How to disassemble the Megan 2 air conditioning compressor. Malfunctions in the Renault Megane air conditioning system and their elimination. The need for timely maintenance for economical operation of climate control

Renault Megane 2 – a comfortable city car with good technical characteristics and an excellent level of comfort.

This machine boasts a large number of electronic systems, among which the most popular is the air conditioning system, because the climate in the car depends on it, and, accordingly, comfort while driving.

The cooling system is one of the most repairable due to the complexity of its location. Let's look at the breakdowns and methods for repairing them.

Major breakdowns of the Renault Megane II air conditioner

Cars Renault differ excellent value prices and quality, which is why many drivers in our country love them. Achieving low prices for these machines is achieved by reducing the cost of peripheral devices, which include air conditioning systems. The second generation Megan is equipped with air conditioners from Nissan cars model from the early 2000s, which in many ways is a big disadvantage, leading to frequent breakdowns.

All failures of the Megan 2 air conditioner should be divided into two large groups: mechanical and systemic.

To mechanical
relate:

  • loss of tightness due to wear of tubes, gaskets, seals;
  • destruction of seals and hoses due to too large temperature differences;
  • contamination of the radiator honeycomb located in front of the engine radiator;
  • twisting or pinching of lines after accidents.

System failures include failures in the operation of electronics, leading to breakdown of the compressor, which often requires its replacement.

In any case, repair of the air conditioner or its individual parts must be carried out by professionals, who are the masters of our car service center. We will not only help troubleshoot the problem, but also advise the client on how to avoid problems in the future.

Causes of breakdowns and their main symptoms

Air conditioners in the second generation Megane break down for two main reasons:

  • dirt clogging into the compressor honeycombs;
  • violation of the tightness and integrity of individual parts.

The Renault Megane air conditioning compressor is a rather fragile device with a small distance between the cells. Because The Megan 2 air conditioning compressor is installed in front of the main compressor of the engine, it is this that collects all the dirt and dust
roads, which makes the distance between cells decrease faster and the compressor needs to work more actively to support set temperature in the cabin. After some time of such operation, the compressor overheats and turns off due to overheating or a short circuit within the system, which will lead to the replacement of the compressor.

Violation of tightness and integrity occurs for three main reasons: accidents, time and sudden temperature changes. In case of accidents, the hoses are pinched or kinked, impeding the flow of refrigerant, causing the compressor to fail and shut down due to overheating.

The main symptoms of air conditioning malfunction associated with the compressor in Renault Megane 2 are:

  1. Decreased level of performance. In this case, there may be a problem with both the coupling and a freon leak.
  2. The appearance of a burning smell in the cabin after turning on the car air conditioner. In this case, the air conditioner will not blow air, because The breakdown is the Renault Megane 2 air conditioning compressor clutch, which simply did not start working.
  3. The appearance of a rotten smell - condensation is not removed.
  4. After filling the air conditioner with refrigerant, it quickly loses performance - it does not cool. In this case, it is possible to diagnose depressurization of the cooling system - tubes, hoses or seals.
  5. Noise during operation. The air conditioner is on the verge of breakdown and urgently requires diagnosis and repair.

Time has a destructive effect on plastic and rubber parts of the system, and sudden temperature changes accelerate the process of loss of rubber and plastic elements its qualities, which leads to depressurization and loss of refrigerant.

Inspection and diagnostics of Renault car air conditioners

Diagnostics of any air conditioner should be carried out at least twice a year.

This is largely due to the fact that in our country there are sharp changes in temperature, which plastic and rubber components of air conditioners do not like, leading to freon leakage.

Diagnostics of a Renault air conditioner is carried out in several stages, including:

The Megana 2 car air conditioner is not without problems with the clutch - the most common breakdown. This element is always diagnosed separately for the presence of a click when the air conditioner is turned on. A click indicates the clutch has engaged with the belt; if it occurs, then the air conditioner is running. IN in rare cases There is lye, but after a while the cabin begins to smell like burning, which indicates problems with the bearing or clutch. In this case, the Renault Megane 2 air conditioning compressor bearing must be replaced.

