnected in the form of a rocker arm. Thanks to the correct arrangement of the rocker arm elements, the downforce of the wiper is evenly distributed over the glass surface.

Wipers of the famous French company Valeo are widely used by European car manufacturers. Valeo Silencio Performance series brushes are installed on modern BMW, Mercedes-Benz cars. The concern produces inexpensive frame wipers of various models for use on aftermarket cars. The material for making the brushes is characterized by a low coefficient of friction; it is designed for long-term operation in all weather conditions. Valeo wipers move gently on the glass, the working edge of the plate effectively cleans the surface. The brush has a color-coded wear indicator. During operation, the worn edges of the plates gradually change color.

• High-quality windshield cleaning.
• Silent sliding of wipers on the glass surface.
• When the brushes are skewed, scratches from the metal frame elements are not formed on the glass due to the successful design of the plates.
• Durability of products.
• Relatively low price.

• Replacement adapters are not included in the package.

The frame wiper blades of the German concern Twin are among the top best models in this segment of goods. Unlike French wipers, the base of the brush is much thinner here. The elastic working edge perfectly removes snow, ice, road reagents and other dirt in winter, and in hot weather the elastic plate hardly wears out.

• High quality windshield cleaning regardless of the season.
• The brushes clean silently.

• Lack of adapters.
• Too hard edge of wipers wears out quickly.
• Low efficiency of cleaning dry glasses.

Heyner Exclusive frame brushes are the only models that can be installed on any leash when using an adapter (adapter is not included in the delivery set, you will have to buy it separately). The design of the wipers resembles those of Bosch Twin. In order not to purchase a new brush assembly with a frame, worn, disheveled plates are changed separately. When the engine is turned off in winter, it is recommended to put the brushes in the upper position to avoid freezing of the rubber bands. This will protect the surface of the windshield from scratches during self-disassembly of the stuck wiper (the metal mount leaves a deep mark on the surface).

• Acceptable price.
• Availability of purchasing adapters.
• High efficiency regardless of operating conditions.

• Frozen plates often come off the frame.

Best frameless wiper blades

The design of the frameless brushes includes a steel leaf spring inserted into the rubber part. The profile of such a wiper matches the specific windshield. Frameless brushes maintain a given working curvature throughout the entire service life, regardless of the nature of external influences (temperature differences, dynamic loads).

With the correct choice of wipers in the shape of the windshield, the rubber plates are evenly pressed along the entire length of the working part. If the profile does not match, uncleaned areas will form on the glass.

Products of the Japanese company are leading in the ranking of the best models of frameless wipers. Denso Flat Blade brushes are aerodynamically designed to ensure a snug fit of the rubber when driving at speed. The brushes are resilient, the working edges efficiently remove dirt and snow from the surface. The glasses are cleaned without streaking, regardless of the season and ambient temperature.

• Excellent cleaning of windshields.
• All-seasonality.
• Convenience of fastening using the included adapters.

• Relatively short service life.

Brushes from French manufacturers are popular among car owners due to their long service life, elasticity of the working edge in all weather conditions. Unlike the products of other companies, the design of the Valeo Silencio X-TRM frameless wipers provides for special protrusions at the base of the brush, which increase the aerodynamic properties. The cleaning edge is moved closer to the top of the brush. When the machine is running at high speed, the brush guides the liquid upward, blowing the droplets away with the air stream.

• Fast, effective windshield cleaning.
• Wipers work without squeaks, move smoothly even when worn out.

• The high cost of brushes.

The Aerotwin series products reliably adhere to the surfaces of windshields, thanks to the unique design, the contact force increases under the pressure of the headwind. Silicone is used in the manufacture of brushes, this gives the products increased elasticity. The wipers easily slide on the glass without jerking without unpleasant creaking sounds. The best qualities in the operation of Bosch Aerotwin wiper blades are manifested under any operating conditions, including precipitation and sudden changes in ambient temperature.

• The delivery set includes adapters for leashes of various designs.
• The cleaning edge works well at all temperatures.
• The wipers fit snugly against the glass and move silently.

• The plates are not securely attached to the base.

Best Hybrid Grade Wiper Blades

These designs are most popular with car owners. If earlier such wipers were installed only on expensive premium cars, then modern designs are available to buyers in specialized retail outlets.

These products are universal, the structure of the frame ensures a reliable clamping of the brushes to the surface of the car glass, regardless of the degree of curvature and shape of bending. The working edges are protected from excessive contamination by compact protective covers. Hybrid designs are aerodynamic for increased down-pressure.

Denso Hybrid Wiper Blade

Denso series brushes are famous for their high quality; after purchasing these products, not a single motorist was disappointed in his choice. An elastic tape in a metal frame will remove traces of icing from the glass, remove excess water, adhering traces. Elastic material resists rapid wear and tear. Denso Hybrid Wiper Blade wipers are the best solution for winter. The manufacturer produces brushes that differ in length; the delivery set includes adapters that allow you to install wipers on cars of any model.

• Excellent cleansing quality.
• Versatility of use.

• No one noticed the flaws.

