In the course of operation, plastic parts of the cabin lose their original species, rubbed, covered with defects. Fix it will help the masters of the company "AutoCartery". We are professionally engaged in restoration and painting plastic salon on customer cars.

We always manage to achieve a stunning result. To do this, we not only use our experience, but also choose consumablesProfessional equipment. We always find an individual solution for repair and painting of plastic salon, combining all available methods.

Name	Cost
Repairs plastic elements Salon
Repair scratches	from 1000 rubles.
Crack repair (up to 3-5 cm.)	from 1500 rubles.
Tinet parts (with the removal of the former paint)	from 1000 rubles.
Repair of drilled holes up to 1 cm	from 1500 rubles.
Restoration of missing parts of plastic	from 2000 rubles.
Removing the consequences of traces of flavoring	from 1000 rubles.
Removal of superclouting traces for 1cm²	from 500 rubles.
Repair of fixtures of parts of the cabin elements	from 500 rubles.
Painting Steering and Pens CPP
Painting steering wheel	from 2500 rubles.
Painting Rray Steering (Easy Curl, Scratch, Zadira)	from 1000 rubles.
Painting gear handle with repair	from 700 rubles.
Painting seats
Painting seats with repair	from 2500 rubles.
Restoring damaged Kant on the seat	from 1500 rubles.
Painting torpedoes, armrests and door trimbs
Repair of lung damage on torpedo	from 1500 rubles.
Repair and tints of the skin, leatherette car interior
Scratch on the seats or trimming doors	from 1000 rubles.
Small jackets on the region up to 10 cm (leather, leatherette)	from 2000 rubles.
Cut on the seat	from 2000 rubles.
Repair of the front of the seat or single seating	from 5000 rubles.
Repair of armrest	from 1600.
Loss removal 1 element	from 1200 rubles.

Removal scratches with plastic car interior

Over time, many plastic parts of the salon lose their original appearance even with gentle operation. They are covered with micro-soles from nails, keys and solid items. All these problems are easy to solve - you just need to perform polishing.

The procedure is performed as follows:

• the processed surface is cleared of dust and other contaminants;
• with the help of a film and adhesive tape, bordering parts are protected;
• the polishing paste and the machine are prepared.

Then during the three-step processing, scratches are removed on plastic. First are filtered deep and medium scratches, and then eliminate small defects And finish treatment is carried out. After that, the remains of the paste are removed, the result of the work is estimated. If everything is in order - the car is transmitted to the owner.

In terms of price level. Applying a polishing machine for repairing scratches on a plastic of a car - most available way problem solution. However, it is not always coming. For example, if the item burned out or it is damaged by a layer of paint, a more complex repair method is used.

Painting plastic car interior details

This is a complex repair method at which complex computer equipment is applied. Without it, it is almost impossible to return the initial type of detail. That is why it is very difficult to paint the car's plastic painting.

At the first stage, the surface is cleared of contamination, degreases and grinding manually or using the machine. It provides more high level adhesion. Then there is a selection of the correct column of paint using the computer.

The process of restoring the plastic of the car's salon by staining is best carried out in a special chamber. This will exclude dust and soda in an unlucky paint layer. If necessary, the part is also covered by layers of matte or glossy varnish.

When our master completes the work on the restoration of plastic, painted parts, after they are installed in the car, perfectly fit into the interior. They will return to the factory state.

Restoration of plastic car details

If you have noticed deep plastic on the salon plastic mechanical damageThat cannot be eliminated with polishing or staining, do not rush to order new details. You have the opportunity to save, ordering the restoration of the car panels. This is very difficult processwhich may also require the use of polishing pastes and staining surfaces.

The surface preparation process is standard: the damage zone is cleaned and degreases. During the restoration of the car plastic, their appearance is filled with a special material. Professional helium-plasticizers are used in the company "Auto Farpina".

The final stage of the restoration of the car interior is the removal of excess material, surface alignment and, if necessary, polishing and painting the part. The master is seeking such an effect in which the place of damage will not be detected.

Do you still want to try yourself remove scratches from plastic car interior? You will have to prepare everything you need in advance:

• gel plasticizer;
• properly selected paint;
• polishing machine;
• pastes with different graininess.

Also be prepared for what you can spoil some details by negligence. They will have to be replaced. It will take additional funds.

If you appreciate your time and want painting of plastic car to be performed quickly and professionally, it is better to immediately contact the company "AutoCartery". Choose a convenient time, write down and come to us!

