When choosing a car, most drivers are guided by the comfort of the cabin, engine power and how much gasoline is consumed per 100 km. However, these are far from the last factors that are important to consider.

It is also necessary to pay attention to the quality of the seats, plastic parts and torpedoes. The poorer the quality, the faster holes, scratches and scuffs appear.

Holes can be sewn up, no one will pay attention to them. But removing scratches on the plastic in the car is a matter that requires special skills.

Professional technology

To eliminate scratches on the plastic, it is better to contact a car dealership, where they will quickly help solve this problem, but for a large fee.Why overpay if you can do everything yourself.

How to remove scratches?Professionals use a lighter, hairdryer, or a special pencil. If you have little experience in masking scuffs and other damage, it is better to use traditional methods.

Lighter

Is there a scratch or chip on the torpedo? Do not panic. Buy a lighter and follow the correct procedure.

So, step-by-step removal of scratches on the plastic of a car using an open fire:

1. Switch on the lighter and pass it along the damaged area 2-3 times. Be careful, too long holdings in one place will greatly melt the material, and then you will probably have to take the car to a car dealership or completely change the part.
2. When sliding along the damaged area, the plastic will melt slightly. Take a toothpick or something else and gently move it to the chip.

That's the whole process. Simple and easy enough that even a woman who does not understand anything about it can handle it.

Then they get rid of the soot formed on the torpedo. Just after the treated area has cooled down.

Hair dryer

You can also get rid of scratches with a hair dryer. Such temperature method ideal for removing cobwebs (minor damage).

Procedure:

1. Plug in the hair dryer and set the airflow to medium. The air must be hot enough for the plastic to melt.
2. Point the hair dryer at a clean area of ​​the torpedo that needs restoration. Run it over the scratched area. Wait for all scratches to heal.

Be careful with this technique and do not use the most powerful hair dryer setting. Plastic panels melt quickly and deform the surface.

Pencil

If the panel is scratched, a repair pencil or napkin will save you. You can buy them at automotive markets or in stores. Famous brands- Displex and Disc Repair. The principle of using pencils is very simple.

They are bottles with special contents inside.

Application procedure:

1. The place requiring restoration should be treated with a degreasing agent, but at the beginning it should be washed well with soapy water and dried.
2. Choose the right shade so that the treated surface does not differ much from the entire panel.
3. Then use a purchased pencil to mask the damage. Drive with a sharp end over the damaged areas. Leave to dry.

After finishing the event, you should polish the treated area.

Folk ways

Removing a scratch on a plastic surface and scuffs can also be done using folk methods.

Polishing work is considered one of the most important processes in recovery appearance car. If you do not want to give money due to the appearance of small scratches, remove them yourself.

Table. How to remove scratches on the plastic of a car using folk methods.

№	Means	How to remove scratches from plastic?
1	Toothpaste	This remedy can be used for polishing plastic parts in car interiors, for CDs, phones. Use regular toothpaste without colored particles, and you will also need clean rags. How to remove a scratch from plastic in a car: Wash the car thoroughly by yourself or. Move the vehicle to a place with a stable temperature. It is undesirable to leave it in the sun. Apply a small amount of toothpaste to the affected area. Take dry rags and polish the desired area. Do this until the scratch is completely sanded. The toothpaste is suitable for polishing the interior, body, headlights and other parts on which scuffs have appeared.
2	Baking soda	Regular baking soda can help restore damaged plastic surfaces. Don't be surprised, it actually works. How to remove scratches on plastic: Mix two parts baking soda with one part water. Fill in the scratch with the mixture. Rub the gruel into the car in a circular motion. Remove residues of the product with a clean, damp cloth. The baking soda will wash off in the rain, no matter how hard you rub it in. If the torpedo is dark, try mixing baking soda with a matching varnish and filling in the damage. It is not recommended to use it to remove scuffs on the side panels, the mixture that removes scratches will begin to crumble over time.
3	Baby powder	If you urgently need to eliminate scratches on the interior plastic, baby powder will save you. It is used in a similar way to soda. You just need to pour over the damaged area and rub in with a clean piece of cloth.
4	Banana and glass cleaner	For this method, you need a banana with a peel. As with toothpaste, this plastic polishing strategy is for minor scuffs and scratches. The method is somewhat strange, but very effective. In our time, nothing can be surprised, you need to take and try. After all, many methods are very cheap and effective, despite their components. How to remove damage on the panel: Peel the banana and cut a piece. Wipe the plastic with the citrus itself. Then take a banana peel, wrap it around your finger and wipe the surface with it. Remove residues with a clean towel. Finally, spray glass cleaner on the plastic and wipe dry. This will restore the shine.

At home, it will not be possible to get rid of deep damage. Such tools help to mask only minor defects, and it is important to know that not for long.

In a few weeks, and if you are lucky, then in a month, you will have to repeat the procedure again or buy a professional remedy so as not to suffer.

Major overhaul

A radical way to remove scratches from plastic is to overhaul (painting and varnishing).However, before these manipulations, several preparatory measures should be performed.