Valeo Hybrid FIRST COVERTECH

Wipers produced under this brand are considered the most expensive in their segment. The high price of the product is compensated by the best qualities. The working edge is characterized by high strength, durability, elasticity. The plastic body is aerodynamic and aesthetically pleasing. The universal design of the mounts allows the use of Valeo First Covertech wiper blades on various machines.

• Long service life.
• Silent soft sliding.
• Effective cleaning.
• Operation in any season.

• The cost is prohibitively high.

HEYNER hybrid wipers are made in Germany. Thanks to spare mounts, these brushes are installed on vehicles from different manufacturers. The wiper blades of this brand are of high quality, durability, versatility and other positive properties. The protective casing improves the aerodynamic performance of the wipers, reliably covers the elastic elements from harmful influences (temperature changes, precipitation, road surface chemicals).

• Brushes adhere to the glass on the working surface.
• Glide easily without excessive noise, squeak due to the addition of graphite to the rubber.
• They wash and clean surfaces from snow, ice, dirt, etc.
• The presence of replaceable mounts.
• Affordable price.

• Disadvantages are not noticed.

What wipers are better to buy for a car

The presented rating includes the best wiper blades of various categories. When choosing a suitable product, multiple factors are taken into account: the region of operation of the car, road conditions, climate, financial position of the car owner. According to users, the Heyner Hybrid hybrid brushes are aimed at the average consumer. This model is adapted for glass of any curvature, has a universal mount, fulfills the assigned tasks, tolerates heat and severe frosts. The cost of the wipers of this brand is much lower than their expensive counterparts.
Tings

Before you buy wipers for your car, you should familiarize yourself with their characteristics. To avoid unpleasant situations on the road, you need to see it well, which means that the cleanliness of the windshield must be perfect. And this will help us to achieve high-quality wipers for cars. Moreover, for winter and summer, they should be different. Although many car enthusiasts disregard this rule.

Well-chosen wipers will allow us to provide the necessary visibility through the front and rear windows of the car. Therefore, the process of choosing wipers should be given special attention, because low-quality wipers will not cope with their duties as they should. But few people know how to choose the right wipers, what parameters to pay attention to. In the modern world, we are offered a huge selection of manufacturing firms and it is very difficult to understand the quality and purpose of the goods. Therefore, here are some professional tips on how to choose wipers and not be mistaken.

First, let's figure out how winter wipers differ from summer ones

There is no doubt that there is a difference between winter and summer wipers. Winter wipers are made of rubber, which is much better at handling snow and icing. It remains more elastic when exposed to negative temperatures. All this is due to the fact that the manufacturers of wipers use a special design and composition of rubber, which cope with all of the above problems about once, since the surface of the wiper repels water.

How to choose the right wipers

From what we talked about above, we can conclude that windshield wipers, in relation to weather conditions, are divided into three main types:

• summer, those that are designed to work at freezing temperatures;
• winter ones, those that do their job well in sub-zero temperatures and in snowy weather;
• universal - wipers that are equally good at cleaning glass at any temperature and in all weather conditions, but as a rule, their price "bites".

Summer wipers are made of less elastic rubber. Although at freezing temperatures, you will not feel much difference between winter and summer. Winter wipers are more expensive, so it is not advisable to use them in the summer. For the summer period, you can use cheaper wipers, and for the winter it is better to put frameless ones.

When buying wipers so that they serve as long as possible, you should pay attention to the following things:

• first of all, it is the quality of rubber;
• secondly, the wipers must be of the same length;
• the set must contain mounts suitable for any car;
• and fourthly - an adequate price.

If you do not ignore all the important factors, then purchasing wipers suitable for you, which will last as long as possible and without complaints, becomes not such a difficult matter.

What are the wipers

We have already found out that there are winter, summer and universal wipers, but in addition, they can also, depending on the design, be divided into frameless, frame and hybrid.
To determine which wipers are best suited for your car, and which ones are desirable not to purchase at all, let's look at the most popular types of wipers:

• frameless wipers;
• frame wipers or summer;
• winter wipers;
• hybrid wipers.

Each type differs from each other in the principle of impact on the windshield or rear window, as a rule, the difference is in the pressure. Let's figure out what distinguishes one species from another and what distinguishes these types from each other.

Frameless wipers

The main distinguishing feature of frameless wipers is the absence of hinges in their design, which fail, for example, during icing. They also have good aerodynamics. They don't skew at decent speeds. Such wipers also work quite silently. Another plus is the ease of replacing old rubber bands with new ones. It is cheaper to buy new rubber bands than to buy an entire wiper.

The disadvantages of this type of wiper can be attributed, probably, only the lack of versatility. Such wipers will need to be selected for a specific car brand.

Advantages of frameless wipers in work:

• it is easy to understand when to change the rubber bands, thanks to the presence of an indicator strip, which signals us in advance that a replacement will soon be required;
• due to the low profile of such a brush, visibility increases, and this, you see, is a considerable advantage;
• thanks to their hingeless design, they easily endure snowy winters and icing of glass;
• at speed, the gum is pressed against the glass more strongly due to its aerodynamic properties, which means that the glass will be cleaned better;
• do well with cleaning curved glasses due to uniform pressing force;
• frameless wipers do not have metal elements, and therefore are not sensitive to rust, which also positively affects the appearance;
• such wipers have a beautiful design and look great on the windshield or rear window of a car of any class;
• we repeat. The main advantage is their design, in which there are no hinges that periodically interfere with work.

