Is not only a breed of wild horse, which no longer exists on our land. This is what they call domestic cultivators, which are used to cultivate land up to five to twenty acres.
They are popular with users due to their reliability and powerful motors from American and European manufacturers.
About the manufacturer
This model was invented by Tula engineers in 1991, as a simple and reliable replacement for the Rus walk-behind tractor, which was produced by Tulamashzavod.
At first, "Tarpan" was unprofitable, it was not in great demand, but after it was improved and equipped with a productive motor company "Briggs & Stratton" things went much better. Since 97, the cultivators have been launched into mass production.
Today it is manufactured by the specialized company Tarpan, which is a subsidiary of Tulamashzavod, which is located in the historical center - Frolovskaya Sloboda, which is famous for its specialists.
On the land that belongs to a legal entity today, in 79 of the nineteenth century, the Baytsurovsky plant was built, which produced various cast iron and copper products.
Tulamashzavod is a well-known company that specializes in mechanical engineering.
The enterprise includes production facilities that are equipped with new equipment and leading technologies. You can find all the necessary information on the official website tar-pan.ru.
The production includes: procurement shops, electroplating and high temperature processing, production of tools, parts, wood processing.
Along with classical equipment, automatic and semi-automatic devices are used, which allow you to run the program in an interactive mode. This ensures a high technological production flexibility.
To shorten the preparation time, it is often used end-to-end automatic design of elements and equipment(from external indicators to the creation of control programs for machine tools).
For more information about the Tarpan cultivator, see the video:
Popular models
The first motor-cultivator from the Tarpan series with a 6.2 hp two-stroke motor. was released from the assembly line in 93. It immediately established itself on the market on a positive side, but due to some production shortcomings, it was not so popular among farmers.
03
Thanks to the work of engineers, in a few years on the domestic market presented the model "Tarpan-03"... To this day, it does not lose its leading position in the Russian market - up to a thousand of such cultivators are bought every day.
The plant engineers have supplemented the model with various attachments that can be used regardless of the year: for winter, you can use a rotary snow blower, while its coverage will be 75 cm.It throws snow up to 5 meters, you can also purchase an ice breaker to clear the path ...
Regardless of the season with Tarpan cultivators, you can carry out all gardening work using a plow, a rotary cutter (included), a hiller, a flat cutter, a rake to chop and level the soil, collect for weeds and other mounted equipment.
The cultivator can be used as a lawn mower, and in the fall you can dig up roots with it, and prepare the soil for winter.
The service life of the motor is 1000 hours. The centrifugal clutch machine allows you to disassemble the model into several devices, which can be easily transported and stored.
Thanks to the worm gear, it is possible to abandon the unreliable belt and chain drives that are installed on the walk-behind tractor.
Thanks to the improved design of the steering rod, the steering wheel can be turned both in the lying and in the standing plane, thanks to which the operator will walk to the side of the unit, while the loosened soil is not trampled.
Specifications:
- Motor: Briggs and Stratton I / S 6.0 L. With.
- Engine performance: 6.0 HP at 3600 rpm.
- Cylinder volume: 190 cm3.
- Continuous air cooling.
- Runs on manual start.
- There is only one transmission.
- Fuel tank volume: 3.8 liters.
- Engine oil volume: 0.6 l.
- Fuel consumption: 1.5 l / h.
- Capacity: 0.06 ha / h.
- Cutter at maximum speed: 100-120 rpm.
- Cultivation width: 350-700 mm and depth 200 mm.
- Parameters (length / width / height): 130 (76) / 70/106 (75) cm.
- Weight: 45 thousand grams.
- Price: 18 thousand rubles.
Detailed video about this model.
Realizing that he is confident to conduct and develop business in the conditions of the modern market, which is constantly changing, it is necessary to produce high-quality, competitive, reliable and affordable equipment, the manufacturer annually updates its model range produced from the conveyors.
031, 04, 07
In recent years, along with the basic models, the 031, 04, 07 model of motor cultivators has been produced.
Specifications:
- Motor power: 5 HP
- Motor type: single-cylinder 4-stroke, top-type shaft.
- Clutch type: automatic, centrifugal, dry.
- This cultivator "Tarpan" is a worm and single-stage reducer device.
- Gears: 1, forward.
- Hot mix: gasoline.
- Clutch: centrifugal clutch.
- Working width and depth: 360 x 200 mm.
- Weight 28 thousand grams.
- Price: 11 thousand rubles.
04
Compact model for a medium-sized plot, as well as equipped with a pair of wheels so that the cultivator moves during work and the opener, thanks to which the depth of the cutter is regulated.
"Tarpan-04" is very easy to operate, it has only one throttle lever and a "Stop" button.
The main highlight of this model is a relatively efficient motor for mid-range areas. Thanks to this motor, as well as the low cutter speed (100-120 rpm), the model ideally digs the soil onto the "shovel bayonet".
Productive and affordable affordable price segment.
Specifications:
- Motor: Briggs & Stratton (USA).
- Engine type: single-cylinder, 4-stroke carburetor type.
- Performance: 6.0
- Powered by: gasoline.
- One gear, no reverse.
- Weight, gr: 45 thousand
- Max. processing depth, cm: 20.
- Parameters, cm: 135 x 60 x 110.
- Price: 26 thousand rubles.
07-01
Manual
It is important not to use the unit at full capacity for several days after the purchase - it must be remembered that the device must be run-in for the first 24 hours. Therefore, it is better to process the same bed in several stages, and each time increase the depth of processing.
Start
Before the start is check the oil level, serviceability of the engine, is the power unit securely fixed with another unit that performs an additional function.
It is prohibited to start the engine when the control lever is clamped (the position of the engine speed governor is "fast"), because the clutch of the device works automatically when the engine reaches the required speed, which is more than idle speed.
Soil treatment
It is necessary to stand near the steering wheel and hold the handle firmly. Do not press hard on the lever, slightly increase the number of revolutions of the motor.
When the motor reaches the required speed, the centrifugal clutch will automatically engage and the gearbox shaft will begin to turn.
At this time, the device will begin to move. Deep soil processing with milling cutters is determined by the position of the depth regulator, which can change when rearranging it in the bracket along the holes that are in the regulator.
Turn off device
To do this, lower the control lever. It will return to its original idle position by itself as a result of the return spring. Then pull it down all the way and the motor will stop running.
Malfunctions and repairs
"Tarpan" cultivator, the operating instructions indicate some of the causes of breakdowns. Motor impossible to run or is difficult. This may be due to a knocked-down setting of the engine speed regulator, or fuel is not supplied to the carburetor.
To eliminate this malfunction, you need:
- Check the presence of fuel in the tank.
- Check spark plug gap.
- If necessary, clean the spark plug from carbon deposits or replace it.
- Check the correct operation of the carburetor.