This method is suitable if the surface is very poor condition, it has multiple scratches and scuffs.

Buy 400, 800, 1000, and 2000 grit sandpaper and a cleaner and polish.

First, dismantle the torpedo and take it to the room prepared for work.

Step-by-step removal of scratches on plastic in the car interior:

1. Soak sandpaper in water before using. It usually doesn't need to be presoaked, but this will soften it up a bit.
2. Lightly sand the surface with the lowest grit. Then rinse with water, use 800 grit and continue sanding.

Sandpaper will scrub all dirt off the plastic panel.Then follow preparatory work to a new painting of the car. For a torpedo, buy a special primer, it is sold in cans. Apply it in several layers.

Let the primer dry and use sandpaper again to clean it. Do not use a sander, hands feel better the whole process.Sand the surface to a perfectly smooth finish.

The last stage is application paintwork... Do the work in a clean room so that dust particles are not found on the torpedo afterwards.First, paint is applied, left to dry. Then varnish, you can in several layers.

Leave the torpedo to dry in the sun. Then put the panel back into the interior of the car.

Overhaul removes all scratches and. Thus, you can not only return an attractive look, but also change the color of the torpedo and other panels.

At correct execution any technique, it will become impossible to find the damaged place.

Try to follow all the recommendations as accurately as possible, and follow the advice, and so that scratches do not appear, you should properly care for the plastic surfaces.

During operation vehicle, scratches appear on the plastic inside the car. Defects spoil the view dashboard, and a large number of such damage leads to the appearance of microcracks and destruction of plastic. Knowing how to remove scratches on the plastic in the car, the driver returns to the parts initial appearance, avoids more serious repairs and replacement of damaged elements.

Scratches on the plastic of a torpedo are common. Various objects, or even opening and closing doors, can cause them to appear. This is due to the fact that plastic surfaces do not have a shockproof coating, and the slightest mechanical impact leads to a flaw. Minor defects deep scratches on the dashboard spoil the look of the car interior as a whole. but such damage can be repaired without dismantling the plastic elements.

Direct sunlight causes paint fading on the interior elements of the car. To restore such a part, it will be necessary to overhaul the element.

How to remove scratches on plastic in a car

To remove scratches from plastic in a car, several methods are used:

1. Small defects are eliminated by heat treatment. For this, a hairdryer or a lighter is used.
2. Small injuries are removed with special restorative napkins and towels.
3. Deep defects are painted over with automotive wax crayons.
4. Scratches are removed from glossy surfaces with polishes and abrasive gels.
5. Cracks, chips and deep damage to the paintwork of the torpedo are repaired by overhauling the part.

Repair of grooved surfaces is not possible. They cannot be polished or heat treated. When such elements are worn out, they are replaced with new ones.

Revitalizing pencils and wipes

One of the easiest methods to restore the appearance of a damaged part is to use special tissues, microfiber towels and a pencil to remove scratches from the plastic. However, the use of these remedies that eliminate defects has a number of nuances:

1. Napkins and towels provide an opportunity to get rid of small scratches plastic surface of the car dealership.
2. Deep chips and scratches can be rubbed out with a special pencil. These attachments are sold at auto dealerships. The advantage of such a tool is considered its effectiveness. The substance fills in defects, gives the surface its original appearance. However, take into account that only an original pencil can cope with the problem. Its cost is high, and Chinese cheap counterparts, if the car's torpedo gets scratched, will be of little help.
3. When painting, select the closest pencil color to the shade of the dashboard. Otherwise, after restoration, black traces remain on the surface, spoiling the appearance of the part.

Using a hair dryer

Damage to the plastic can be repaired with your own hands using a hair dryer. Before heating, the treated area is cleaned of contaminants and degreased. After, turn on the hairdryer maximum power and very closely monitor the reaction of plastic to heat. When exposed high temperatures by smoothing out defects, the detail takes on its original appearance.

If there is no reaction to heating with a hairdryer, then you need to increase the power of the device, and bring it closer to the surface to be treated. Deep damage cannot be repaired in this way. Excessive heating will deform the plastic element and degrade the appearance of the part.

Polishes and gels

After removing scratches on the plastic, the part needs to be polished. This is important when repairing glossy interior elements. The means will return the surfaces to their original appearance. For polishing, it is recommended to use an abrasive cloth or sander. Using an electric tool, it is impossible to eliminate defects on maximum speed grinding wheel. The plastic will heat up and deform, leading to expensive repairs.

Also Special attention should be turned to the agent used to restore the damaged area. To protect the material from deformation or destruction, use a special abrasive paste and polish for plastic.

Defects are eliminated according to the following algorithm: before polishing, the surface is washed, dried and degreased. Next, a small amount of the product is applied, and the part is polished until a glossy shine appears.

Remove by polishing small scratches from a glossy surface.