The world's first cars almost completely consisted of metal. Now, the situation is different. Very many details modern car From plastics. Plastic products, whether in a car or in any other device, have the body break, crack, bent, melt, deform. In this regard, new technologies for the repair of plastic parts of the car are created.

Why so relevant and important to learn how to repair plastic parts of the car with your own hands? Because, in addition to the high price, plastic products are harder to buy, in most cases it is necessary to order and shack the order.

Before learning to repair automotive parts from plastics at home, you need to understand the terms corresponding to this topic. It:

1. Plastic or plastic mass - This is a substance called the polymer, which is a binding on its consistency. The properties of plastics differ by adding stabilizers, pigments, plasticizers to the polymer, and so on.

Plastic masses are divided into:

• thermoplars
• reactoplasts.

Automotive bumpers are made of both types of plastics.

2. Polymers (Greek origin Polys-many, MER-share) - These are substances in which the structures of molecules consist of identical repetitive links.

3. Thermoplastic or thermoplastic plastic - This is an interesting type of material that is capable of melting many times. A feature of this type of plastic mass is that it can be repaired using welding by melting.

4. Reathoplast or thermosetting plastic mass - This is the material in which resistance to high temperature is lost during irreversible chemical reactions during casting. Such material can withstand aggressive fluid, solvents. Repair and restoration by welding reactoplast is not subject to repair.

5. Adhesion (from adhasio adhesion latice) - This is a material that can be held on another material due to its chemical composition by mechanical or temperature effects. Adhesic substances include glue, which can be held on steel, tree and other materials; Lucky, paints.

Damage to automotive plastic products:

1. Scratch - These are not through defects that are created by a foreign subject. Divided into deep and superficial. Superficial belongs only if the plastic paint is seeded, for example, in the car's cabin panel. Deeply belongs if the structure of the material of the part is set.

2. Dent - Types of deformation that appear by force of force such as pressure, bending.

3. Cracks - Through types of damage. With constant shock repair of cracks, plastic parts, as well as details from other materials, continue to increase.

4. Breaks - Through non-linear damage under which pieces of parts are laid out.

To repair plastic products of the car and not only, in most cases, apply repair methods with gluing and thermostrem.

Repair heating

To eliminate such defects, as dents fits repair with heating. The essence of such a repair is to heat the plastics in places of dents to the temperature not more than 200 s, and gently squeeze, straightening the surface. This method of recovery is best done immediately and do not postpone for many months. Then it will be harder to restore the surface close to the original.

Gluing repair

Gluing can be repaired thermal paste and rectoplasts. Special glue is used, which, after drying, turns into polymeric material. For quality repairs Plastic products gluing need to choose the right glue. For example, when gluing the bumper machine, seam made of glue should be close to the physical properties of the material of the bumper.

Repair welding

The method of restoring parts from plastics by welding is reliable. The essence of it is without the intervention of foreign materials to combine broken surfaces and make a homogeneous one. Welding is suitable only for thermoplastic.

Repair of cracks of parts of car welding consists of stages:

• 1. Clean the surfaces on both sides from the future surface seam at a distance of up to 15 mm.
• 2. Drill holes at the ends of the crack so that the crack does not increase.
• 3. The seam edges are attached to form V, cutting the corners.
• 4. Heat a professional suture area.
• 5. Connect the two parts to be welded. Connect by grab. That is, after a certain distance, seam is heated and connected. After that, they spend complete welding throughout the seam.

Reliability boil on both sides. After that, they carry out the finishing processing and color. After with your own hands, at least one time you can save, weld plastic products, you will do it in a few minutes.

Penalty table from September 1, 2013,

Plastic parts in a car quite a lot. The vulnerability of this material leads often to their breakdown. The strength of plastics does not correspond to a high price for such products, buy them, even under the order, quite problematic. But there is an opportunity to repair the item and fully restore it in our technical center K2.

Should know that repair plastic details In warm time, it is necessary to be made immediately. Due to the fact that at high temperatures, the initial shape of the products will be made much more complicated.

Methods for repair of plastic products

In the manufacture of plastic parts apply different kinds Plastics: polypropylene, polyurethane, reactoplasts, thermoplastics, polycarbonate, fiberglass, etc. Different plastic products can obtain such types of damage:

• cracks;
• dents;
• breaks;
• scratch.

The method of repair is determined by the type of damage and product material. The error-free definition of the type of material is the key to high-quality plastic repairs. There are such methods for repairing plastic products:

1. Heating. Designed for repairing thermoplastic, namely, to eliminate dents on the details. Thermoplasty is made mainly bumper, headlights and various details Body.