The motor may also become warm.
It starts to overheat because the cooling system and air filter are clogged.
To keep the engine running at normal temperature, the cooling system and air filter must be cleaned or replaced.
The engine does not run at maximum rpm. This is often due to the fact that air filters clogged and must be replaced. To eliminate this problem, you must clean or replace the filter.
Malfunctions often happen due to the fault of the operator due to the irrational use of equipment, therefore, before starting work, be sure to read the instructions. If you have not saved the original, you can find it on the Internet, in one of the search engines write: "Tarpan cultivator instruction manual."
The Tarpan model range is constantly updated and improved in terms of its technical characteristics.
Conclusion
The main feature of cultivators is quite efficient motor, in comparison with other models of this kind. The only drawback of the lineup: there is no reverse gear.
People who grow crops on the site almost always use it.
The invention relates to the field of mechanical engineering, more specifically to small-sized agricultural machinery, but can be used in other fields of technology, where a connection of rotating shafts is required. The automatic centrifugal clutch of the cultivator includes two brake pads fixed through bearings on the motor shaft, contacting with the transmission during shaft rotation and tightened together by springs fixed in holes that are located symmetrically relative to the engine shaft. The novelty is that each brake pad is equipped with at least one additional hole with the ability to fix the springs in any of the holes, and the additional holes are located in such a way that one position of the spring is perpendicular to the line connecting the bearing and the most distant point of contact of the brake shoe. The technical result is to increase the efficiency of the clutch and the possibility of using it with various types of engines and actuators. 6 ill.
The invention relates to the field of agricultural machinery, in particular small-sized, designed for processing small-contour areas by milling and other work on the automation of manual labor.
Known motor-cultivator "Tarpan-03", which has an automatic centrifugal clutch, including fixed through bearings on the motor shaft brake pads, tightened together by springs. The pads are in contact with the transmission when the shaft rotates, transmitting torque from the engine. The springs are fixed in holes located symmetrically with respect to the motor shaft. Tillage cutters are installed on the output shaft (000 "Tarpan", Motor-cultivator "Tarpan", model TMZ - MK - 03, Operation manual, 093 300 000 OM. P.4, 15).
The disadvantages of the known device is the lack of adjustment of the transmitted moment depending on the wear of the pads and the stretching of the springs; the inability to replace engines with different numbers of initial revolutions on a motor-cultivator; the impossibility of connecting attachments or implements to the clutch, for the operation of which a torque of a different magnitude is needed; a small spring resource due to the presence of an additional bending moment.
The task of the proposed technical solution is to adapt the cultivator to different types of engines and different actuators.
The task is achieved by the fact that the automatic centrifugal clutch of the cultivator, which includes brake pads fixed through bearings on the motor shaft, contacting with the transmission during shaft rotation and tightened between themselves by springs fixed in holes that are located symmetrically relative to the engine shaft, each brake shoe is equipped with at least at least one additional hole with the ability to fix the springs in any of the holes, and the additional holes are located in such a way that one position of the spring is perpendicular to the line connecting the bearing and the most distant point of contact of the brake shoe.
Thus, this will increase the clutch life by adjusting the transmitted torque depending on the wear of the brake pads and the stretching of the springs; apply and replace one with another engines with different numbers of initial revolutions; connect attachments to the engine for performing various agricultural operations by setting the springs of four different clutch actuation points; increase the service life due to the installation of axial loading and the elimination of the additional bending moment of the springs.
The claimed technical solution is illustrated by drawings, where figure 1 shows a motor cultivator complete with cutters; figure 2 shows a cultivator complete with a plow and propellers (arrows show the direction of movement of cutters and propellers); Figures 3, 4, 5 and 6 show a section A-A in the area of the centrifugal clutch - these figures show four options for installing the springs.
A motor-cultivator consists of an engine 1 (Figs. 1, 2), a transmission 2 (Figs. 3-6), on the executive shaft 3 of which soil-cultivating cutters 4 (Fig. 1) or propellers 5 (Fig. 2) are installed. Complete with propellers 5, the plow 7 is attached to the body 6 of the transmission 2. The engine 1 and the body 6 of the transmission are interconnected with cap screws 8.
The automatic centrifugal clutch of the cultivator includes brake pads, consisting of friction linings 9 and pads 10. The pads 10 can be rotated on bearings 11 installed through a leash 12 on the motor shaft 13. A gap is made between the transmission 2 and the friction linings 9. The pads 10 are pulled together by springs 14 installed in holes 15 (Fig. 5) or in additional holes 16 located closer to the engine shaft (Fig. 3), or alternately in the main and additional holes (Figs. 4, 6). The choice of the method of installation of the springs depends on the torque transmitted by the clutch. The moments tightening the brake pads with springs 14 are different. Figures 3, 5 show different arms of application of forces relative to the bearings 11. In the variants shown in Figs. 4 and 6, the pre-tension of the springs is higher than in the variants of Figs. 3 and 5. The axes of the springs 14 shown in Fig. 4 are perpendicular the line connecting the bearing axes 11 and the contact point 17 farthest from the bearing on the friction lining 9. Instead of transmission 2, another actuator can be connected to the engine 1, which requires a different torque value: a lawn mower, a trolley, a feed crusher, a water pump, etc. .d.
The device works as follows. When turned on, the engine 1 rotates the shaft 13 through the leash 12 of the brake pads. The friction pads 9 do not come into contact with the transmission, since the moment tightening the pads 10 is higher than the centrifugal force generated by the engine during rotation. If the engine has a high initial number of revolutions, then in order to prevent spontaneous engagement of the transmission, the clutch torque of the pads 10 is increased by setting the springs 14 to the position shown in Fig. 6. If the engine 1 breaks down, it can be replaced with an engine with a different initial speed, while moving the springs 14 to a different position. The operator increases the number of revolutions of the engine 1, while the torque pulling the pads 10 becomes lower than the centrifugal force from the rotation of the engine 1. The pads 10 rotate in the bearings 11 and the friction linings 9 contact the transmission 2, transmitting the torque to the tillage cutters 4 or to the propellers 5 or to another executive body. The largest moment is transmitted by the springs 14 with the smallest clutch moment of the brake pads. The greatest force of the pads 10 is transmitted at the point 17 of contact of the friction lining 9, since this point is the farthest from the bearing 11. After the service life is reached, the section in the region of point 17 wears out more, the stroke of the spring 14 increases and the transmitting moment decreases. In this case, the springs 14 are moved to the position shown in Fig. 3, thereby increasing the transmitting moment. If the springs are stretched during operation, the transmitting moment decreases, the springs are rearranged to the position shown in Figs. 4, 6. During operation of the springs fixed as shown in Fig. 6, their service life increases due to the elimination of an additional bending moment (spring located perpendicular to the shoulder). To install another actuator, unscrew and raise the swing bolts 8, remove the transmission 1, install another unit, lower and tighten the swing bolts 8.