Elimination of damage with a lighter

Using an open flame, remove scratches from plastic. To do this, the lighter is brought to the defect, and the flame is carried out over the entire area of ​​the damage. After the surface treated in this way has completely cooled down, remove the soot with a swab moistened with alcohol. If everything is done correctly, then after such a procedure, the plastic is restored.

Be careful when using a lighter. Otherwise, open fire will cause damage to the skin and fire the vehicle.

Overhaul of plastic

It is not always possible to repair the plastic in the car in simple ways... Chips, cracks, areas of burnt paint - all this requires a major overhaul of the plastic elements of the car dashboard. Recovery is performed in the following way:

1. The damaged part is dismantled.
2. Thoroughly cleaned from dirt, degreased and polished.
3. Cracks and chips are covered with a primer.
4. The surface is polished.
5. Apply paint, allow the element to dry.
6. Cover with several layers of varnish.
7. Polished until a glossy shine appears.

How to properly remove scratches from gloss

In the design of many interior elements, transparent plastic is used. The disadvantage of this material is the rapid appearance of defects: small scratches and chips, after several years of machine operation, literally cover the entire surface of the cabin element. Removing scratches from the plastic of the car interior has a number of nuances:

1. Before carrying out the restoration, it is necessary to carry out a wet cleaning of the car interior. Make sure that there is no dust. Otherwise, new scratches may appear on the surface during polishing.
2. The area to be treated will need to be thoroughly washed and degreased.
3. To get rid of scratches, use a sander.
4. To polish the damaged area, it is recommended to use products that are designed for sanding plastic. These are special polishes and abrasive pastes. It is important to correctly calculate the amount of the applied substance.

Abrasive pastes, gels and polishes that are intended for polishing the car body must not be used when restoring the interior. They will damage the part being restored.

Numerous defects, scratches, chips and cracks spoil the look of the car's torpedo. Damage of such a plan is easy to repair yourself. To make the repair process effective and not lead to the replacement of a part, take into account the nuances of restoring the plastic elements of the interior.

10/29/2016 5 77 038 views

Surfaces of all kinds of plastics surround us. They are comfortable and practical, but they are prone to deformation. Therefore, the question of how to polish plastic from scratches is always relevant. In order for your favorite smartphone, window sill or TV to retain its attractive appearance, you need to read our tips and, using simple steps, turn them into almost their original appearance.

It is enough to look around to see how indispensable plastic has become in everyday life. It is made of it: Appliances, communication equipment, kitchen utensils, car parts, decoration materials.

This material is lightweight and cheap, easy to operate and unpretentious, as well as resistant to temperature fluctuations. The only drawback is the relatively low density, which is a consequence of the appearance of scuffs and scratches on it. Because of this, it is too expensive to change the entire product.

Preparation

Getting to work, you must first of all decide what we are actually going to do and what available means. Polishing is not difficult, it is only important to know how. To begin with, you should understand that jack of all trades distinguish at least three different kinds such actions:

1. Thermal (using a hair dryer).
2. Chemical (that is, acting on plastic with toothpaste, polish or GOI paste).
3. Mechanical (using a drill or other polishing machine).

Initially, we estimate how great the damage caused, and based on this, we choose the method of further work:

1. Remove scratches from plastic by hand polishing.
2. Deeper damage can be overcome using heat.
3. The coating is chemically treated to its perfect shine, and your headlights will shine like new.

When the future strategy of action is determined, it remains to carefully prepare the product for work. Using the most conventional means for washing dishes or cleaning glass, you should carefully remove accumulated dirt and grease stains. Surely the plastic has a frame made of a different material. These places are pasted over with masking tape, which will be removed after the end of the work.

Plastic sanding

This method mechanical processing plastic surface is used if there are deep scratches that cannot be effectively removed in any other way. The material lends itself well to grinding, having low temperature melting. As a result of leisurely, careful work, we should get a uniform matte surface where there were deep scratches before. Here is the subsequent range of actions:

• we place the previously cleaned material where it will be convenient to work with it;
• preparing workplace, we remove all unnecessary items;
• we take several waterproof skins of various textures as a processing material;
• a special grinder is useful as an auxiliary tool;
• if there is no machine, then it should be borne in mind that grinding with soapy water gives a good effect.

We begin the work using a skin that has a large texture. Grinding is not a hurry; accuracy is required. We process the product in a slow mode, monitor the temperature, it should not overheat. We methodically move from the coarse texture of the skins to the finer ones. After using each of them, wipe the treated area with a dry cloth, this allows you not to miss the remaining flaws.

How to polish plastic from scratches yourself?

There are several ways, using which, removing scratches and scuffs will cease to be an impossible dream. At home, with the help of simple devices, you can make a shabby product perfect with your own hands.

If the plastic surface that your kitchen table has has stopped sparkling and is covered with scratches, then it will not be difficult to polish it to its original shine.

The same method will allow you to make the window slope as textured as it was several years ago. A few hours of focused work will save you a lot of money.

