In the trunk of any motorist there is a tool for carrying out renovation works... Some have a few wrenches, a hammer, a pair of screwdrivers and pliers. Others have a full-fledged set of fitting and assembly tools, such as an auto mechanic's set. NIA-1.

Auto mechanic set NIA-1 allows you to perform assembly and disassembly work in the process Maintenance or when renovating vehicles domestic and foreign production. The thoughtful combination of the tool included in the set, its quality and low price do NIA-1 an excellent alternative to foreign tool kits.

The auto mechanic's set includes a wide range of combination wrenches that combine the functions of open-end and ring-type. Availability of this type wrenches allows you to reduce the total number of tools in the set and reduce the weight of the set itself. And it also gives one undoubted advantage: if, when working with an open-end wrench, you need a ring spanner of the same size, then you just have to turn the key the other way - and not look for a suitable one in a bag with tools!

The ratchet wrench will help the mechanic to carry out work in limited space... Due to the presence of a ratchet in the design of the key, there is no need to rearrange it when unscrewing the fasteners. NIA-1 It is also completed with socket heads in size from 8 to 24. Socket heads allow you to unscrew any fasteners without damage, because contact him along his entire height. Thanks to this, the "rounding" of the fastener edges is prevented. In addition to the end ones, the set includes standard spark plug heads (16 and 21 mm), which allow you to quickly and easily replace spark plugs for gasoline engines. assembly work, and gloves - protect the hands of the mechanic from dirt and damage. The entire tool is packed in a sturdy bag that is easy to carry and takes up little space in the trunk of a motorist. The tool is made of high quality materials which allow for frequent use and high loads during operation.

Technical details
Set composition
1. Combined spanner 8x8 - 1pc.
2. Combined wrench 10x10 - 1pc.
3. Combined wrench 12x12 - 1pc.
4. Combined spanner 13x13 - 1pc.
5. Combined wrench 14x14 - 1pc.
6. Combined wrench 17x17 - 1pc.
7. Combined wrench 19x19 - 1pc.
8. Combined wrench 22x22 - 1pc.
9. Combined wrench 24x24 - 1pc.
10. End head 8 - 1pc.
11. End head 10 - 1pc.
12. End head 11 - 1pc.
13. End head 12 - 1pc.
14. End head 13 - 1pc.
15. End head 14 - 1pc.
16. Socket head 15 - 1pc.
17. End head 17 - 1pc.
18. End head 19 - 1pc.
19. End head 22 - 1pc.
20. End head 24 - 1pc.
21. Candle head "16" - 1pc.
22. Candle head "21" - 1pc.
23. Hinge - 1pc.
24. Extension, 250 mm - 1pc.
25. Ratchet wrench - 1pc.
26. Key with connection square large, 300 mm - 1pc.
27.Slotted screwdriver 8.0x150 - 1pc.
28.Slotted screwdriver 6.0x150 - 1pc.
29. Phillips screwdriver No. 2x100 mm - 1 pc.
30. Phillips screwdriver No. 3x150 mm - 1 pc.
31. Locksmith chisel 160 mm - 1pc.
32. Hammer 500 g - 1 pc.
33. Combination pliers 180 mm - 1 pc.
34. Side cutters 180 mm - 1pc.
35. Adjustable pliers 250 mm - 1 pc.
36. Knitted PVC gloves - 1pc.
37. Ballpoint pen - 1pc.
38. Notepad for notes - 1pc.
39.Bag - 1pc.

A professional locksmith tool for a car service is an important component to ensure the proper quality of services. It is necessary to perform work on high level and coverage of the full range of auto repair operations. We invite you to purchase reliable, high-quality in our online store. Avtomaster presents the best manufacturers and offers the maximum complete list necessary auto tool.