Automatic centrifugal clutch of a motor-cultivator, which includes two brake pads fixed through bearings on the motor shaft, contacting during rotation of the shaft with the transmission and tightened together by springs fixed in holes that are located symmetrically relative to the engine shaft, characterized in that each brake shoe is equipped with at least one additional hole with the ability to fix the springs in any of the holes, and the additional holes are located in such a way that one position of the spring is perpendicular to the line connecting the bearing and the most distant point of contact of the brake shoe.
Motor-cultivator Tarpan can be attributed to the middle class, single-operation, having one speed. It is equipped with a B&S 6 hp engine. Adjustable cutter grip 35/70/100 cm. Worm gearbox and automatic centrifugal clutch are also installed. The weight of the walk-behind tractor is 45 kg. It does not provide reverse gear and power take-off.
Is it worth buying a Tarpan motor cultivator
Two wheels are installed for rolling the walk-behind tractor. And in order to regulate the depth of the cutter, a coulter is installed. The walk-behind tractor itself can be easily disassembled into two parts. The casters and handles are removable. This makes it easy to fit into the trunk of a car.
The main feature of Tarpan is a rather powerful engine, in comparison with other cultivators of this class. Unfortunately, the designers did not provide for a reverse gear, which is a big disadvantage. The worm gear of the gearbox was installed in a fairly robust housing.
Unfortunately, it does not have a reverse stroke due to the large gear ratio. When processing heavily planted areas, it is quite often necessary to pull out the cultivator in reverse. This usually occurs in places where a reversal is not possible.
In this case, the cutter does not turn back, it skips and unfolds what has just been loosened. It is for this reason that gearboxes with toothed wheels or with chain drives are installed in modern cultivators. If a worm gear is installed, then only with reverse gear.
Therefore, Tarpan is very convenient for the owners of open gardens, and for those who will prepare the soil for further processing and sowing. In this case, there is no great need for the convenience of controlling the walk-behind tractor in reverse gear.
Clutch and speed of the Tarpan motor-cultivator
The following design features of the cultivator are an automatic centrifugal clutch and a split "leg". This allows it to be disassembled into two parts and folded into the trunk of the car, which is a definite plus. On the other hand, due to this feature, the clutch "often flies out" when working with a hiller, plow, digger. If you use an automatic clutch, it has a large response inertia, which is unsafe.
To turn on the speed, to start the cutter, you need to turn the throttle lever. This will increase the RPM, after which the cutter begins to rotate. If it is necessary to stop the cutter urgently, the operator must remove the gas. This will not immediately turn off the cutter, and it will continue to run for a while. In this case, you need to use the "Stop" button.
Also, in the structure of the motor-cultivator, a new design of the steering rod is used, which allows it to be turned 360 degrees and to adjust the angle of inclination. This allows the operator to walk close to the cultivator and not on cut furrows or loosened soil.
If you install additional equipment on the Tarpan motor-cultivator, then it will be able to weed, huddle, harrow, loosen, mill, etc.
Motor-cultivator Tarpan reviews
Vladimir, a resident of Belgorod, uses the Tarpan Motor-Cultivator at his summer cottage:
I have been using Tarpan for 9 years. The positive overall experience is primarily due to the engine. Advantages of a motor-cultivator: it always starts from a half-turn; since there is a four-stroke engine, there is no need to oil the oil, just poured gasoline and change it a few times a year; easily fits into the trunk of any car, because it can be disassembled into two halves. Disadvantages of Tarpan: the gas is made very inconveniently - under the thumb of the right hand. He gets tired quickly.
Feedback from Sergey, a resident of Omsk, uses the Tarpan Motor-Cultivator on his site:
With its light weight (48 kg) and "monstrous" excess power, it is difficult to take the virgin soil. If you first use a tractor plow that will break the roots, the lumps will be dealt with quickly and easily. Due to the peculiarity of the design, the reverse is not installed. But with its light weight, it can be deployed manually without any problems. I saw how a cart was dragged with a converted Tarpan. The plow does not pull because it is lightweight. And at the same time, it perfectly cuts the beds with a hiller on cutters. Excellent material from which the cutters were made.
Review of Andrey Ivanovich, a resident of Rostov, uses the Tarpan motor-cultivator in a greenhouse:
I sharpened them once after buying them, and never touched them again. Basically I use a hiller and cutters - I will cut the beds, plow and that's it. Needed is negligible gasoline: a 1.5-liter tank is enough for an hour of operation. The first time I took off the cutter cover, because it only got in the way, because a lot of grass is wound around the cutters. I also hung a 20 kg weight in front, thanks to which the virgin soil was taken much better. But she dangled in front and rocked the cultivator.
In general, if used for summer cottage work with a minimum of settings and hemorrhoids, this is quite a convenient thing. Also, do not forget that, first of all, the task of the cultivator is to loosen the soil, which he does just fine. Therefore, only cutters are included with it. 
Feedback from Roman Viktorovich, a resident of Kharkov, uses the Tarpan Motor-Cultivator at the dacha:
I have been working with Tarpan since 2004. Very satisfied. If, when working on heavy ground, he begins to jump and tries to run away, then first you need to remove and sharpen the knives. It is advisable to attach a load. Made a load of lead (melted old batteries). The result is a weight of 13 kg, has a compact volume and allows you to work perfectly. Also can be made in the form of several plates to adjust the weight. I use the load for digging trenches, virgin lands and primary plowing. Then I shoot and it works great.
Alexey, a resident of Kharkov, uses Tarpan on his personal plot:
Recently acquired by Tarpan. Yesterday I went through the garden with cutters. Feelings: the engine runs vibration-free and quiet; the cultivator is a little light, sometimes it jumps; perfectly cultivated the second time when turned the horns, no trace left. Processed seven acres. It took two hours and three liters of gasoline.
Vladimir Ivanovich, a resident of Belgorod, uses a motor-cultivator in the country:
The load on the back and arms is acceptable. In addition to milling cutters, I did not test attachments. The cutters have to be cleaned because they wind up the roots a lot. But I think that this is a plus, since weeds are removed from the garden. If the cutters are sharp, it will chop up the roots, after which weeds will multiply.
Motor-cultivator Tarpan video compilation
Plow for motor-cultivator Tarpan
For its manufacture of the plow for the Tarpan motor-cultivator, high-strength special steel was used to withstand heavy loads. Its purpose is to plow the soil with a set of lugs, thanks to which the required tractive effort is created.
The use of a plow is possible for the initial tillage. To loosen large clods of soil, cultivation is necessary.
Related Posts:
How to make a homemade electric cultivator, photo, video
Do-it-yourself cultivator
What should be a cultivator for a summer residence, and what to look forThe Tarpan motor-cultivator is a universal small-sized unit designed for mechanization of heavy physical labor for tillage in household plots.
