In every man's use, there are things from plastic. Even with the most accurate and gentle use, the plastic surface is coated with scratches, both small and inconspicuous, and serious, clearly striking. And so I want to return the surface of the original look ...

Removal scratches on plastic

Regardless of whether the trouble happened to your mobile phone, a new laptop or tablet, a car parride, a car or another plastic surface, a remedy for scratches on plastic. In autocosmetics stores, and recently and in workshops mobile devices You can find a special paste on sale, allowing you to get rid of scratches of different depths on plastic surfaces.

Note that before closeing scratches on plastic, you should choose the right tool, focusing on the width and depth of damage. For small scratches and scrap, there will be polishing enough, whereas deep damage to the surface requires processing by the spray and subsequent use of a special paste, which will fill with a scratch on the principle of putty. After the paste is driving, the processed place will need to polish and paint if necessary suitable paint For a monotonous appearance of the device. How to smear scratches on plastic, you can suggest consultants of specialized stores, there are quite a lot of funds and for each coverage you can choose the most suitable.

How to polish scratch on plastic?

If the surface damage is shallow, you need to think about how to point scratch on the plastic. In the range of specialized stores there are facilities for polishing CDs, such as "Disc Repair", or polyroli for mobile displays phones, such as "displex". If there is a car market nearby, then it is there you can find a paste to polish the plastic car, while it varies with a graininess (you need the smallest!) And it is relatively inexpensive. Before polishing, the treated surface is necessary to be deguted using acetone or alcohol, note that the solvent can cause a serious damage to the plastic, and there will be no damage from alcohol. For polishing it is better to use a cotton cloth, and the means to rub over the surface until the scratches disappear.

Keep in mind that some poly rays for plastic are not suitable, carefully examine the instructions to the purchased product, so as not to apply more harm to the device.

Random scratches on plastic in the car cabin appear regularly. How at home independently remove strips on plastic? The depth of damage is easily determined by the naked eye or inspection with the help of magnifying glass.

You can cope with shallow damage using:

• polyrolla
• antitrapine
• polishing pastes
• scratch pencils
• work specialist hundred
• holded means (hair dryer, lighter).

Tip: Inspection scratches spend during the day on the street, or indoors with good lighting.

The main property of plastic - softening under the influence high temperatures. The surface under repair must be flushed, dry. Gradually heat her hair dryer. Small dashes under the action of heat smoothed, become invisible. Deep - do not disappear, but slightly smoothed. With a hair dryer, the removal of scratches is recommended on a smooth plastic car cabin. On the "Puparchy" distorted the whole texture, and the type of plastic will only worsen.

Removal of shallow grunges on plastic lighter

Displex polishing tool is designed to mask and remove scratches on the screen dashboard Auto. Pasta copes with small stripes on the laptop screen. Displex in a red tube perfectly masks the emerging scratches on plastic in the cabin car. When polishing the displex® tool, the surface is amenable to paste microparticles.
Plastic particles fall into the scratch cavity and climb it with themselves. As a result, the bands are not recorded by our vision, the paste removes the optical curvatures on the refraction borders.

Application: Displex is applied circular movements With the help of cotton fabric, cotton tampon (disk), baby diaper. The procedure takes 2 minutes. If scratch is visible, repeat the wiping movement. The total amount of time spent will be 20-40 minutes. Depends on the magnitude and depth of damage.

Deep defects are fixed not easy, in several stages.

Removal of deep scratches on plastic in the car

It will take a small piece of plastics similar to the repaired area. Take internal surface Plastic (from partitions). By this we do not harm the designs of parts.
Plastic dissolve in dichloroethane or in another solvent (by type of plastic). The resulting solution gently apply to the scratch. So far, the repair surface has not frozen, it can be given to the texture of the plastic and any shape.

Polishing of plastic does not lead to a complete disappearance of scratches, only refreshes its appearance. It is completely inappropriate on a rough, matte surface. Thresholds and door holdings are not subject to polishing and repair. Details are replaced with new ones.

Removal of large scratches:

• on the damaged place to apply the composition that fills the scratch. It is selected by the type and properties of plastic;
• carefully sanding filled damage;
• after recovery, apply a factory pattern on the plastic cabin of the car. To do this, part of the intact surface is covered with a gel plasticizer. After soaring, remove the gel, the resulting drawing is transferred to the restored place;
• perform a tinting and staining.

Tip: Removal scratches on plastic in the car - pretty difficult process. We are not sure of your skills and forces, - use the sales of scratches. Such work is performed on many hundred and car wash.

Choosing the car, most drivers are focused on the convenience of the cabin, engine power, and how much gasoline is spent by 100 km. However, this is not the latest factors that it is important to take into account.

It is also necessary to pay attention to the quality of seats, plastic parts and torpedoes. The worse quality, the faster there are holes, scratches and scratching.