Manual polishing

After getting rid of scratches, it's time to move on to the next laborious process - polishing, making old part almost new. Services involving the removal of scratches are widely provided by car and cellular dealerships, as well as specialized cleaning companies.

They are not cheap, the same work is easy to do with your own hands. After all, special tools and devices that are used by professionals are sold in all car dealerships. The main thing when choosing a polishing paste: do not forget that we will process plastic; in order not to overshoot in the choice, you should consult with the seller, who will give professional advice.

By the way, GOI paste has proven itself well with the chosen processing method. It should be familiar to those who served in the army and washed a belt badge. With this tool, you can ideally polish objects that do not pretend to be pristine transparency.

If we are talking about a TV that has scratches or a phone that has serious abrasions, then it is better to use special pastes. They may be more expensive, but the effect will be desired.

Manual polishing:

• optimally processes small parts and small surfaces;
• we take a homogeneous paste, impurities and grains are excluded;
• oil will give a special gloss;
• apply the paste to the surface with felt or felt
• we use circular motions;
• the hand goes easily, the pressure is not great;
• the whole process takes 15 to 20 minutes.

We use a polishing machine, which in the most budgetary version consists of a drill with a special attachment:

• an inexpensive polishing pad is sold in the store;
• the best application of such a machine is the surface of the headlights;
• a good economy is provided by replacing the nozzle with a piece of ordinary felt.

This material requires solid fastening so that it does not fall off.

Polishing treatment

Do not forget about polish among the products purchased in a specialty store. With its help, the result of your work will be glossy plastic, no different from the one that we purchased in the store. The technology of work is as follows:

1. The product is applied to the surface in the form of a small uniform layer.
2. It is necessary to thoroughly grind it with a special cloth or attachment.
3. Then, in fact, the process of work begins, by which the required result is achieved, the plastic will bring the polish to a mirror shine.
4. If the surface of the phone is polished, then, exposed to periodic exposure to moisture, the transparent plastic loses the achieved result over time, and the process should be repeated.
5. Repetition is necessary in any case, if you see that your plastic is again black and worn.

Conclusion: to avoid frequent updates, protect household items from moisture.

Using a polishing machine

It is quite professional tool, allowing you to bring the restoration of the product to the ideal process. Such a tool is useful and convenient. It is especially recommended for motorists who from time to time perfect the headlights of their car, as well as its plastic surfaces. The main convenience lies in speed, a volume of work is done in a few minutes, which will take manually, perhaps more than one hour.

The consideration that guides a person acquiring such a technique is the need to put things in order from time to time in his household... Such a polishing masterpiece is not so expensive, it is available in stores selling power tools.

Several nuances that should be observed in the process of using the tool:

• before using special tools, it is necessary to remove the remnants of dirt with a damp nozzle;
• when the action is nearing the end, one of the special pastes purchased in the store is used;
• a special foam nozzle will help to create a special gloss on the product.

The entire method takes a few minutes.

Video: how to polish plastic from scratches with a polishing machine?

Hair dryer

Another pretty original method getting rid of scratches is to use the most ordinary hair dryer. The meaning of the method is simple: plastic reacts vividly to sudden changes in temperature, therefore heat treatment is in the best way"Heal wounds" on the surface of your phone.

Two types of tools are used for work: a conventional hair dryer used to dry hair, and a special building unit.

1. Before work, dirt is removed from the plastic.
2. It is best to start the process with minimum power.
3. We direct a stream of hot air to the required area.
4. If scratches persist, the power must be gradually increased, but without fanaticism.
5. The main expected result is that the area with scratches has acquired a matte base, and they themselves are gone.
6. After cooling down, the plastic starts to polish.

Toothpaste

In some cases, there is no need to purchase expensive products. As practice shows, such improvised means as ordinary toothpaste can serve as an abrasive for polishing the same headlights. Despite the low cost and extreme availability, the gloss of the surface, in the end, turns out to be no worse than when using a proprietary product from a specialized store.

The principle of working with this tool:

• we get rid of dirt with the help of detergents;
• the composition of the product must be neutral;
• after degreasing, the product is washed and dried;
• the paste is applied to a piece of flannel;
• circular movements, clockwise or counterclockwise;
• it is periodically necessary to wash off the resulting gruel;
• the remaining paste is best removed with a damp sponge.

Obviously, using simple methods and a budgetary arsenal of funds, you can save significant money and get a truly brilliant result.

5 methods for polishing plastic from scratches and scuffs

4 (80%) 2 votes

How to remove scratches from plastic, interests every person, I assure you! In every house, in every family there is a huge number of plastic things that you use every day. The outer casing of the refrigerator, household appliances, a mobile phone, even the interior and bumper of a car are all made of plastic. Therefore, today's article will be of interest to absolutely everyone - from housewives who are puzzling over how to restore the former shine to the refrigerator cover, to avid motorists who want to remove a scratch from the bumper with their own hands.

On modern market There are many tools available to remove scratches from plastic material, but they are only effective when the damage is not too deep. The most common ones are:

• polishes for removing scratches;
• special pencils;
• paste for filling damage.