Motor-cultivators Tarpan are manufactured in the city of Tula at the Tulamashzavod plant.
A distinctive feature of a motor-cultivator is the ability to disassemble it into two parts and fit in the trunk of most sedans.
The MK can be transported by disconnecting the power unit 1 (see the figure below) from the executive unit 2. For this, it is necessary to release the swing bolts 3. When transporting the MK, it is necessary to lay it in such a way as to prevent oil from spilling out of the gearbox (through the hole in the filler plug), from the crankcase and residues, fuel from the fuel tank.
Technical characteristics of the cultivator Tarpan MK-03 with the engine honda, briggs stratton
| Main settings | Meaning | |
| Overall dimensions, mm, no more (control handles folded) | length 1300 (760) width 700 height 1060 (760) | |
| Weight, kg | 45 | |
| Tillage width, mm | 560 | |
| Cultivator cutter diameter, mm | 320 | |
| Productivity, ha / h (with normal soil and a loosening depth of 180 mm) | 0,06 | |
| Ripping depth max., Mm | 200 | |
| Limit angles of inclination during operation, degrees, longitudinal and transverse, no more | 15 | |
| Engine | briggs stratton | honda |
| Model | 12j802 | GCV-160 |
| A type | 4-stroke, carburetor | |
| Working volume, cubic meters cm. | 190 | 160 |
| Max. power, hp, not less | 5,5 | 5.5 |
| Fuel tank capacity, l | 1,1 | |
| Filled oil volume, l | 0,6 | 0,55 |
| Fuel and oil in accordance with the "Engine manual" | ||
| Fuel consumption per hour, l / h, not more | 1,1 | |
| Clutch | Dry automatic centrifugal | |
| Start | Manual action | |
| Shutdown | Remote Throttle Lever | |
| Reducer | Single stage worm gear | |
| Oil for lubrication of worm gear - TAD-17I GOST 23652-79. Allowable replacement - gear oils of SAE 90, SAE 75W / 90 grades, API GL-4, GL-5 categories | ||
| Oil volume in the gearbox, l | 0,35 | |
| Sound level at the operator's workplace, no more dBA | 81 | |
| Correction level of vibration velocity on the control handle, no more than dB | 118 | |
| Number of speeds | 1 forward |
MK "Tarpan" is equipped with a Briggs & Stratton engine, model 12j802, or a Honda engine, model GCV-160.
- 4-stroke, carburetor:
- working volume: Briggs & Stratton - 190 cm3; Honda - 160 cm3
- maximum power not less than 5.5 hp.
What fuel and oil to pour into the Tarpan cultivator can be found in the user manual for the engine or from the table given in the instructions.
Honda GCV-160 engine user manual download
Briggs stratton 12j802 engine- user manual + download parts catalog (useful when ordering spare parts).
Producer of Tarpan cultivators - LLC "Tarpan", Tula, official website - www.tulamash.ru/static/tarpan/history.html
Motor-cultivator Tarpan - instruction manual download
Tillage operations are carried out using the MK working body - a rotary cultivator. During rotation, the cultivator cutters cut off the soil layers, crush and mix them, while simultaneously causing the forward movement of the MK.
The advantage of a rotary cultivator in comparison with a plow is the better loosening of the soil, crushing and incorporation of weeds, as well as uniform mixing of organic and mineral fertilizers with the soil throughout the entire depth of processing.
MK "Tarpan" consists of the following main parts (Fig. 1);
- power unit including engine, docking device, centrifugal clutch, steering
- an executive unit that includes a worm gear, a left rotary cultivator, a right rotary cultivator, a depth adjuster, a bracket, a protective cover.
To expand the functional capabilities of the motor-cultivator, additional attachments and accessories have been developed and supplied separately, with the help of which the MK can perform hilling, cutting furrows, weeding row spacings and other types of work.
Cultivator Tarpan - attachments
| Lawn mower Designed for cutting lawns and lawns to a predetermined height. It is installed instead of the executive unit and is connected to the power unit. | |
| The Struna mower with a working width of 0.6 m is designed for mowing grass and weeds both in open areas and in hard-to-reach places near trees, curbs, fences. With a cutting head rotation frequency of 3800 to 4600 rpm. the grass is easily trimmed and thrown to the side. Instead of knives, the mower uses a polypropylene bristle string. Easily disassembled into a power unit and a working body, the mower is freely transported in the trunk of a car. | Mower "String" |
| The hiller is used with MK "Tarpan-03, 04" and with MB "Tarpan-07" consists of a frame and dumps adjustable by means of a strip with holes. It is used for hilling vegetable crops, cutting ridges and furrows, filling furrows. The hiller must be used in combination with weeders that create the required pulling force. | |
| Weeders are used with MK "Tarpan-03, 04" and with MB "Tarpan-07"; they consist of lugs and knives fixed on the hub, designed for weeding row spacings and loosening the soil. The minimum width of the weeded strip is 350 mm. Weeders are installed on the MK gearbox output shaft instead of rotary cultivators. | |
| During rotation, the cultivator cutters cut off the soil layers, crush and mix them, while simultaneously causing the forward movement of the MK. | |
| Grousers 260x80 used with MK "Tarpan-03, 04" | |
| Transport frame with wheels is used with MK "Tarpan-03, 04" | |
| The protective disk is used with MK "Tarpan-03, 04" and with MB "Tarpan-07" | |
| The "Crow's Feet" cutter is used with MK "Tarpan-03, 04" | |
| Connecting sleeves |
Design and operation
The principle of operation of the MK: from the engine through the gearbox, the MK shaft is driven into rotation, on which the tillage cutters of the rotary cultivator are installed. Rotary cutters loosen the top layer of the soil and at the same time move the MK forward. The design of the MK makes it possible to quickly separate the power unit 1 from the executive unit 2. For this, it is necessary to release the swing bolts 3.
The power unit (Fig. 2) includes a block with a 4-stroke engine 1, a docking device 2, a clutch 3 and a steering 4
ENGINE. Engine design - see Engine Operation Manual.
STEERING CONTROL allows you to adjust the position of the handles in the vertical and horizontal planes, which makes it possible, with the steering wheel turned horizontally, to process the beds without trampling the soil. For ease of transportation (reduction in size), the steering wheel must be turned towards the engine.
The engine remote control unit (Fig. 7) allows you to change the engine speed with the control lever 2 and stop the engine by pushing the lever down to the stop.
The centrifugal clutch (Fig. 4) transfers the engine torque to the gearbox when the engine reaches the required speed.
The clutch provides MK a shock-free start.
ATTENTION! To avoid damage to clutch parts, do not start the engine while the power unit is not connected to a gearbox or other working unit.