2. Bonding. This method replaces reactoplastic and thermoplastic parts. Thermoreactive (reactive) is repaired exclusively with gluing and cannot be welded because they transfer irreparable changes during manufacture.

3. Welding. A more common method, thanks to the reliability, which is tested by time. Thermoplastic parts can be glued together, but welding will provide them with higher strength and stability.

Some elements made of plastic can be repaired solely in one way, but there are those who are immediately repaired at several methods. For example, it is possible to repair the bumper only with welding.

Plastic Repair Equipment

Compliance with the exact technology and the use of specialized tools is important in achieving high-quality plastic repairs and in the further restoration of the functionality of the part. Therefore, by defining the type of plastic and the method of its repair, you should familiarize yourself with the nuances of the repair technology and to comply with all the rules.

Not every type of plastic can be welded with a hairdryer, because different types Plastics require their heating temperature to be soldered. For welding one required heat From 500 o C, for such a soldering iron. With incorrect heating when exceeded permissible norm Temperatures, the location of the eliminated defect becomes fragile, and the seams are very noticeable and can soon dispense. Therefore, for some plastics it is better to use a hairdryer, its temperature is less (about 350 o C), but this is enough.

For the strength of the seams should be used only quality products: Different fillers and adhesives, welding electrodes and other equipment.

Buying a new bumper is not an intricate thing, but here the repair of a damaged bumper will save money and even time. The repair of plastic does not take much time and it even consider all the jewelery of work. Therefore, visit the car market is better to postpone. Give the perfect look and restore all the functions of the products, you can thanks to high-quality and operational repair.

Step-by-step bumper mining technology:

1. Specialized soldering iron on both sides of the site with a defect makes a propagation.

3. The applied grid to inner side solder.

4. In place with a defect, located outside, a special liquid plastic is applied.

5. After froze the applied plastic, the masters thoroughly sand the processing place.

6. The last steps are the primer and painting of the bumper.

To reproduce the texture and ornament on plastic products, a gel plasticizer is used. After eliminating all defects go to painting the part. Quality work Specialists guarantees the absence of any traces of damage and roughness.

We can restore the initial form of the bumper or other plastic car parts by spike, reinforcement and application special material intended for repair plastic. However, it should always be understood that not every plastic part can be repaired after destruction. In this case, our specialists can offer you new spare part at a reasonable price.

The condition of the car's salon worries motorists no less than the appearance paint coating Body. And since plastic is one of the main materials, on the basis of which the interior, its recovery is an important issue for owners of vehicles. To do this work with your own hands will not be a lot of work, if you know the main methods that are used to repair the salon. You can simply replace the item, however, some elements of plastic are very expensive, so in many cases it is more profitable to returned to them for the old look.

Plastic recovery methods

Among car lovers, there are several popular ways to extend the life of plastic parts of the cabin. Many prefer to contact specialized services, where recovery external view Plastic assigned to professionals. However, if desired, much is possible to do with your own hands. Return plastic details Attractive view can be three main ways:

• applying special paint;
• hauling leather or its substitute;
• pasting film;
• heated grinding.

Each of these methods should be considered in more detail.

Painting

One of the most simple ways Return plastic car cabin attractive look - it's painting. To carry out such repairs, the following materials will be needed with your own hands:

• special paint for plastic;
• primer;
• sandpaper with small grain;
• special putty for plastic;
• a set of tools for disassembling the cabin.

To begin with, it is necessary to dismantle the part to be restored. It is preferable to use special toolsNot to add to the surface of plastic new scratches and scratches. The dismantled parts are thoroughly cleaned from dirt and dust, after which they are degreased safe for plastic to the agent.

If there are very deep scratches, they can be carefully embedded with putty. After that, the details of the car's interior are cleaned with sandpaper with small grain.

This should be extremely careful, especially if the surface of the plastic has a corrugated structure. When painting parts with a complex and deep pattern, it is better to skip the grinding process, immediately proceeding to the next stage of repair.

Each detail is ground, stained and covered with varnish. The primer is applied in two or three layers, while after it applied it should be carefully examined with a good lighting. If there are defects, they are either grinding, or eliminate with putty. Paint as well as varnish is applied in several layers. At the end of the work, the parts are dried, installed in their place and polished.

Feathering

One of the most expensive ways to restore plastic car salon is a leather skin or its substitute. To work, you need to prepare:

• material for tightness;
• special glue;
• stationery knife and scissors;
• a tool for dismantling plastic parts from the cabin.