The holes can be sewed, no one will not pay attention to them. But remove scratches on plastic in the car's cabin - this is a matter that requires special skills.

Professional technologies

To eliminate scratches on plastic, it will be better to contact a car dealership where it will quickly help solve this problem, but for a large fee.Why overpay, if you can do everything yourself.

What to remove scratches?Professionals use a lighter, a hairdryer or a special pencil. If you have little experience in disguise disassembly and other damage, it is better to use folk methods.

Lighter

A scratch or chip appeared on the torpedo? Do not panic. Buy a lighter and follow the actual action algorithm.

So, the phased removal of scratches on the plastic of the car with the help of open fire:

1. Turn on the lighter and spend it along a damaged place 2-3 times. Be careful, too long in the same place in one place will strongly melt the material, and then you will probably have to take the car into the car dealership or change the item at all.
2. When conducting along damaged plot, plastic melted a little. Take the toothpick or something else, and gently move it to the chick.

That's the whole process. It is quite simple and easy that even a woman can cope with it, nothing meaning in this.

Then get rid of the resulting soot on the torpedo. Just after the processed place cools.

Fen

Get rid of scratches and with a hair dryer. Such temperature method Ideal for removing web (small damage).

Procedure:

1. Turn the hair dryer into the socket and install the average blowing. The air should be hot enough, so that the plastic melted.
2. Send a hair dryer to a clean torpedo section that requires restoration. Spend them along the scratched area. Wait for all scratches will drag on.

Be careful with this technique, and do not install the most powerful hair dryer. Plastic panels melt quickly, it will lead to surface deformation.

Pencil

If the panel is scratched, rescued a restoring pencil or a napkin. You can buy them on car markets or in stores. Famous brands - Displex and Disc Repair. The principle of using pencils is very simple.

They are bottles with special content inside.

Application procedure:

1. A place requiring restoration should be treated with a degreasing means, but at the beginning well wash with soap solution and dry.
2. Pick up the right tint so that the treated surface is not very different from the entire panel.
3. Then use a purchased pencil for disguise damage. Drive the sharp end of damaged places. Leave dry.

After graduating the event to polish the processed place.

Folk ways

Remove scratches on plastic surface and scuffs will be and people's ways.

Polishing works are considered one of the most important processes in restoring the appearance of the car. If you do not want to give money due to the appearance of small scratches, remove them on your own.

Table. How to remove scratches on the car of the car by folk methods.

№	Means	How to remove scratches from plastic?
1	Toothpaste	This agent can be used to polish plastic parts in the car, for CDs, phones. Use the usual toothpaste, without multicolored particles, also need clean rags. How to remove scratch with plastic in the car's cabin: Thoroughly wash the car yourself or. Move the car to place with a stable temperature. It is undesirable to leave him in the sun. Apply a small amount of toothpaste on a damaged area. Take a dry cloth and polish the right place. Make it until the scratch is completely stuck. Toothpaste is suitable for poloking the cabin, body, headlights and other parts on which scuffed.
2	Baking soda	Restore the damaged plastic surfaces will help the usual food soda. Do not be surprised, it really works. How to remove scratches on plastic: Mix two pieces of food soda with one part of the water. Fill the scratch with the resulting mixture. Carry the Cashitz into the car with circular motions. Remain remnants Remove with a pure damp cloth. Over the rain, the food soda will still wash off, regardless of how hard you rubbed it. If the torpedo is dark color, try to mix the soda with a suitable varnish and fill damage to the composition. Apply it to remove scuffs on the side panels is not recommended, removing scratches the mixture will start turning over time.
3	Baby powder	If you need to urgently eliminate scratches on the plastic of the cabin, save the children's powder. It is used similarly to Soda. You just need to pour on a damaged place and linnet with a clean piece of fabric.
4	Banana and glass cleaner	To implement this method, you will need a banana with peel. As in the case of a toothpaste, this plastic polishing strategy is designed for minor scratches and scratches. The method is somewhat strange, but very efficient. Nowadays, nothing can be surprised, you need to take and try. After all, many methods are very cheap and effective, despite their components. How to remove damage on the panel: Clean the banana, and cut the piece. Wipe plastic by the citrus itself. Then take the banana peel, wrap around the finger and wipe the surface to it. Remains remove a clean towel. At the end, spray the glass cleaner on the plastic and swing dry. It will restore the shine.

In the home conditions will not be able to get rid of deep damage. Such means help disguise only minor defects, and it is important to know that not long.

A few weeks later, and if you're lucky, in a month, you will have to repeat the procedure or buy a professional tool, so as not to suffer.

Overhaul

A radical way to remove scratches from plastic lies in overhaul (Painting and varnishing).However, several preparatory activities should be performed before these manipulations.