The reducer (Fig. 5) is single-stage, worm gear, with an oil bath. The gearbox housing has lugs with holes that serve for the installation of a transport device and other attachments.
Rotary cultivator (fig. 6)
Cultivators 1, 2 - left and right - are installed on the gearbox shaft and fastened with axles with clamps.
Tillage:
- Get behind the wheel and grasp the handles firmly;
- slowly press the engine speed governor control lever, smoothly increase the engine speed;
- after the engine has reached the required speed, the centrifugal clutch is automatically triggered, the gearbox shaft begins to rotate, and the MK starts to move. The depth of tillage with the rotary cultivator cutters is determined by the position of the depth regulator, which can be changed by rearranging it in the bracket along the holes in the regulator.
The cutters are buried in the ground by pressing the steering. In this case, the depth adjuster is deepened into the ground, and the forward speed is reduced. The deeper the regulator enters the ground, the lower the speed of movement of the MK and the greater the depth of processing. If the MK does not move forward, and the cutters are buried in the ground, lift it behind the steering wheel.
If the MK leads to the side of the treated area, the working MK should be shifted in the opposite direction. MK turns must be done by tilting it to the right or left. ATTENTION! Observe the distance between the machine provided by the length of the handlebar.
When cornering, do not pull the MK towards you, but, on the contrary, push it away. When working on loose (loose) soil, make sure that the cutters do not go all the way into the soil, overloading the engine.
On heavy sites, cultivate in several stages, in layers, each time increasing the depth of cultivation, thereby ensuring good crushing of soil clods and its uniform structure. Before treating areas with high vegetation, vegetation must be mowed and removed.
When processing areas with plant residues, they are wound onto the cutters of the MK rotary cultivator.
Clean the cutters periodically. To reduce the winding of plant residues on cutters, you can use saber-shaped knives used on MK "Krot", "Salyut". In the process of MK operation, the knives of rotary cultivators become dull, which worsens their penetration into the soil, reduces the depth of processing per pass, and reduces productivity. Sharpen the knives as needed.
Maintenance of the Tarpan cultivator
Hourly and calendar services must be respected, whichever comes first. In case of severe operating conditions of the MK, it is necessary to carry out maintenance more often.
Perform engine maintenance in accordance with the “Engine Operation Manual”.
Types and frequency of maintenance
After the first 5 hours of operation - change the oil in the gearbox.
Every 5 hours or daily - cleaning and wiping the MK.
Checking the tightness of the joints of engine parts for oil and fuel leaks. Fastening control. Checking the oil level in the gearbox.
Every 25 hours. or every season - checking and cleaning the clutch.
Every 100 hours or every year - change the oil in the gearbox, lubricate the control rod and control unit.
Cultivator Tarpan
Reducer
Power block - bottom view
View assembled with handles folded
Type of cultivator without engine
Source: https://pahalka.ru/kultivatory/kultivator-tarpan-mk-03
Motor-cultivators Tarpan - models, their characteristics, video
The Tula Machine-Building Plant produced Tarpan cultivators in 1991. The first models were equipped with domestic low-power engines, so they did not arouse much interest among farmers. In 1997, cars with American four-stroke engines appeared on the market. The demand for equipment began to increase, the owners were able to appreciate it.
Tarpan cultivators are operated on an area of up to 15 acres. A well thought-out design and good technical performance have made them competitive.
Advantages of the Tarpan technique
Tarpan machines have been on the market for about 25 years. Positive feedback from the owners confirms that the units have numerous positive characteristics:
- It can be disassembled into two parts. This makes transportation much easier;
- A high-quality engine and robust elements combine well, ensuring the ability to work even on difficult soils;
- High speed of plowing a land plot - about 2 ares per hour;
- Motor in vertical position can be easily removed;
- The ability to use various attachments;
- The minimum number of settings. The unit is easy to operate. No need for regular maintenance;
- Light weight and compactness. The motor-cultivator easily turns in any direction. The assembled unit takes up a minimum of space. Disassembled fits even in the trunk of a car.
There are certain design flaws:
- The cutters are located at right angles, therefore they quickly clog;
- Lack of reverse speed;
- Before changing the engine oil, the clutch is removed and the fasteners are unscrewed.
Specificity of Tarpan motor cultivators
All systems and assemblies of motor cultivators are well thought out, therefore reliable and durable. The manufacturer sought to create a universal technique for solving various agricultural tasks.
Features of Tarpan technique:
- Almost all units with a Briggs & Stratton engine, the power of which is 5 - 6 hp. With.;
- One or two speed transmission;
- Air cooling protects the power plant from overheating and reduces the number of breakdowns;
- Improved grip with reliable spark plugs;
- Worm gear. It is more reliable than a belt or chain drive. The mechanism works with it for a long time without replacing this element;
- Plowing is carried out at a depth of 16 - 25 centimeters;
- Surface coverage 25 - 100 centimeters;
- Two pneumatic wheels for easy transportation;
- The handles are height adjustable to suit the operator's height;
- Handles with rubber pads are comfortable, the angle of inclination of the steering rod is adjustable;
- Replacement of spare parts in case of malfunction. These can be purchased from a specialist store at an affordable price.
Engines for motor-cultivators Tarpan, four-stroke, single-cylinder:
- Champion... American motor with a capacity of 5.5 liters. With. The efficiency of 0.06 ha / hour is ensured;
- Briggs & Stratton. Power in the range of 5.5-6 liters. sec., productivity reaches 0.06 hectares / hour;
- Honda... The engine is considered the most reliable. Power up to 5.5 liters. With.
Excellent parameters make the equipment durable and maintainable.
The TMZ-MK 03 model is in great demand. Thanks to the modular design, the equipment can be stored in a summer cottage and transported in the trunk of a car. Not only canopies are removed, but also the power plant.
Feature overview:
- Engine displacement - 190 cm3;
- Number of cutters - four pieces;
- Capture width - 35, 70, 100 centimeters;
- Unit weight - 45 kilograms.
Tarpan TMZ-MK 03 is supplemented with various attachments:
- Plow;
- Rake
- Hiller;
- Lawn mower;
- Rotary cutter.
Working with attachments is easier due to the compact size and handles that are adjustable to the operator.
The proposed video will allow you to get acquainted with the structural characteristics and the specifics of the operation of the unit.
Motor-cultivator Tarpan TMZ-MK 04
The gasoline cultivator Tarpan loosens normal and heavy clay soils, introduces fertilizers, removes weeds. The machine has a high traction force and good cross-country ability thanks to the installed power plant from an American manufacturer.
A worm gearbox and an automatic centrifugal clutch allow the unit to be operated regardless of conditions.