Salon, as in the previous embodiment, it is necessary to disassemble. Separate elements are cleansed, dried and degreased. After that, make cutting material for tightness, for which the skin or its substitute is applied to the part and is placed by the marker along the contour. At the same time, around the edges need to leave a reserve in a couple of centimeters.

Then the skin is cut and pasted on plastic. Running the material laid on the glue is conveniently rubber roller, the edges of the skin are wrapped and glued with back side, surplus are trimmed. After laying, the details are left for drying, then neatly mounted in the car's interior.

In those places where adjacent elements are installed tightly to each other, the skin is not wrapped, and it is simply neatly cut along the contour and is carefully sick.

Oklayka

Another simple way to restore the plastic salon is a vinyl film pasting. The following materials and tools are needed for work:

• vinyl film of the desired color or under carbon;
• sharp stationery knife;
• construction hairdryer with power adjustment;
• plastic or silicone spatulas;
• rubber roller.

The interior is disassembled and prepared in the same way as described above, after which the material is reproduced. To apply a film to the part, the substrate is removed from it, after which it is applied to the surface. Then, with the help of a construction dryer, the material is heated and smoothed either by special spatulas or rubber roller. Further sequence of actions is similar to repair when painting or a drawing.

Grinding with heated

The cheapest I. fast way Restore plastic parts of the car interior - it grinding with warming. This method is only suitable for non-damaged surfaces. Particularly careful should act if plastic has a corrugated structure. For this work you will need:

• construction hairdryer;
• sandpaper;
• terry towel;
• tools for cleaning and degreasing plastic.

To restore the item in this way, you do not need to remove anything and disassemble. This is especially true for those owners of cars that do not want to spend a lot of time. The specified method will also appreciate those who in the cabin details are removed with certain difficulties.

It is necessary to start working with surface cleaning - plastic thoroughly and degreases. Next, sandpaper is entering the work - if there are deep scratches and scuffs, it is better to use abrasive with large grain, and small defects are matured with emery paper p 1200.

After that, plastic warms up with a hair dryer, while at the same time a small area should be processed if the item is very large. When working with the heat source, the main thing is not to overdo it and do not melt the material. If there is no experience in such a job, it will be better to use the usual household hairdryer for drying hair - its temperature is not enough to harm the parts, but it will be quite enough to achieve the desired effect.

After warming up the surface, it is polished with a conventional terry towel, while it is important to observe the direction of movements - they should be circular. If the work is carried out by a construction hairdryer, then rubbing the towel should start slowly and neatly. If plastic is overheated, then it gives a little cool time. After such processing any shallow scratches And rubbing will disappear, and plastic will look like a new one.

Repair of plastic professionally in Moscow, repair period from 15 minutes.

We repair plastics of almost any brands, plastic products of different shape and configuration.

A breakdown of plastic products is a fairly common problem today. Many plastic products are cracking during operation, break and come into disrepair. In the restoration of broken parts, welding of plastic will help, or as it is also called this process - solder plastic.

Plastics soldering is the process requiring careful training, experience of a specialist and the correct assessment of the maintainability of the product. If you do not observe all the features of the technology, the seam will turn into a breaking and will not stand even minor loads.

How to repair a plastic part? There are several methods for welding. One of them is a rod welding with hot air. For each repaired product, a certain welding temperature is selected, otherwise the surface is simply not captured with each other. Properly selected temperature is not important in repair, you need to carefully prepare the surfaces, in a special way to enter the edges and clean the surface.

Repair the crack in plastic can be in several ways. To determine the technology of welding plastic, you need to know the nature of the damage and material of the plastic. Soldering cracks in plastic can take from 1 to several hours. The process of welding the plastic product should be carried out in accurately compliance with the temperature and other factors, to repair the plastic itself is quite problematic, there is a chance to overload a plastic part and make it unrepretentious.

Another repair method is an extrusion method. This is the most effective technique that allows products to operate hermetically and under loads. Not all products can be repaired using extrusion welding, sometimes the thickness of the material or its properties can only be repaired using a rod. To start work, it is necessary to determine the material from which the item is made, then select the work method of the work and proceed to restore the broken product. Each polymer (and their varieties are large) has its melting point, respectively, to repair it temperature mode individually for each product.

If the question arose how to close the crack in plastic? - Contact us, we will be happy to help repair.

Restoration of plastic parts is carried out only professional professionalsWhat guarantees full compliance with technology. We use certified material for restoring plastic products and parts.