Lovely hostesses and their attentive husbands, you need to use these funds strictly according to the instructions. These funds can be colorless and colored.

If the scratch is quite deep, then it is better to choose a colored product, since the depth will need to be filled with a suitable shade.

Remember that a deep scratch often looks lighter than the main background, so don't put off this "operation" until tomorrow. It is better to fill in and paint it in a timely manner.

And now useful information for your husbands, and for you, of course, lovely ladies, if you are happy owners of a car! Minor damages and scratches are best removed with car body polish. They may be:

• rough, with a texture with abrasive particles;
• finishing, with a soft silicone texture.

So, for plastics that are used in everyday life, choose only finishing polishes so as not to further damage the restored surface.

Any product you choose is applied to the damaged surface with a soft flannel cloth. Perfect for this mission the usual diaper.

And now I want to tell you about a little trick. Extreme craftsmen remove scratches with a lighter. “How is this possible?” You ask. And here's how: the flame of a lighted lighter should be brought to the scratched area, but no closer than 5 - 8 mm, well, then very carefully and with jewelry precision lead the flame along the scratch. The plastic will melt a little and thus tighten the scratch. If you managed to "sew up" the scratch in this way, then do not touch the plastic element for about 30 minutes: let it cool down well.

If the scratch proudly "flaunts" on the torpedo of an elite and expensive car, then it is better to contact the service for help, especially since many now have a "scratch rubbing" service.

We remove scratches in the car interior

It is possible to remove scratches from plastic in a car even at home. Every driver cares about the appearance of the car's interior no less than the serviceability of the engine. Therefore, for every owner or owner of a car, the following information will be very useful. Thanks to these methods, you can effectively remove scratches from the plastic in the cabin and avoid replacing damaged parts.

Depending on how deep the scratches are and on what surface they appeared, there are the following ways to fix the problem:

• using a hair dryer;
• masking small scratches with polishing agents;
• polishing scratches with a special pencil;
• thorough repair of the plastic element.

For surfaces with a relief texture, you can use only the last two methods, since others will only aggravate the situation and spoil the appearance of the plastic.

Well, expensive motorists, go:

1. We remove scratches with a hair dryer. A well-known hair dryer can effectively remove minor scratches from plastic. Moreover, you can use both a regular hair dryer for drying hair, and a construction one. The algorithm of action is very simple: when the plastic is heated, small scratches and defects heal on their own due to slight melting.

In order to remove scratches from the torpedo, you must first thoroughly wash the plastic using detergents... This will remove accumulated dirt and dust from scratches, and heat damage will heal faster. When the panel is dry, turn on the hair dryer to minimum power and direct it towards the area to be refurbished. If there are no changes, you can increase the exposure temperature so that the plastic begins to melt a little. It is not recommended to keep the hair dryer at one point in order to avoid excessive heating of the plastic. If you do everything correctly, then the damage will heal right before your eyes or will noticeably improve, and it will be easier to remove them by polishing in the future. Only after the plastic has completely cooled down, it will be possible to touch it.

2. We remove damage by polishing. The safest and easiest way to remove scratches in a car interior is to polish with special abrasives.

Those pastes that are intended for paint and varnish surfaces cannot be used: purchase only those that are specially designed for soft plastic.

You can polish with a grinder, while you should be careful that the spindle is set at minimum speed. If this is not available, then polishing can be done by hand. It is so easy that even you gentle hostesses can do it.

Removal of scratches occurs in the following sequence:

• • wear rubber gloves and start washing plastic surface detergents. Pay special attention to those areas where there is old dirt and a lot of dust;
  • it is necessary to thoroughly dry the restored surface;
  • after that on small scratches and damaged areas an abrasive paste is applied. Use a small sponge or a piece of foam rubber to apply the product to scratches. In order for the paste to begin its action, it must be given some time, which is described in the instructions for use.;
  • when will the pasta get White color, the polishing process can begin.

Tepe Wipe off the remaining abrasive paste in a circular motion, periodically removing the resulting dust. Upon completion of the "plastic surgery" in the interior of your car, the plastic surface must be thoroughly washed, but you must act carefully and carefully so as not to create new damage and scratches.

3. We use a masking pencil. This is perhaps the fastest and easiest method for masking scratches in the interior and on the bumper of a car. I cannot call this method a budget one, since high-quality pencils are quite expensive. But they are enough for a long time, so you can safely spend it once, especially since such a restoration in a car dealership will not be cheaper.

This pencil is filled with a special compound. With the right shade, the content of the pencil fills in the scratch and it just becomes invisible.

Often the panel is standard black or gray, making it much easier to find the right pencil shade.

Removing scratches from plastic is as follows:

• • damaged areas are thoroughly cleaned of all kinds of contamination;
  • dry well;
  • scratches and defects are filled with the sharp part of the pencil, time is given to dry;
  • after that, you can remove excess pencil content and start polishing - this will smooth out the sharp transition of the restored area and the main surface of the panel.