Technical specifications:
- Four-stroke gasoline engine with a capacity of 6 liters. With.;
- Engine displacement - 190 cm3;
- Gearbox - 1 forward speed;
- The number of cutters (crow's feet) - four pieces;
- Plowing width - 56 centimeters;
- Cultivation depth - 20 centimeters;
- Weight - 43 kilograms.
Tarpan electric cultivators are also worth attention. They are powered by a 220W electric power plant. Email the Tarpan cultivator has a slightly lower power than the gasoline model. But the soil treatment parameters and design features are no different.
When operating the equipment, it is important to study the operating instructions. Relying on it, service and maintenance of the unit is carried out.
Source: http://pro-traktor.ru/motokultivatory/tarpan.html
Cultivator Tarpan - model range and technical parameters
Cultivator Tarpan
LLC "Tarpan" - a subsidiary of the production association "Tulamashzavod", designs, produces and sells mini agricultural machinery for various purposes.
Cultivators "Tarpan" are affordable, well-assembled, equipped with reliable power plants supplied by companies from the USA, Japan and China.
The principle of operation and description of the Tarpan motor-cultivator
The torque from the gas engine through the clutch mechanism and the worm gear is transmitted to the shaft of the working cutters, which rotate, loosen the soil layer and move the unit along the strip.
The product belongs to the middle class of cultivators, processes any soil density, including heavy ones, on plots up to 20 acres.
Sufficient power of the power plant, the ability to process a working strip up to 1 m wide, a set of additional attachments make the device a productive and multifunctional assistant to the owner of the land plot.
For convenient transportation, the machine can be quickly divided into blocks:
- Energy, which includes:
- engine;
- clutch mechanism;
- docking station;
- steering.
- Executive, consisting of:
- worm gear;
- right and left rotary cultivators (working cutters);
- loosening depth regulator;
- mounting bracket;
- protective casing.
Most models use four-stroke, vertical crankshaft petrol engines from B&S or Honda. Units with the Chinese Champion engine are offered for a lower cost.
The clutch device is assembled according to the friction scheme, automatic type. The mechanism smoothly engages to transmit torque with an increase in the number of revolutions of the engine shaft.
The lineup
Four modifications of Tarpan cultivators enter the market of garden machinery:
- TMZ-MK-03 and TMZ-MK-04 are middle class devices, differ in the gear ratio of the worm gear;
- TMZ-MK-031 - light class cultivator for working on developed areas;
- TMZ-KE-07-2,2 machine with an electric asynchronous motor powered from a stationary network.
Depending on the manufacturer of the power plant, the product names after the digital index include the designation: B&S, Honda, Champion.
Electric cultivator Tarpan TMZ-KE-07-2.2
Technical specifications
| Parameter | Unit rev. | Indicator | |||
| Cultivator TMZ-MK | |||||
| 03 | 031 | 04 | CE 07-2.2 electric | ||
| Loosening depth | m | 0,2 | 0,14 | 0,2 | -/- |
| Cultivating band width: | m | 0,70,351 | 0,5 | 0,70,351 | 0,35-0,7 |
| - cutters | |||||
| - pololniki | |||||
| - cutters and weeders | |||||
| Production | ha / hour | 0,06 | 0,01 | 0,08 | 0,05 |
| Milling cutters installed on diameter | PC. mm | 2 × 2320 | -/-240 | -/-320 | -/—/- |
| Weight of the machine prepared for work | kg. | 45 | 28 | 47 | 45 |
| Power | lc. | 6,0 | 3,5 | 6,5 | 2.2 kW |
| Fuel | Gasoline A-92 | electrical network 220V, 50Hz | |||
| Clutch unit | dry design, automatic centrifugal mechanism | ||||
| Reduction gear | one stage, worm type |
Operating instructions - / - * - the value corresponds to the parameter of the previous cell on the left
During the first 12 hours of operation, the cultivator runs in. Avoid excessive loads on the actuators and the power unit.
- Starting and stopping the motor:
- set the fuel supply regulator to the "Idle" position;
- press the cold start button 3 times;
- take out the slack on the kick starter cord and pull it out to its full length with a sharp movement;
- continue the actions until the engine starts;
- to stop the engine, the fuel control lever is moved to the extreme left position.
- Tillage:
- holding the cultivator by the steering handles;
- add engine speed, the automatic clutch mechanism will work, the cutters begin to rotate loosening the soil and moving the unit.
- Crop depth and width:
- determined by rearranging the opener on a multi-hole bracket;
- the deepening of the working cutters is carried out by pressing the steering handles, the deeper the executive body is, the slower the cultivator moves;
- turns are carried out by tilting the unit to the left or right, the reverse of the movement is not provided for by the design;
- the width of the working band is regulated by shifting and adding the number of working cutters.
Attachments
To expand the number of operations in which the Tarpan cultivator can be used, the manufacturer offers to additionally purchase attachments:
- Hiller for processing vegetable crops, cutting, filling furrows and ridges. Installed instead of the depth regulator (opener).
- A set of pololniks used with a hiller. The device consists of lugs and knives fixed on an axle. Loosens and plows the soil between rows. Installed instead of working cutters.
- Protective discs to avoid damage to plants when processing row spacings. Installed on the hubs of cutters or weeders.
- The lawn mower is installed in place of the executive unit.
Accessories sold separately include: a transport device for moving the unit around the site; universal connecting bracket, shaft extension sleeves for installing a third pair of cutters.
Attachments of the Tarpan cultivator
Possible malfunctions and repairs on our own
| № | Malfunctions, damages and failures | Cause of occurrence | Your actions |
| 1 | Engine won't start | the speed regulator is not tuned; no fuel is supplied; the operation of the ignition system is disrupted | check the position of the carburetor flap; no fuel, press the suction button 3 times, clean the filter and carburetor; check the gap and clean the plug, replace the plug |
| 2 | Overheating of the engine | air filter clogged; cylinder jacket dirty | clean or replace the filter element; clean the cylinder jacket |
| 3 | The engine does not develop revs | clogged air filter | clean or replace the filter element |
| 4 | The output shaft of the cutters does not rotate | low revs; faulty clutch | increase the number of revolutions; wipe dry the drum and friction pads of the clutch |
| 5 | The shaft of the working cutters rotates at idle speed of the engine | faulty clutch | replace stretched or destroyed friction pad springs |
| 6 | Oil leakage along the gearbox shaft | damaged shaft seals | replace the cuffs. |
The owner of the cultivator will help the owner of the cultivator find the necessary spare part, perform service maintenance and repair the equipment in 70 representative offices of Tarpan LLC operating in all federal districts of Russia.
TELL YOUR FRIENDS
Source: http://mastertraktor.ru/selxoztexnika/pochvoobrabotka/kultivator-tarpan.html
Motor-cultivator Tarpan - pros and cons, model overview
Today, tarpan is called not only unbridled wild horses that previously existed on our planet. This name was given to domestic motor-cultivators, which are intended for plowing areas up to 15 acres. They feature a reliable, powerful engine, high quality parts and excellent performance.