Our assortment

In our store you can buy King Tony, Mastak, Stahlwille and Stels products. It is offered in wide range, which allows you to fully equip a car service from scratch. On sale are:

• Tool holders - convenient solutions for organizing professional workplaces together with tool trolleys and locksmith's workbenches. Huge selection of kits: mono, mixed, special. The entire list of necessary accessories: from nozzles and probes to filter removers, measuring and test equipment. Also - ready-made sets of lodgements with the number of trays from 9 to 17.
• Tool trolleys - mobile workstations for car mechanics with a full set of tools in cradles. Solutions with various designs trolleys and complete sets: standard, master, pro and expert.
• Torque wrenches and adapters - equipment for working with critical fasteners that require control of the tightening force. Big choice inventory: torque wrenches and screwdrivers, electronic adapters, torque amplifiers. Also, a complete selection of key nozzles and repair kits for self replacement worn parts.
• Auto Repair Wrenches - a full range of wrenches to buy individually and in sets. Open-end wrenches, ring wrenches, combination wrenches, socket wrenches and ratchet wrenches. For hard-to-reach / narrow areas - with hinge, curved profiles. Special keys: balloon, candle, split, starter, etc.
• Car kits - universal kits equipment for work on the road and in the shop.
• Auto tools in boxes and suitcases, special dielectric tools for wiring operations.
• Screwdrivers and replacement blades - accessories for nuts, clamps, power, dielectric, with different profiles and dimensions. T-shaped screwdrivers for improved grip.
• Pliers, percussion, cutting and measuring tools: a complete list of equipment required for repair, locksmith and installation work.
• Socket and special heads - huge selection nozzles for assembly and locksmith operations: standard, percussion, special, thin-walled, short and deep, with different sizes square. The whole range of profiles used: from special 4-sided, radial to standard 6-and 12-sided, and the so-called Torx E-necks.
• Accessories to socket heads: ratchets, cardan shafts, wrenches, extension cords, adapters, as well as repair kits for them.

A hand tool is used to tighten the fasteners (bolts, nuts and screws). Below is a list of hand tools that no auto mechanic can do without. The specialized tool is not included in this list.

Did you have to borrow a certain instrument several times? So you need to buy it!

Most auto mechanics will not refuse their young colleague's request to sometimes borrow one or another tool. But if you need a tool several times already, buy it as soon as possible. Also, when returning a borrowed instrument, make sure it is clean and return it to the person from whom you borrowed it. By doing this, you will build the confidence of your colleagues.

• 1/4 '' Square Socket Set
• Ratchet drive with 1/4-inch square drive
• 2-Inch Extension To Socket Heads With 1/4-Inch Connecting Square
• 6-Inch Socket Extension with 1/4-Inch Connecting Square
• Collar with 1/4-inch connecting square
• 3/8-Inch Socket Set
• Togx socket set with 3/8 '' connection square
• 13/16 "Plug Socket, 3/8" Square Connector
• 5/8 '' Plug Socket, 3/8 '' Square Square Connector, Ratchet
• 1/2 Inch Socket Extension with 3/8 Inch Connecting Square
• 3 Inch Socket Extension with 3/8 Inch Connecting Square
• 6 '' socket extension with 3/8 '' connection square
• Eighteen Inch Socket Extension with 3/8 Inch Connecting Square
• Universal Pivot Link to Socket Heads with 3/8 '' Connecting Square
• 1/2 '' Square Socket Set
• Ratchet 1/2-inch square drive
• "Breaking" crank long length with 1/2-inch connection square
• 5 Inch Extension To Socket Heads With 1/2 Inch Connecting Square
• 3/8 "to 1/4" Square Adapter
• 1/2 "to 3/8" square adapter
• 3/8 "to 1/2" square adapter
• 3/8 "to 1" Rim Combination Wrench Set
• Combination wrench set with bore sizes from 10 mm to 19 mm
• Socket wrench set, hexagon socket, 1/16 "to 1/4" rim
• A set of wrenches for fasteners with an internal hexagon, with a bore size from 2 mm to 12 mm
• Socket, w / hex socket, 3/8-inch rim
• Box spanner 13 mm / 14 mm (split head with hexagonal mouth)
• Box spanner 15 mm / 17 mm (split head with hexagonal mouth)
• 5/16 "/ 3/8" Box Wrench (Split Head with Hex Head)
• 7/16 "/ 1/2" Box Wrench (Split Head with Hex Head)
• 1/2 "/ 9/16" Box Wrench (Split Head with Hex Head)
• Side cutters
• Needle-nose pliers
• Adjustable wrench (Swedish)
• Pliers-clips (with fixation)
• Expander for mounting / dismounting retaining rings
• Electrician's pliers, stripping or crimping
• Ball hammer
• Hammer with rubber head
• Hammer hammer (with inelastic impact)
• Set of five flat blade screwdrivers
• A set of four Phillips cross-head screwdrivers
• Screwdriver Togh No. 15
• Screwdriver Togh No. 20
• Houndstooth fork set (inch)
• Houndstooth fork set (metric)
• Personal file
• Kerner
• Drifts (different sizes)
• Chisel
• Multi-blade folding knife
• Spool Service Tool
• Cooling system tester
• Filter remover wrench (large)
• Filter remover wrench (smaller)
• Electrical tester
• Gauge Gauge Probe
• Scraper
• Pry bar
• Retractable Blade Knife
• Magnetic probe
• Torque wrench
• Micrometer for 0-1 inch range
• Micrometer for a range of 1-2 inches