Cons of frameless wipers

High-quality frameless wipers are in a fairly high price range. If you find such wipers at a low price, as a rule, this means that they are made of low-quality material or there is a fake. Therefore, you should not stop your choice on frameless wipers at a tasty price.

Frame type wipers

These are classic wipers. Typically, these wipers are designed for summer use. They have a very simple design. They consist of curved rocker arms, elastic bands and certain hinged supports. Once upon a time, hinges were made of metal, which was extremely impractical in frosts or in a humid environment, since they did not hold their shape well, the integrity of the structure was violated. And this all reduced the operational period.

Today's frame wipers are equipped with axles and bushings that have plastic components, which makes it easier to clean the mechanism of snow or ice, they do not rust. But, if you want the frame wipers to serve you to the maximum, then use them in the summer, as they do their job perfectly in warm conditions.

In the case of frame wipers, price is of great importance. As a rule, a low price of a product also means low quality. If your windshield wipers do a poor job of cleaning the windows, because of the poor adhesion of the rubber band to the glass, they creak and a crunch is heard - then you can be sure that these are very cheap wipers.

Models from the more expensive category will do a good job of cleaning glass, thanks to the tight fit of the rubber band to the glass, you will not be irritated by squeaks and other extraneous sounds when the brushes work.
But no matter how high-quality and expensive products in a frame design are, they all show themselves poorly in winter, especially when icing.

As a rule, more expensive windshield wipers can last a year or more flawlessly, which cannot be said about budget options.

Advantages of frame wipers

Despite the fact that frame wipers are considered summer, they perform well in severe frosts, if icing is excluded.
They adapt well to different windshield surfaces thanks to the frame.

The presence of a plastic protective cover protects the hinges from dirt and dust.

Due to the fact that the frame is made of metal, they are strong enough (with the exception of some internal elements).
Replacing the rubber band is quite easy.

As with other designs, frame wipers have their drawbacks.

First of all, it is the appearance. After a certain period of operation, frame wipers begin to rust. That, you see, does not look very good.
Over time, the rocker arms wear out, which is why, even with a new cleaning gum, the adhesion to the glass will no longer be the same and you will notice flaws in cleaning the glass.
As mentioned above, they do not like snow and ice.
The biggest drawback, perhaps, can be considered the presence of mechanical hinges, because if they are damaged, then you can forget about the normal operation of the brushes.

Winter windshield wipers

Frame wipers are considered optimal for winter conditions, but they are equipped with special special covers, the task of which is to protect against freezing during snowfalls, thanks to which the mechanism is protected and can function without problems. It is impractical to use such brushes in summer, as this protective cover creates additional resistance. Above 90 km / h, vibration starts and noise is heard.

As with previous types of wipers, the quality of the winter version will also be related to the price. Therefore, in this option, it is better to pay once, but more expensive than often changing cheap brushes that quickly fail.

Hybrid car wipers

Such wipers are characterized by a low frame height, which is their main distinguishing feature from other types. In addition to a small frame, they also have a relatively small casing size. Thanks to these features, hybrid windscreen wipers have good aerodynamics. The wiper's elastic band fits snugly against the glass for excellent cleaning from rain and snow.

Such wipers are purchased, as a rule, for cars with a large glass bulge. They are quite expensive, but they do an excellent job with their duties for a long period of time.

They became popular thanks to the quality materials used in their manufacture. The presence of a high-density insert made of natural rubber makes hybrid wipers resistant to mechanical damage and various atmospheric conditions.

Hybrid wipers do their job well longer than anyone else. They are durable and durable. They can be used at any time of the year and will show excellent results. But for all these advantages, you will undoubtedly have to fork out.

Benefits of hybrid wipers

• the elastic band fits snugly to the glass, thanks to the developed frame;
• the presence of a plastic case protects against adverse weather conditions and other contaminants;
• they are versatile. Suitable for almost any car.

Cons of hybrid wipers

The most important and only disadvantage that can affect the refusal to purchase is their cost!

How to extend the life of your wipers

In order for your wipers to serve you as long as possible, you should adhere to the following rules:

• do not turn on the wipers when the glass is dry or icy;
• it is not recommended to brush off snow with wipers, you can damage the motor. To do this, use a scraper or brush, and at the final stage, you can turn on the wipers;
• in case of frost, in order to protect the rubber bands, the brushes should not be allowed to freeze to the glass. You just have to leave them up;
• do not forget to lubricate the hinges, most often they are the first to suffer;
• timely clean your windscreen wipers from dust and dirt to protect the brushes from rust and the glass from scratches.

Conclusion

Windshield wipers are, at first glance, an insignificant element. But a lot depends on them - after all, a good overview and visibility on the road is a guarantee of your safety and the safety of those around you.Therefore, do not forget to timely service and repair your brushes, and, if necessary, completely replace them.