4. Overhaul and removal of scratches from plastic... The most difficult and time-consuming method of restoration of a plastic surface in a car is painting. But it is this method that will effectively hide all the flaws and defects. Moreover, thanks to this, you can change the interior of the car by changing the color of the panel. Therefore, even this laborious process has its advantages.

The first step is to remove the damaged part, since this is the only way you will not damage the upholstery and the integrity of the windows. The plastic part is removed in accordance with the instruction manual given by the manufacturer.

Now I suggest you, lovely motorists, as well as their husbands, who will do all this, to consider in more detail all the stages of work:

• • the part from which it is necessary to remove all scratches, we thoroughly wash and remove all dirt using detergents;
  • the next step is sanding the damaged surface, but if your panel has a relief structure, then in this case it does not apply;
  • if the panel has a smooth surface, then it can be sanded with a special machine or manually using sandpaper;
  • then the prepared surface is covered with a special primer, which is sold in spray cans. Be sure to choose a primer that will not react with plastic.;
  • after you have applied two coats of primer, the surface should be treated with a fine abrasive until perfectly even;
  • if there are deep damages on the panel, then they must be repaired with putty;
  • upon completion renovation works the surface of the panel is covered with the selected color. If you wish, you can treat the plastic with varnish, but in some cases it can create glare and interfere with driving.

Now, you know about all the tricks and methods that will help to effectively remove absolutely any scratches in the car interior, as well as from the bumper. From now on, when new scratches appear, you can easily decide what to use in this case: a corrective pencil or again ask your beloved husband to make a small "repair" and repaint the panel in a color that perfectly matches your new coat.

Removing scratches from the plastic of the phone

It is not surprising that various defects appear on the mobile phone, since we use it every day, so now I will tell you 10 secrets that will help remove scratches from the plastic of your phone.

I want to warn the owners of expensive smartphones or tablets right away that making such experiments with the sensor is a risk, anyway! Therefore, I recommend carrying out such manipulations only if you are confident in your strength and dexterity.

Do not forget that before starting work, you should protect all the connectors of your gadget from moisture and other means that we will use for this.

So, dear readers, I propose to consider the basic recommendations and secrets that will help remove scratches from the plastic and the phone screen.

The agent used	How to apply?
1.tooth powder or paste	In order to remove scratches from the plastic cover of the phone, as well as some screens, you can use regular toothpaste. "How is this possible?" - you might think. That's how: Apply a small amount of good toothpaste or diluted tooth powder to small scratches on the screen or plastic; in a circular motion "rub" the paste into small lesions; wait a while until it dries; moisten a cotton pad with water and wipe off the plastic or screen. You will find that small scratches are really invisible. But if deeper damage appears on the phone, then this method will not work.
2 baking soda	Regular soda, which every housewife has in the house, will hide minor scratches: dilute soda with water to the consistency of thick gruel or sour cream; apply the resulting product in a circular motion on the scratches of your phone; then wipe off excess product with a dry cloth and wipe the damaged area dry.
3 baby powder	The algorithm of action and the method of preparation of the product is similar to the case with soda.
4.Any vegetable oil	Many people claim that oil can remove even the deepest scratches. But based on personal experience, I can argue that it fits this method for minor damage only: apply one drop of oil to the damaged area; rub it in until the area is covered with a pleasant shine and the greasy stain disappears. This tool will hide small scratches only for a short time, it is rather a corrective "cosmetic" tool.
5 car care products	Any polish you use for your car can be used to remove scratches from the plastic of your phone: apply the polish to the scratch; using a dry cloth, polish the damaged plastic until the scratch is less noticeable. That's all! The principle of action is similar to the previously proposed means.
6 furniture polish	Even furniture polish can be used to remove scratches from plastic and your phone screen. To do this, apply a small amount of the product to a cotton pad and rub over the area to be repaired until the scratch is out of sight.
7 emery paper	No matter how strange and terrifying it may sound, many experimenters argue that it is sandpaper with the least rough dusting that can remove small scratches from plastic and even a touch screen. If you can't believe it, then you better not try this method on your phone.
8.Pasta GOI	Even in the days of our grandmothers, GOI paste was often used to polish various surfaces. This product contains a small amount of abrasive substances and is used for polishing ceramics, optical glasses and, as modern experience shows, for plastics and touch screens. But lay great expectations it is not worth it for this remedy, since it is able to remove small scratches and even then not for a long time.
9 display polish	Whatever one may say, but a specially developed composition of such products perfectly copes with the problem of scratches on the screen and plastic mobile phones and other gadgets. Such means, of course, will not remove a deep scratch, but minor defects will perfectly hide.
10 suede	On the Internet, you can find the statement that a piece of suede can permanently remove scratches from your phone! But this material, like all steel, is only able to hide minor damage, but nothing more.