Why has Philips become the common name for one type of screwdriver?

In 1936, inventor Henry M. Phillips patented the Philips head screw. The Phillips slot on the head of this screw does not reach its edge, so the tip of the screwdriver is always fixed in the center of the screw head.

Rice. Safety glasses are the most essential accessory for any tool kit

Rice. Combination wrench. Both wrench heads are sized for the same bolt head size. Please note that the open end is angled towards the key handle to facilitate working in tight spaces

Rice. Three open-end wrenches of different quality... The cheapest (left) is made of flimsy steel, thicker and rougher than a standard key (center). Shown on the right is a professional-quality key (and the corresponding price)

Do not use such a tool

A young mechanic who went to work in a workshop, arriving at work on the first day, put his toolbox on the workbench. Another mechanic, seeing that it contained several adjustable wrenches, along with a full set of quality tools, said: "Take this away from the eyes of the authorities." The movable jaws of an adjustable wrench often slide over the surface of the head of a bolt or nut, rounding off sharp edges, and it becomes much more difficult to unwind such a damaged fastener.

Rice. A split-head box wrench with a hexagonal mouth. Also known under the names "water wrench", "locksmith wrench" or "pipe wrench". The jaw of this wrench covers most of the faces of the hexagonal profile of pipeline fittings and allows you to grip the part as tightly as possible without damaging it

Rice. Ring-head box spanner. Recommended for loosening and tightening bolts and nuts when a socket wrench cannot be used. The heads on both sides of the key have different number... Such a wrench is preferable to an open-end wrench because it covers the bolt head around the perimeter, and not only on both sides, like an open-end wrench.

Rice. Open-end wrench is a tool general purpose... The heads on both sides of the key have a different seating size (number). An open-end wrench should not be used to tighten “all the way” or to loosen tightly threaded connection due to the danger of it being torn off the head of a bolt or nut

Rice. Flat blade screwdrivers (left) vary in blade length and blade thickness. The thickness of the tip should correspond to the width of the slot on the screw head. Phillips screwdrivers (right) differ in length and size of the "patch" on the tip of the tip. The smallest "patch" of the Philips screwdriver # 1, the Philips screwdriver # 2 (shown in the photo) - the most common - has a larger one. The bluest tip of the Philips # 3 screwdriver is designed to work with the largest screws

Reception using grinding paste

Apply a small amount of grinding paste to the head of the bolt or screw, used for lapping the valves. It will "grab" the tip of a screwdriver or other tool, not allowing it to "break" from the fastener. You can buy such a paste in tubes at any auto parts store.

Rice. A variety of ticks. Combination pliers (far left) are often confused with water crimping pliers (second from left)

Rice. Ball hammers (top) commercially available vary in head weight (usually in ounces). Below is a hammer with a soft (plastic) striker. The hammer head should always be softer (have a higher ductility) than the material being processed. To avoid damage when machining cast iron or steel engine parts, insert a block of wood or similar material between it and the steel-headed hammer.