This method is suitable if the surface is very bad conditionIt has multiple scratches and scratching.

Buy sandpaper with grain grain 400, 800, 1000 and 2000, as well as a cleaner and polishing agent.

First, dismantle the torpedo and take the premises to work.

Phased removal of scratches on plastic in the car's cabin:

1. Soak the sandpaper in water before use. Usually it is not required pre-soaking, but it will soften it a little.
2. Slightly sanding the surface of the lowest grain. Then we rinse with water, take the sandpaper 800 and continue the stripping.

Sanding paper cleans all the dirt from the plastic panel.Then follow preparatory work To the new painting of the car. For torpedoes, buy a special primer, it is sold in the canopy. Apply it in several layers.

Leave the primer to dry, and take advantage of the emery paper to be cleaned. Do not use the grinding machine, the whole process is better feeling hands.Clean the surface to the perfectly smooth state.

The last stage is the applying of paintwork. Take work in a clean room so that there are no dust particles on the torpedo.First paint is applied, left to dry. Then varnish, you can in several layers.

Leave the torpedo to dry in the sun. Then set the panel back to the machine salon.

Overhaul removes all scratches and. Thus, you can not only return an attractive look, but also to change the color of the torpedoes and other panels.

For proper fulfillment Any technique, it will be impossible to find a damaged place.

Try to fulfill all the recommendations as accurately as much as possible, and follow the advice, and so that the scratches do not appear, you should properly care for plastic surfaces.

Own car is perceived by most drivers as small childBeyond which you need to constantly monitor - what if it will hurt, scratched or sick? Fortunately, such close attention is not required: it is not possible to hit independently, and spontaneous diseases are rare enough. It remains only an element of chance, from which no one is insured.

A very common random problem is the appearance of scratches on plastic parts of the car. The usual plastic does not relate to the category of solid materials, so careless handling of keys, drops different items in the cabin, even the input and output from the salon - all these actions can lead to the occurrence of scratches on the surface of the plastic.

For many drivers, this situation is extremely unpleasant, because the smallest damage is still noticeable and calling the eyes, constantly being in sight. If we are talking about a serious and deep scratch, which ran across the entire front panel - the gloomy view of the owner of the car will complement this picture. So that this is not happening, this article will answer the question of how to remove scratches on the plastic in the car.

Types of damage to plastic

First of all, it is worth understanding which damage to plastic can be - perhaps not everything is so dangerous as it seems at first glance. Damage to plastic parts in the cabin can be classified as follows:

1. Small scratches. Such damage is one of the most common and cunning. The apparent minor problem may be much more serious. Yes, a couple of small scratches are a trifle, but when all the details are covered with such scratches, the interior is pretty pretty. Good news is the fact that eliminate not deep scratches It is possible to cheap and reliably, even if they cover a significant area of \u200b\u200bthe salon plastic.
2. Deep scratches. It is easy to eliminate a deep scratch will not be released, so you have to use more radical ways (we will go further about them). However, dealing with such a type of damage to plastic, it is not necessary to despair - deep scratches can be repaired, and you will not need to change the part for their elimination to eliminate them.
3. Damage from sun rays. This kind of damage is especially unpleasant for several reasons: first, it is not always possible to protect against it, and secondly, ultraviolet radiation makes the plastic elements burn out, and work for their recovery will require serious effort.

Situations are very often occurring, when different damage adjacent to each other, creating a very impartial picture.

If there are a large number of scratches and faded plots, it is worth thinking about the overhaul of the plastic part. In addition, it is worth paying attention to such a moment: the corrugated surface is practically not amenable to rapid repairs, and in the case of such plastic output one - full repair Damaged surface.

Basic solutions of scratches

There are several ways to remove scratches with plastic elements Salon. The most common of them are:

1. Elimination of scratches with a hair dryer.
2. Smoothing the damaged area by open fire.
3. Elimination of scratches with polishing.
4. Masking damage with special means.
5. Overhaul of plastic part.

Every method is worth talking more.

Removal scratching heating

We make removal scratches on plastic in the car's cabin! Delete small scratches You can with the help of an ordinary hair dryer.

The meaning of this repair is here: the heating of the plastic part leads to self-drawing small defectsAs a result, they become almost imperceptible.

The process of eliminating scratches with a hairdryer is as follows:

• first, the damaged surface is thoroughly washed washing agents;
• after drying the panel, a working hairdryer is sent to it included on the minimum power;
• when the plastic is heated, you need to monitor its reaction (if scratches are not delayed, then you need to increase the power of the hair dryer or bring it to the panel).

If everything was done correctly, then small scratches It will disappear enough quickly, and this can be determined visually.