I want to sum up that all these tools can really effectively deal with minor defects and remove scratches from the plastic of your phone. But they will not be able to cope with deep damage. Therefore, I would like to give you advice, dear readers: if significant damage has appeared on your phone, it would be more expedient to contact service center... Well, to mask minor defects while you are going to go there, you can use these means. Good luck and be as careful as possible!

Elimination of scratches on the plastic of glasses

Small defects can be removed with the help of such improvised means:

1. Polish for silver and copper products. To remove minor scratches, simply apply this product to the glasses and wipe with a dry cloth or fiber cloth. This procedure should be carried out until the scratches have completely disappeared.
2. Wood polish + Vaseline. Purchase a special wood polish from a household chemicals store. It is enough to treat the lenses of the glasses with this tool and add a few drops of petroleum jelly to each. These products will fill in damaged areas and make them less visible. The damaged plastic of the glasses should be polished until the petroleum jelly is completely wiped off. When the scratches are out of sight, you can finish polishing.
3. A special tool for computer office equipment. This tool is usually used for computer disks because it perfectly removes all kinds of scuffs and minor scratches. It should be applied to the plastic of the glasses using a soft fiber.
4. Wax. You can effectively polish plastic glasses with wax. Apply a small amount of wax to a dry, soft cloth and rub the lenses in a circular motion. Residues can be removed with a dry cloth or cotton pads.
5. Glass cleaner. You can use a glass cleaner in your car to remove a scratch from the plastic of your glasses. Apply the product to glass and polish with a dry cloth. It will perfectly remove small scratches and prevent glasses from fogging.
6. Glass abrasive. A similar tool is used in painting and is the only remedy that will remove all scratches, not mask them. This abrasive contains hydrofluoric acid, so it can only be used if your glasses are made of plastic.

If your glasses have an anti-reflective coating, then be prepared to part with it using an abrasive. When using this product, the acid will remove any coating, but the plastic lenses will remain intact:

• put on rubber gloves;
• lower glasses of glasses into a container filled with this abrasive;
• wait a few minutes;
• rinse the lenses with cool water;
• all items that have been used and that have come into contact with the abrasive discard immediately.

Although the anti-reflective coating has disappeared from your glasses, now they are not even a single scratch, and their visibility has improved significantly!

Now that's it! All the tips and tricks that I knew, I told you everything. Now you are a real pro in the field of removing scratches from any type of plastic and from any things! From today on, such an unpleasant problem as scratches on plastic will disappear from your life forever! And you will enjoy yourself with a smile bright moments while looking through the updated lenses of your glasses and while driving your "refurbished" car.

In this article, we will show you how to remove a scratch from plastic in a car.

Scratches on the plastic panels of the interior and body of the car cause a lot of discomfort to the owners. Many car enthusiasts simply do not like the fact that passengers who get into their car may notice scratches and feel that the owner does not take good care of the car. In addition, scratches on the plastic impair the visual appearance. When selling a car, buyers can claim a discount for scratches on plastics. In this article, we will show you how to remove a scratch from plastic in a car. We will tell you as many as five ways of this simple work.

Types of damage to the plastic of the car interior

Damage to plastic parts in a car can be roughly divided into several types:

- minor scratches on the plastic;

- deep scratches on the plastic;

- the result of exposure to direct sunlight.

The table below describes the types of damage to plastic in a car.

Plastic damage type	Description
Small scratches	The most common damage to plastic in a car interior is minor scratches. This defect most often manifests itself in the appearance of many small scratches. They can form a whole web of scratches, which. which will greatly spoil the look of the cabin. Small scratches are easiest to remove or mask from the surface of the plastic. For this, special means are used. Repairing minor scratches will be inexpensive and can take a fairly short amount of time.
Deep scratches	The second type of damage to the plastic inside the car is deep scratches. They appear less frequently than small ones. It takes longer to eliminate them. Not suitable for many deep scratches simple methods deletion, even with special means... Therefore, you need to resort to cardinal methods, which we will describe below. Using a unique method, such deep scratches on the plastic panel in the car interior are removed and leave no trace of themselves. This effective method will help you avoid the costly replacement of the entire plastic part of the car interior.
The result of exposure to direct sunlight	To the next type of plastic damage car showroom include the effects of exposure to direct sunlight. Ultraviolet radiation quite strongly affects the plastic of the torpedo, from which the torpedo becomes dull and loses its original color. If, in addition to this, there are various scratches on the plastic, then the appearance of the interior immediately deteriorates. Such a complex plastic defect in the car interior can be removed only by overhauling the surface.

We should clarify that removing scratches on the plastic of a car's interior is a rather difficult task. The more corrugated the surface of the plastic, the more difficult the methods for removing defects will be. In such cases, you have to resort to overhaul plastic surface.

The main ways to remove scratches on the plastic of the car

The choice of method for removing scratches from plastic depends on the type of surface and the complexity of the scratches. Repair and removal of scratches can be done in the following ways:

- removal of scratches with a hair dryer;

- removal of small scratches by polishing;

- masking of defects with special pencils;

- smoothing the surface with a source of open fire;

- overhaul of plastic, which includes cleaning, priming and painting.