Rice. Different kinds socket wrenches

Rice. Various options for socket extensions (extensions). The universal swivel extension, shown in the center (bottom), is convenient for working in hard-to-reach places

Rice. Socket heads - dodecahedral, hexagonal and octahedral. It is better to use hex sockets as they cover all six facets of the head standard bolt or a nut, allowing you to apply more force without breaking off the edges of the head

Rice. The hexagonal socket rests on all faces of the bolt or nut head. The twelve-sided head, if excessive force is applied, can "break" the edges of the head of a bolt or nut

Rice. Sockets: standard twelve-sided short (left), articulated (center) and elongated (right). The last two are hex

Rice. Standard files. Never use a file without a handle

Rice. A mechanical collet (top) and a telescopic probe with a magnet at the end (bottom) are indispensable tools when you need to reach a small part that has fallen into a place where your fingers cannot be reached

Rice. Stethoscope - with its help a mechanic "listens" to the engine, looking for a place from which a suspicious noise is coming

Rice. Typical sharpening machine. Pay attention to the protective screen installed on it. But while the screen does provide some eye protection, be sure to use protective goggles when working on this or any other machine.

Rice. Hacksaw saw. The teeth of the hacksaw blade should be oriented away from the saw handle. The thinner the material to be cut, the smaller the teeth of the hacksaw blade should be.

Rice. Drill (top) with spiral flutes (grooves) and reamer (bottom) with straight cutting edges

Rice. Drill cutting edge

Rice. Various punches (left) and chisel (right)

Rice. The striker of this chisel is riveted, and this is dangerous (a). If you hit such a chisel with a hammer, sharp pieces of metal can break off and injure you. When you find a tool with a riveted face, grind off the riveted part as shown in this photo. This will avoid the risk of injury (b)

Rice. Tapping using a hand die

Rice. Taps - roughing and finishing. Finishing taps are commonly used to clean or update existing threads in parts.

Rice. Dies are used to cut external threads on cylindrical rods, and taps are used to cut internal threads in holes.

Rice. Installing the tap into the drilled hole. To obtain the required clearance in the thread, the hole diameter must exactly match the size of the tap. A drill of the corresponding diameter is called a threaded drill.

Rice. An inexpensive mesh tray is convenient for the organized storage of small parts

Rice. A good portable fluorescent lamp is essential for work. A fluorescent lamp does not heat up as much as an incandescent lamp, and will not cause a fire if accidentally splashed on it, unlike the unprotected incandescent lamps used in some emergency lamps

Rice. For a start, it is enough to have a set of only the most necessary tools... Experienced, highly trained auto mechanics spend thousands of dollars annually buying tools, such as the one assembled in this large (and expensive) toolbox.

Auto mechanic set NIA-1 allows you to perform assembly and disassembly work in the process of maintenance or repair of vehicles of domestic and foreign production. The thoughtful combination of the tool included in the set, its quality and low price make NIA-1 an excellent alternative to foreign tool kits.

In the trunk of any motorist there is a tool for carrying out repair work. Some have a few wrenches, a hammer, a pair of screwdrivers and pliers. Others have a full-fledged set of fitting and assembly tools, such as the NIA-1 auto mechanic set.

The NIA-1 auto mechanic kit allows you to perform assembly and disassembly work in the process of maintenance or repair of vehicles of domestic and foreign production. A well-thought-out combination of the tool included in the set, its quality and low price make NIA-1 an excellent alternative to foreign sets of tools.

The auto mechanic's set includes a wide range of combination wrenches that combine the functions of open-end and ring-type. The presence of this type of keys allows you to reduce the total number of tools in the set and reduce the weight of the set itself. And it also gives one undoubted advantage: if, when working with an open-end wrench, you need a ring spanner of the same size, then you just have to turn the key the other way - and not look for a suitable one in a bag with tools!

The set of tools NIA-1 is also completed with socket heads ranging in size from 8 to 24. Socket heads allow you to unscrew any fasteners without damage, because contact him along his entire height. This prevents "rounding" of the fastener edges.

The tool included in the kit is certified (if necessary, the corresponding documentation is provided).