Elimination of scratches open fire

Liquidation of plastic scratches in the cabin can also be used with open fire (most often used the usual lighter). The process is simple, but requires some skill:

• to eliminate scratches along it, open fire is thrown several times;
• scratches will gradually be delayed, but before cooling the surface should not touch the plastic with their hands in trying to grope damage;
• after exposure to fire on the plastic, a bit of soot will appear, which is subsequently removed by a cotton swab in alcohol.

This method allows you to quickly remove small plastic defects, but it has one nuance: if it did not work out from the first time, it is not necessary to repeat the attempt - a long exposure to open fire on the panel can lead to its deformation and complete loss of a good kind.

Polishing plastic details

If you wish to restore plastic detail Without the risk of its damage you can spend polishing. For this, a special abrasive paste is used, which allows you to painlessly treat the plastic part. The process of removing scratches as this method looks like this:

• first, the damaged surface is wellhed with detergents and dried;
• after that, an abrasive paste is applied to the recoverable area, after which the polishing of plastic is performed manually or with a grinding machine.

For polishing, it is impossible to use the means that are intended for paint and varnish coatings. In addition, in no case can not polish the plastic surface on large turns Grinding machine - Detail can simply melt.

Masking scratches with special pencils

One of the most simple ways Eliminate minor defects on plastic - these are their masking with special pencils. Of course, the cost of such pencils is quite high, but in this case This factor is fully justified by the result.

The principle of masking scratches in this case is very simple: it is enough to apply the composition on those places where defects are present. As a result, the scratch across the depth is filled with a special composition, after which it will be impossible to detect it visually.

The main nuance in such a restoration of the plastic surface is that it is necessary to very carefully pick up the color of the pencil, otherwise a noticeable spot appears on the panel having another shade.

Overhaul plastic

Finally, it is impossible not to mention the most expensive, time consuming and reliable method Recovery - overhaul. The difficulty lies in the fact that for repair, the plastic part is required to be removed from the cabin. Repair is performed in several stages:

• after removing the panel is traditionally washed away from dirt and dried;
• the next step is grinding the surface (if only it is not corrugated);
• next, the plastic panel must be coated with primer, and after drying it with the help of a small abrasive to bring to a smooth state;
• the last step will be painting, with a layer of paint from above it is worth covering lacquer for maximum reliability.

Video: What to remove scratches on plastic in the car

Conclusion

The appearance of scratches on the plastic in the car's cabin is a rather painful topic for many drivers, but she does not tate in itself. Always need to remember that any damage plastic surfaces Amented by eliminating- just pick up enough optimal way Getting rid of scratches and to implement it efficiently. Now we are tetal to the question, how to remove scratches on the car's plastic.

If scratches appeared on the surface made of plastic, then you need to take necessary measures To remove them. If damage has a small depth, then you can try to get rid of themselves. But if they are deep and you have no such experience, you will need help professionals.

Using sandwich

It is necessary to prepare such materials and devices: abrasive paste, grinding machine, sandpaper, specially intended for plastic primer (usually sold in the form of spray), water, clean rag and varnish. To clean the surface from fat stains, acetone will be required.

If possible, then the damaged item you are going to restore, remove from the product. It must be done in order to facilitate the process of cleaning from garbage. Then rinse it. If the paint was applied on top, then remove it with a grinding machine or sandpaper. Processing scratches on plastic. It is necessary that the smooth surface remains. After that, the surface should be treated with acetone. Use other means, but they should not dissolve the surface.

The process of priming the surface of the product will not take much time. Shake a few times the spray and sprinkle to clean the channel. Apply two or three layers, but not immediately, let each layer dry separately.

After drying the primer, polish the surface of very small emery paper. At this stage, we can assume that the preparation of the product is complete and you can start painting. Apply first the first layer of paint, then the second. Do not allow omit. The color should not differ from the already applied to the product.

With the help of abrasive paste and gas burner

Remove the damaged part, rinse and degrease, clean it well from dust or dirt. Removing scratches from plastic make carefully because the result affects appearance.

After cleaning the surface, grind, use sandpaper or grinding machine, do not leave sowing and scratches. Surface trees with acetone or solvent.

Adjust the temperature of 300 degrees on a construction hairdryer, slowly warm the surface of the plastic. Warning should be carried out until you see that the plastic began to melt slightly. In this way, you can remove scratch, but do not allow overheating. Surface clean and polish. Paint the item in two layers, do not allow the appearance of omit.

With the help of special pencils

There is nothing easier and more reliable how to remove scratches from plastic with a special pencil. Pencil acts as well as polyrolol. Scratch fill active substance, then the scratch is free. It is in this way that a special pencil for grout hides their scratch.

When you get rid of scratches on plastic, follow safety techniques. Use gloves and protective glasses. The room should have good ventilation to eliminate acetone vapor or other solvent. When working with a gas burner or construction hairdryer should be very careful and attentive in order not to burn.