The corrugated surface of the plastic allows you to apply to itself only the masking of defects with a special pencil or a major overhaul of the plastic. Other ways to repair the grooved plastic surface can only worsen the appearance of the car dashboard. For all other types of plastic panels, any method of repair and removal of scratches is possible. In any case, the result of the work depends on the diligence of the contractor and the type of scratches that appeared on the car interior panel. Below we will tell you more about each method of removing scratches.

Elimination of scratches on plastic with a hairdryer

A regular hair dryer can help remove minor scratches or even cobwebs of scratches from the plastic panel. In this method, you can use not only an industrial hair dryer, but also an ordinary household hair dryer, since even the power of a household hair dryer is enough to remove shallow scratches... The principle of surface restoration with a household hair dryer is quite simple. We heat the plastic panel with a heat gun, from which the mesh of scratches is tightened, or they become almost invisible due to the fact that they are reduced in size. To eliminate minor scratches on the dashboard, we must first thoroughly clean the dashboard surface with detergents and a wet rag.

We heat the plastic panel with a heat gun, from which the mesh of scratches is tightened, or they become almost invisible due to the fact that they are reduced in size.

This principle is that the scratch gets rid of the dirt that has stuck in it, which will contribute to the quickest tightening of the scratches when they are heated. As soon as the surface of the dashboard is dry from our wet cleaning, we turn on the hairdryer to medium power and direct a hot stream of air to the area with small scratches. However, we do not keep the switched on hair dryer constantly in one place of the plastic panel, we need to evenly drive it around this place so that the heat is distributed over the entire surface of the plastic panel. This will prevent the plastic from overheating. Directly before your eyes, small scratches will begin to heal or they will become less visible, which in the future will allow them to be removed with the help of regular polishing. After warming up the plastic panel with a household hairdryer, we need to wait until this detail has cooled down, only after that it will be possible to touch it.

Removing scratches from plastic with a lighter is quite similar to the previous heating method with a household hairdryer. In this case, we use open fire. We need to bring the lighted lighter to the plastic panel, on which there are not deep scratches, for a fairly short time. We run fire several times along the scratch. You need to be extremely careful when driving a lighter on plastic. It would be best to first practice performing this repair method on an unnecessary piece of plastic with the same structure as the panel in the car. After some time after applying a lighter to the scratches on the panel, we will see that the scratches will either decrease in size or tighten. Until the panel has cooled down, do not touch it. If the use of a lighter did not help to remove the scratches, then it is better not to use this method anymore for this plastic structure. You should try another method for removing scratches.

We need to bring the lighted lighter to the plastic panel, on which there are shallow scratches, for a fairly short time.

Polishing scratches on the plastic of the car

The most effective way to eliminate small scratches on plastic is to polish with a special abrasive paste, which is designed for plastic parts. Be very careful not to use abrasive paste on the paintwork. Such a paste can ruin the soft structure of the plastic panel. In addition, do not use a sander to polish the plastic in your car, as this can cause the plastic to melt and deteriorate the appearance of the panel. Manual polishing will not take you much time, use it. The plastic is polished as follows. First, we wash the plastic panel from all types of dirt using various special detergents. After that, we give the plastic panel time to dry. Next, we apply an abrasive paste to the plastic surface using foam rubber. We wait a few minutes and start polishing with a special rag. We have to polish the surface of the plastic with an abrasive paste until it disappears from the surface of the panel.

We apply an abrasive paste to the plastic surface using foam rubber. We wait a few minutes and start polishing with a special rag.

Using a special pencil to mask scratches on plastic

Currently, there are special pencils on sale for masking defects in plastic panels of the car interior. This method scratch removal is not cheap. Since quality pencils are quite expensive. A special pencil for masking scratches is a bottle with a special composition. By applying a special compound to the scratch, we fill in its depression, and thus it disappears from view on the surface of the panel. For greater effect, we need to choose the right shade of the color of the special pencil so that it fully matches the shade of the plastic. To use a special marker for masking scratches, we will also need to clean the plastic panel from all types of dirt, using special detergents and rags for this. Next, we start to drag the sharp end of the marker along the outline of our scratches. After the traces of the marker have dried in the indentations of the scratches, we need to lightly polish the surface of the plastic panel.

Overhaul of plastic panels

Overhaul of plastic panels includes painting and varnishing. This type of repair is quite complex and expensive. However, with the help of it, you can achieve complete removal of all defects on the plastic panel. In addition, we can achieve the desired effect - change the color of the panel to the one we like best. To paint the plastic panel, we need to take it out of the car. To do this, we use the instruction manual for a specific car model. Next, we clean the plastic panel from dirt. After that, we sand the panel with the finest emery paper. Next, we coat the surface of the panel with a spray primer. The primer is applied in two layers. Next, we sand the surface of the panel with sandpaper until it is perfectly smooth. After that, paint and varnish can be applied to the panel. Next, we let the panels dry in the sun and put them back in the car interior.