Set composition

1.	Combined spanner 8x8	1 PC.
2.	Combined spanner 10x10	1 PC.
3.	Combined spanner 12x12	1 PC.
4.	Combined spanner 13x13	1 PC.
5.	Combined spanner 14x14	1 PC.
6.	Combined spanner 17x17	1 PC.
7.	Combined spanner 19x19	1 PC.
8.	Combined spanner 22x22	1 PC.
9.	Combined wrench 24x24	1 PC.
10.	Socket head 8	1 PC.
11.	Socket head 10	1 PC.
12.	Socket head 11	1 PC.
13.	Socket head 12	1 PC.
14.	Socket head 13	1 PC.
15.	Socket head 14	1 PC.
16.	Socket head 15	1 PC.
17.	Socket head 17	1 PC.
18.	Socket head 19	1 PC.
19.	Socket head 22	1 PC.
20.	Socket head 24	1 PC.
21.	Candle head "16"	1 PC.
22.	Candle head "21"	1 PC.
23.	Hinge	1 PC.
24.	Extension, 250 mm	1 PC.
25.	Ratchet wrench	1 PC.
26.	Key with connection square large, 300 mm	1 PC.
27.	Slotted screwdriver 8.0x150	1 PC.
28.	Slotted screwdriver 6,0х150	1 PC.
29.	Phillips screwdriver No. 2x100 mm	1 PC.
30.	Phillips screwdriver No. 3x150 mm	1 PC.
31.	Locksmith chisel 160 mm	1 PC.
32.	Hammer 500 g	1 PC.
33.	Combination pliers 180 mm	1 PC.
34.	Side cutters 180 mm	1 PC.
35.	Adjustable pliers 250 mm	1 PC.
36.	Knitted PVC gloves	1 PC.
37.	Ballpoint pen	1 PC.
38.	Notebook	1 PC.
39.	Bag	1 PC.

Passport to the set of tools of the auto mechanic NIA-1

The ratchet wrench will help the auto mechanic perform work in confined spaces. Due to the presence of a ratchet in the design of the key, there is no need to rearrange it when unscrewing the fasteners.

Set of tools NIA-1 It is also completed with socket heads in size from 8 to 24. Socket heads allow you to unscrew any fasteners without damage, because contact him along his entire height. This prevents "rounding" of the fastener edges.

In addition to the end caps, the kit includes standard spark plug heads (16 and 21 mm), which allow you to quickly and easily replace spark plugs for gasoline engines.

The rest of the tool included in the auto mechanic's kit helps with disassembly and assembly work, and gloves protect the auto mechanic's hands from dirt and damage.

The entire tool is packed in a sturdy bag that is easy to carry and takes up little space in the trunk of a motorist. The tool is made of high quality materials, providing for its frequent use and high loads during operation.

Specifications

Payment

Cash payment

Delivery

Pickup from the warehouse

Mon-Fri: from 10:00 to 18:00
Pickup is free.

Up to 30 thousand rubles. - from 500 rubles;
From 30 t. Rub. - is free.

Delivery to the regions of the Russian Federation

Delivery by Russian Post

Cash payment

You can pay in cash by courier upon delivery of products in Moscow and the Moscow region.

Cashless payments (for legal entities)

After placing your order, send by mail [email protected] website order number and your organization details.

Payment by bank account (for individuals)

You can pay for your order at any commercial bank.
After placing your order, send by mail [email protected] website order number and full name with contact information, we will issue you an invoice for payment.

Payment by credit card (for individuals and legal entities)

When paying and receiving products from the warehouse or by courier, inform us in advance about the desire to pay by credit card.

Pickup from the warehouse

Pickup from the warehouse is possible during its working hours:
Mon-Fri: from 10:00 to 18:00
Pickup is free.

Courier delivery in Moscow and Moscow region

Delivery of small-sized cargo in Moscow within the Moscow Ring Road:
Up to 30 thousand rubles. - from 500 rubles;
From 30 t. Rub. - is free.
Delivery of small-sized cargo in Moscow in the Moscow region - individually.

Delivery oversized cargo in Moscow and the Moscow region - individually.

We will definitely agree with you on a convenient delivery time.

Delivery to the regions of the Russian Federation

Carried out by transport companies. We cooperate with all major transport companies.
Choice transport company depends on your wishes and is negotiated with each client individually.
The cost of delivery of goods to the terminal of the transport company is free.

Delivery by Russian Post

At your request, we will send the order through the Federal State Unitary Enterprise "Russian Post".