Advantages and disadvantages of Tarpan cultivators
The Tarpan cultivator has more than 25 years of history. The first models of the family of aggregates were not very reliable, so they wanted to abandon their production.
However, over time, the bulk manufacturer introduced more advanced technologies into production, due to which the design of the models was constantly improved.
Modern representatives with a Honda engine are distinguished by their high reliability. They are supplied with a practically perpetual worm-type gearbox.
The powerful motor is also able to delight buyers. In the current configurations, the Tarpan cultivator is produced with 5.5 and 6 hp engines. With.
Among the main advantages of the unit are:
- The presence of an automatic centrifugal clutch, which allows the cultivator to be folded into 2 parts to make it easier to transport;
- An excellent combination of an imported engine and durable domestic "iron" allows you to handle even heavy soils;
- Good processing speed - the cultivator is capable of plowing up to 10 acres in 5 hours;
- The unit requires minimal maintenance and adjustments, it is easy to operate;
- The cultivator is lightweight, so it can be turned over alone;
- Perfectly sharpened reliable cutters;
- The vertical motor can be easily and quickly removed;
- A wide range of attachments can be used.
In addition to all the advantages, the Tarpan motor-cultivator has some disadvantages. Firstly, the manufacturer did not provide for a reverse gear, which is why it is very inconvenient to use the model on small and abundantly planted beds.
Secondly, the thumb quickly gets tired of constantly pressing the throttle. Thirdly, the cutters quickly wind up the weeds, as they are located at right angles.
Fourthly, it is inconvenient to change the engine oil - you need to constantly remove the clutch and unscrew the nuts.
Features of Tarpan cultivators
Russian motor-cultivators of the Tarpan brand are optimal for farmers who own plots of no more than 15 acres. This technique has earned recognition for its reliable motor and quality assembly. Most of the models are equipped with American Briggs & Stratton engines, ranging from 5 to 6 hp. With. The main features of the units include:
- Almost eternal worm-type gearbox;
- High-quality transmission, which makes it possible to move at several speeds;
- The plowing depth ranges from 16 to 25 cm;
- The width of the strip ranges from 25 to 100 cm;
- Improved grip due to the use of more reliable spark plugs;
- The ability to use many options for attachments.
These Russian cultivators can be operated even on virgin soil. At the same time, the manufacturer promises a fairly high performance - about 2 acres per hour of work.
More modern models of the Tarpan brand are equipped with improved Honda, Zongshen and Champion engines. They are less powerful, but their high build quality allows you to use the cultivator without worrying that it will stall from overheating.
Design features of the units
The Tarpan motor cultivator in the old configuration is equipped with a four-stroke gasoline engine of the Briggs & Stratton Quantum brand, produced in America, although every year the manufacturer produces more and more models with Japanese Honda engines. The power of the American engine is 6 liters. with., and Japanese - 5.5 liters. With.
Each of the engines is equipped with an air cooling system, which makes it possible to repair the carburetor much less frequently than in the case of other brands of cultivators. This is due to the fact that air enters not only the engine for cooling, but also into the carburetor, enriching the fuel mixture.
This process has a positive effect on the longevity of the carburetor.
During operation, the worm-type gearbox transfers engine speed to the cutters, which are equipped with a mechanism for adjusting the depth of soil cultivation. In the maximum low position of the regulator, the cutters are lowered to a depth of 20 cm. The width of the covered strip during operation is from 35 to 100 cm. To move around the plot, the cultivator is equipped with two wheels.
The unit controls are located on the steering wheel, which can be adjusted in height. The handlebars are rubber coated and comfortable enough to grip. The tilt of the steering bar can be adjusted to change the tilt of the implement or turn it around.
Popular unit modifications
The most popular configurations are Tarpan TMZ-MK 03 and Tarpan TMZ-MK 04.
Motor-cultivator Tarpan TMZ-MK 03
Specifications:
- Engine builder - petrol 4 stroke Briggs
- Engine power - 6.0 hp;
- Clutch - dry, automatic, centrifugal;
- Reducer - single-speed, worm gear in oil bath;
- Capture width - 350, 700, 1000 mm;
- Overall dimensions (control handles folded) - 1300x700x1060 mm;
- Weight - 45 kg;
- Number of cutters included: 4 pcs.
- Rotation direction of cutters: straight
- Cultivation depth: 20 cm
- Engine power: 4.45 kW / 6.05 HP
- Engine displacement: 190 cc cm
The device of the cultivator Tarpan TMZ MK-03
The cultivator Tarpan TMZ MK-03 has a modular design, so it can be easily transported between the house and the summer cottage. This model with a Briggs & Stratton engine can be almost completely disassembled, the attachments and the motor itself can be dismantled.
The single-cylinder four-stroke engine of the unit develops a power of 6 liters. with., and its resource fluctuates within 1 thousand hours. There are also other modifications on the market equipped with Japanese motors.
For example, the TMZ MK-04 model is supplied with a Japanese Honda engine, which develops a power of 5.5 liters. With.
The transmission of engine speed to the working element is carried out by means of a worm gear. In practice, it shows itself to be much more reliable than belt and chain transmission. The design of the gearbox is located in an oil bath. Despite the high degree of reliability, the gearbox has one drawback - it allows you to move only in one forward gear.
The width of the covered strip can be adjusted depending on the type of attachments. If the unit works as standard, then the width will be 75 cm.With an additional canopy, the width can be increased to 1 m.Cultivator Tarpan TMZ MK-03 can be used with the following inventory:
- Lawn mower;
- Rake;
- Hiller;
- Rotary cutter;
- Plow;
- Flat cutters;
- Ice cleaver.
Rotary snow blowers can also be used. The range of snow throwing will be 5 m. The physical mass of the unit without additional equipment is 45 kg. Light weight and height-adjustable handle bars greatly simplify the operation of the model.
It is also worth noting another modification option - Tarpan TMZ-ML 03 Champion. It is powered by Chinese Champion engines, making it much cheaper than the previous two. Another budget option is the Tarpan TMZ-MK 03 unit, which has a Chinese Zongshen XP 200 engine.
Among other variations with a Japanese engine, it is worth noting the Tarpan TMZ-MK 07 model. It costs much more than all previous configurations, since it allows you to use a variety of oversized attachments, including a wide snow blower.
The domestic agricultural machinery market is not too rich in motor cultivators. Therefore, as soon as the Tarpan TMZ MK-03 motor-cultivator appeared on sale, it immediately attracted the attention of farmers. This model is a versatile and powerful enough unit that successfully copes with many tasks.
Fuel consumption by a motor cultivator depending on loads
Despite the not too high power of the unit and its modifications, it consumes a significant amount of fuel. In the process of plowing the soil, the model requires about 1.5 l / h. This figure may vary depending on the task being performed.