Stages of car air conditioner repair Renault Megane 2

As with any other car, repairs can be carried out differently depending on the problem. In case of integrity violation metal elements– argon welding is used, when the gaskets and tubes dry out, they are replaced, if there is dirt, they are washed and cleaning, and in case of failures in electronics or overheating, local repairs of a particular system are performed.

In any case, repair of a car air conditioner in our car service center consists of the following stages:

  • inspection;
  • diagnostics;
  • performance checks;
  • repair;
  • performance checks after repair.

On Renault Megane 2, the air conditioner bearing often fails
causes device problems. The Renault Megane 2 air conditioning compressor pulley requires similar attention.

Replacing the coupling and its bearing is carried out according to the following scheme:

  • dismantling the power steering;
  • compressor dismantling;
  • dismantling the central nut;
  • removing the coupling from the bearing using a puller;
  • installation of a new bearing and/or coupling;
  • reverse assembly.

If the bearing of the Megan 2 air conditioner or the clutch of the device is faulty, it is dangerous to continue driving with the damaged part, so you should immediately contact a specialized car service for a replacement.

The air conditioning system is an integral part of any modern car. Thanks to the air conditioner, the driver and passengers are provided with comfort while driving in the heat. But, like any other component, the condenser can fail. How to repair a car air conditioning compressor and what malfunctions are generally typical for the air conditioning system - read below.

[Hide]

Basic malfunctions of a car air conditioner

First, let's look at the symptoms of a Renault Megane two malfunction:

  1. When the air conditioner is turned on, the system does not work.
  2. Cooling appears and disappears.
  3. When the air conditioner is operating, you can hear extraneous sounds, uncharacteristic for the operation of the node.

Since the design of the air conditioning system is a rather complex unit, there can be quite a few reasons for its breakdown:

  1. The Renault Megane 2 air conditioning compressor has failed. You can try to repair this element at home, this task is quite doable. However, if the compressor unit shows no signs of life at all, it is quite possible that it will have to be replaced. You can find more detailed instructions for disassembling the compressor below.
  2. The air conditioner pipes are clogged. Likewise, the problem may be that the air conditioner pipes are not sealed. If the tightness of the air conditioner pipes is broken, this will cause the pressure in the system to be too low, and accordingly, the air conditioner will work very poorly. If possible, then the tightness needs to be restored; if not, then the air conditioner tubes should be changed. If the tubes are clogged, they will need to be cleaned.
  3. The air conditioner pressure sensor has failed. Because of this, the pressure in the system will be incorrect, and accordingly, its normal operation will be impossible. This problem can also be solved - if necessary, the controller can be replaced with a new one.
  4. The noise problem may be caused by the air conditioner bearing. Like any other element in the second Megane, the bearing is not eternal, and accordingly, it can wear out over time. The problem can be solved by replacing the air conditioner bearing.
  5. Clutch malfunction.
  6. Problems with the operation of the air conditioner radiator. The radiator should be replaced if this unit is completely out of order.
  7. The device does not work due to wear on the drive belt. If the belt shows signs of damage or defects, it will also need to be replaced.

As practice shows, most problems can be avoided if you refill the system on time. Recharging the air conditioner is an integral part of scheduled maintenance work. maintenance air conditioning systems. In fact, a refilled Conder will work much more reliably. We have already written about this process. You can read more about how to refill the system at home, what is needed for this and how to get rid of leaks in this (video author - Andrey Oliver).

DIY repair instructions

If extraneous sounds are observed during operation of the device, then most likely the problem lies in the bearing.

Changing this element with your own hands is not so difficult; to do this, just follow these steps:

  1. First, open the hood and disconnect the battery; all electrical repair work must be carried out with the on-board network de-energized.
  2. After this, it is necessary to dismantle the power steering; having done this, you can remove the compressor. If the problem lies in the performance of the compressor device, at this stage it can be repaired or replaced. To replace the bearing, you need to unscrew the central nut on the compressor.
  3. Having done this, you can lubricate the clamps and, carefully, to prevent damage to the coupling, unscrew the three bolts.
  4. Using a special puller, you can remove the coupling from the bearing device.
  5. Next, a new oil seal is installed, further actions Assembly is carried out in reverse order.

As you can see, in general the repair procedure is quite simple; it does not require any specific knowledge; you just need to follow the instructions. Be careful not to damage the device lines during repair work, otherwise problems with the node will continue.

Video “Disassembling the compressor in a Renault Megane car with your own hands”

More detailed instructions regarding the dismantling and disassembly of the compressor unit in the Renault Megane car is presented in the video below (the author of the video is the Anyutka channel).

The higher the temperature outside, the more car owners appreciate having air conditioning in their car. Riding without it required level comfort in summer is simply impossible.

However, if the system is not serviced in a timely manner, then in the summer heat there is the highest risk of discovering that it is faulty and does not cool the interior. vehicle with a sufficient degree of intensity.

In Renault Megane, the air conditioner has a rather complex device, and therefore only specialists can often identify the cause of the malfunction. Maintenance work without sufficient qualifications and in the absence of special equipment can easily aggravate the problem.

Renault Megane air conditioning compressor and other causes of malfunctions

The most vulnerable node in the system air conditioning is a compressor. This is partly due to its wide functionality - it takes refrigerant from the evaporator and supplies it to the condenser under pressure. It is pressure that is one of the reasons that the wear of compressor parts is significantly higher than that of other elements of this system.

Compressor repair is complicated enough complex device, therefore, if it completely fails, the car owner will inevitably face expensive repair work.

Renault Megane 2 air conditioning compressor: repair price

If it is not possible to repair individual components of the compressor, then the cost of replacement can be very expensive. The reason is expensive original spare parts and certain difficulties that arise when dismantling the compressor.

However, replacement of this part is required in as a last resort. Often enough timely repairs or replacing bearings and other components in order to extend the life of the compressor, avoiding costly repairs.

When to change the air conditioner bearing on Renault Megane 2

Most often, air conditioning system malfunctions on this car connected to the bearing of the Megan 2 air conditioner. High speed Its wear is explained by the fact that the bearing operates constantly together with the engine. You can determine when the bearing replacement time has come by the characteristic noise.

Experts distinguish several stages of its manifestation:

Renault Megane 2 air conditioning compressor pulley: the dangers of untimely repair

Lately replaced
the bearing entails the following damage to the system:

  • at the first stage, the compressor seals melt due to severe overheating of the system;
  • then, due to wear, the insulating varnish in the winding of the electromagnetic clutch burns out;
  • with such damage there is a high risk full exit failure of the clutch, which significantly increases the cost of repairing the air conditioning compressor;
  • overheating of the clutch in turn ahead of schedule disables the compressor seal, which in the future often becomes a source of freon leakage and depressurization of the system.

Renault Megane 2 air conditioning compressor: repairs related to freon leakage

In the air conditioning system of any car, the lion's share of malfunctions are associated with depressurization of the system, and the Renault Megane is no exception.

Quite often the source the tube becomes leaking high pressure, which at the place of its attachment is exposed to increased exposure to dirt and dust. As a result of this, corrosion occurs here faster than in other components, and therefore holes can literally form through which freon escapes.

Another source of leaks is the compressor. However, it is impossible to identify the exact place where freon is leaving from, as well as to establish the very fact of its leakage from the system without special equipment, and therefore in this case It’s worth leaving your car repairs in the hands of professionals.

First, the pressure in the system is determined. If it does not meet the standard, then before refueling the system, a thorough diagnostic is indicated in order to identify the source of the leak. IN modern car services it is usually carried out in one of two ways:


If it is determined that the system has been depressurized, it must be evacuated. This will remove air and liquid from it that have accumulated there during depressurization. If this is not done, new renovation Renault Megane 2 air conditioner will be needed very quickly.

Do not forget that in addition to monitoring the refrigerant level, it is also necessary to monitor the oil level in the system, since if there is a lack of it, the air conditioner parts will wear out faster and fail.