So, when processing hard soils with a plow, the cultivator consumes at least 1.8 liters / hour of work. When removing snow, it "eats" at least 2 liters. fuel. However, it is important to take into account that a certain amount of fuel is lost even when the engine is warming up.
When hilling potatoes, the cultivator requires, on average, 1.6 liters. fuel, and when working with a rake - about 1.5 l / h. work.
Attached implements for working with a cultivator
Good power and reliable parts allow the use of a wide range of attachments. According to the instruction manual, together with the cultivator you can use:
- Weed control between rows. The distance between the rows should not be less than 30 cm;
- Hiller - helps to make furrows, mark an area for beds, take care of potatoes;
- Lugs - make the cultivator heavier and improve its grip on the ground;
- Special wheels with a frame make the movement of the cultivator more convenient;
- Plow - used for deeper soil cultivation.
By purchasing some accessories from this inventory, the owner of the cultivator will greatly facilitate planting and caring for the beds, and will save a lot of time and effort.
Cultivator Tarpan
LLC "Tarpan" - a subsidiary of the production association "Tulamashzavod", designs, manufactures and sells mini agricultural machinery for various purposes.
Cultivators "Tarpan" are affordable, well-assembled, equipped with reliable power plants supplied by companies from the USA, Japan and China.
The principle of operation and description of the Tarpan motor-cultivator
The torque from the gas engine through the clutch mechanism and the worm gear is transmitted to the shaft of the working cutters, which rotate, loosen the soil layer and move the unit along the strip.
The product belongs to the middle class of cultivators, processes any soil density, including heavy ones, on plots up to 20 acres.
Sufficient power of the power plant, the ability to process a working strip up to 1 m wide, a set of additional attachments make the device a productive and multifunctional assistant to the owner of the land plot. 
For convenient transportation, the machine can be quickly divided into blocks:
- Energy, which includes:
- engine;
- clutch mechanism;
- docking station;
- steering.
- Executive, consisting of:
- worm gear;
- right and left rotary cultivators (working cutters);
- loosening depth regulator;
- mounting bracket;
- protective casing.
Most models use four-stroke, vertical crankshaft petrol engines from B&S or Honda. Units with the Chinese Champion engine are offered for a lower cost.
The clutch device is assembled according to the friction scheme, automatic type. The mechanism smoothly engages to transmit torque with an increase in the number of revolutions of the engine shaft.
The lineup
Four modifications of Tarpan cultivators enter the market of garden machinery:
- TMZ-MK-03 and TMZ-MK-04 are middle class devices, differ in the gear ratio of the worm gear;
- TMZ-MK-031 - light class cultivator for working on developed areas;
- TMZ-KE-07-2,2 machine with an electric asynchronous motor powered from a stationary network.
Depending on the manufacturer of the power plant, the product names after the digital index include the designation: B&S, Honda, Champion.
Technical specifications
| Parameter | Unit rev. | Indicator | |||
| Cultivator TMZ-MK | |||||
| 03 | 031 | 04 | CE 07-2.2 electric | ||
| Loosening depth | m | 0,2 | 0,14 | 0,2 | -/- |
| Cultivating band width: | m | ||||
| - cutters | |||||
| - pololniki | |||||
| - cutters and weeders | |||||
| Production | ha / hour | 0,06 | 0,01 | 0,08 | 0,05 |
| Milling cutters installed on diameter | PC. mm | 2 × 2 | -/- | -/- | -/- |
| Weight of the machine prepared for work | kg. | 45 | 28 | 47 | 45 |
| Power | lc. | 6,0 | 3,5 | 6,5 | 2.2 kW |
| Fuel | Gasoline A-92 | electrical network 220V, 50Hz | |||
| Clutch unit | dry design, automatic centrifugal mechanism | ||||
| Reduction gear | one stage, worm type | ||||
Operating instructions - / - * - the value corresponds to the parameter of the previous cell on the left
During the first 12 hours of operation, the cultivator runs in. Avoid excessive loads on the actuators and the power unit.
- Starting and stopping the motor:
- set the fuel supply regulator to the "Idle" position;
- press the cold start button 3 times;
- take out the slack on the kick starter cord and pull it out to its full length with a sharp movement;
- continue the actions until the engine starts;
- to stop the engine, the fuel control lever is moved to the extreme left position.
- Tillage:
- holding the cultivator by the steering handles;
- add engine speed, the automatic clutch mechanism will work, the cutters begin to rotate loosening the soil and moving the unit.
- Crop depth and width:
- determined by rearranging the opener on a multi-hole bracket;
- the deepening of the working cutters is carried out by pressing the steering handles, the deeper the executive body is, the slower the cultivator moves;
- turns are carried out by tilting the unit to the left or right, the reverse of the movement is not provided for by the design;
- the width of the working band is regulated by shifting and adding the number of working cutters.
Attachments
To expand the number of operations in which the Tarpan cultivator can be used, the manufacturer offers to additionally purchase attachments:
- Hiller for processing vegetable crops, cutting, filling furrows and ridges. Installed instead of the depth regulator (opener).
- A set of pololniks used with a hiller. The device consists of lugs and knives fixed on an axle. Loosens and plows the soil between rows. Installed instead of working cutters.
- Protective discs to avoid damage to plants when processing row spacings. Installed on the hubs of cutters or weeders.
- The lawn mower is installed in place of the executive unit.
Accessories sold separately include: a transport device for moving the unit around the site; universal connecting bracket, shaft extension sleeves for installing a third pair of cutters.
Possible malfunctions and repairs on our own
| № | Malfunctions, damages and failures | Cause of occurrence | Your actions |
| 1 | Engine won't start | the speed regulator is not tuned; no fuel comes in; the ignition system is broken |
check the position of the carburetor flap; no fuel, press the suction button 3 times, clean the filter and carburetor; check the gap and clean the plug, replace the plug |
| 2 | Overheating of the engine | the air filter is clogged; the cylinder jacket is dirty |
clean or replace the filter element; clean the cylinder jacket |
| 3 | The engine does not develop revs | clogged air filter | clean or replace the filter element |
| 4 | The output shaft of the cutters does not rotate | low speed; faulty clutch |
increase the number of revolutions; wipe dry the drum and clutch pads |
| 5 | The shaft of the working cutters rotates at idle speed of the engine | faulty clutch | replace stretched or destroyed friction pad springs |
| 6 | Oil leakage along the gearbox shaft | damaged shaft seals | replace the cuffs. |
The owner of the cultivator will help the owner of the cultivator find the necessary spare part, perform service maintenance and repair the equipment in 70 representative offices of Tarpan LLC operating in all federal districts of Russia.
TELL YOUR FRIENDS
In contact with
